• 제목/요약/키워드: WAsP

검색결과 113,898건 처리시간 0.09초

성문하압 측정방법의 타당도 분석 (The Validity Analysis between Measurement Method of Subglottic Air Pressure)

  • 박상희;정옥란;석동일
    • 음성과학
    • /
    • 제8권3호
    • /
    • pp.201-208
    • /
    • 2001
  • The purpose of the study was to examine a method most pertinent to measure subglottic air pressure. Subglottic air pressure and loudness analyses were performed on vowels /a/, /i/ and consonant /p/ in 12 normal subjects using. Aerophone II voice function. The experimental contexts were, therefore, /i:pi:pi:/ and /a:pa:pa:/. The subjects produced the intervocalic /p/ in 4 different situations: 1) /i:pi:pi:/ with voiceless /p/, 2) /i:pi:pi:/ with voiced /p/, 3) /a:pa:pa:/ with voiceless /p/, and 4) /a:pa:pa:/ with voiced /p/. A t-test and a correlation analysis revealed the following results. First, when we measured subglottic air pressure by /i:pi:pi:/, voiceless /p/ was significantly different from voiced /p/. Second, when we measured subglottic air pressure by /a:pa:pa:/, voiceless /p/ was significantly different from voiced /p/. Therefore, it was concluded that voiceless /p/ produced more accurate subglottic air pressure and clinicians needed to have patients produce accurate /p/ when measuring subglottic air pressure using Aerophone II.

  • PDF

음극표면 pH 측정에 의한 Ni-P합금의 전착기구 고찰 (Investigation of the mechanism of Ni-P alloy deposition using by in-situ surface pH measurement during electrodeposition)

  • 이규환;장도연;김동수;이상열;권식철;강성군
    • 한국표면공학회지
    • /
    • 제35권2호
    • /
    • pp.93-100
    • /
    • 2002
  • To better understand the codeposition mechanism of phosphorous, surface pH and potential of cathode were measured during electrodeposition of Ni-P alloys. The pH of cathode surface was measured using a flat-bottom glass pH electrode and a 500 mesh gold gauze as cathode. The cathode surface pH was increased with increasing the current density and always higher than the pH in the bulk solution. As a result of overplotting the surface pH and cathode potential on the Pourbaix diagram, it was found that cathode surface shift to the domain of predominant of $H_2$$PO3$-or $H_2$$PO_2$-. Additionally, new deposition mechanism was suggested that $H_2$ $PO_2$- and $H_2$$PO_3$- play important roles in the deposition reaction of Ni-P alloys.

고려인삼과 미국삼의 형질특성 및 성분비교 (Comparison of Agronomic Characteristics and Chemical Component of Panax ginseng C.A. Meyer and Panax quinquefolium L.)

  • 정열영;정찬문
    • Journal of Ginseng Research
    • /
    • 제19권2호
    • /
    • pp.160-164
    • /
    • 1995
  • This study was carried out to compare the root yields, root characters, saponin and ginsenosides contents of 6-year-old p. ginseng and p. quinquefolium. These two ginseng species showed difference in the diameter and ten비h of mainroot. The main root length or p. quinquefolium was shorter than that of p. ginseng, whereas Jakyung-jong and Hwangsook-jong of P. ginseng showed similar root length. Proximate composition were similar between the two species, however, crude fibercontent was significantly higher in main and lateral root of Jakyung-jong and Hwang sook-jong of P ginseng than P quinquefolium. In regard to mineral contents of root, P ginseng contained more Ca and Mn and less Fe and Al than P. quinquefolium. P. quinquefolium contained more of Rbl and Rd of protopanaxadiol saponin, and less or Re, $Rg_1$ and $Rg_2$ of protopanaxatriol saponin than P ginseng. However, no Rf was detected in the p. quinquefolium. Key words Panax ginseng, Panax quinquefolium, ginseng character, ginsenoside.

  • PDF

일개 지역 영아의 수면 및 포유양상에 관한 연구 (Sleep and Feeding Patterns in Infancy)

  • 김영희
    • 여성건강간호학회지
    • /
    • 제6권4호
    • /
    • pp.566-578
    • /
    • 2000
  • This study was conducted to ascertain infant's sleep and feeding patterns for the purpose of building up the positive parent-child relationship and setting up a preliminary parenting education program. The subjects were 16 infants who were cared for in their houses. The data was collected using NCASA developed by Barnard et al. from October 1st to December 3lth, 1999. The analysis of data was done with SPSSWIN for descriptive statistics and t-test, ANOVA, Correlation Analysis. The result were as follows: 1. The average day sleep of the infant was 9.51 hours, night sleep was 6.27 hours, and total sleep was 15.84 hours. The longest period of day sleep was 3.02 hours, and the longest period of night sleep was 3.72 hours. The regularity of day sleep was 34.78%, night sleep was 61.72% and total was 43.76%. 2. The frequency of daytime feeding was 5.13 times, nighttime was 2.44 times and total was 7.38 times. The regularity of feeding was 52.14%. 3. In the correlation between sleep and feeding patterns, night sleep was negatively correlated with feeding method(r=-.52, P<0.05), the longest period of day sleep was negatively correlated with feeding method(r=-.73, P<0.001), feeding frequency(r=-.60, P<0.05), the regularity of feeding(r=-.70, P<0.001). The longest period of night sleep was negatively correlated with feeding frequency (r=-.53, P<0.05). Feeding method was positively correlated with feeding frequency(r=.71, P<0.001), the regularity of feeding(r=.57, P<0.05). Day sleep was positively correlated with total sleep(r=.93, P<0.001), the regularity of total sleep was positively correlated with the longest period of day sleep(r=.54, P<0.05), total sleep(r=.65, P<0.001). The regularity of feeding was positively correlated with feeding method(r=.57, P<0.05), total feeding frequency(r=.50, P<0.05), the frequency of daytime feeding(r=.61, P<0.05). Feeding method was positively correlated with total feeding frequency(r=.71, P<0.001). In conclusion, the study showed that infants slept more in the nighttime than in the daytime, but after 3 months the pattern changed and showed that nighttime sleep was increased. Also the regularity of night sleep was increased with the infant's age. Total feeding frequency was decreased with the infant's age, and the regularity of feeding was increased in infants who slept shorter periods in the daytime than in the nighttime.

  • PDF

인공산성우 처리에 대한 삼림토양의 완충능 (Buffer Capacities of Forest Soils by the Treatment of Simulated Acid Rain)

  • 진현오;이계성;정동준
    • 한국농림기상학회지
    • /
    • 제4권1호
    • /
    • pp.49-57
    • /
    • 2002
  • 본 연구는 경기도 광주군 퇴촌면 소재 경희대 연습림의 산림토양을 대상으로 인공산성우의 회수별 유입에 따른 산림토양의 완충능에 미치는 영향을 구명하고자 pH 3.0, pH 4.0, pH 5.0 인공산성우를 하루에 1시간 간격으로 10회 유입하여 얻은 결과는 다음과 같다. 각 임지(활엽수, 리기다소나무, 잣나무, 낙엽송)의 토심별(0~15 cn, 15~30 cm) pH를 측정한 결과 모든 임지에서 토심이 깊을수록 토양 pH가 높았다. 또한 각 임지별 염기포화도를 살펴보면 리기다소나무 임지에서 17.42%로 가장 높게 나타났으며 C.E.C는 활엽수임지의 경우 29.87 me/100 g으로 가장 높았다. 인공산성우 회수별 유입 토양용탈수의 pH 변화를 보면 pH 3.0 처리에서 인공산성우 유입회수가 증가함에 따라 초기에는 일시적으로 높아지다가 다시 낮아지는 변곡성을 보였으며, 나머지 pH 4.0과 pH 5.0에서는 토양 용탈수의 pH가 비례적으로 증가하였다. 인공산성우의 pH 수준과 임지에 따라 초기 용탈량은 차이가 있으나 모든 처리에서 인공산성우의 유입회수가 증가함에 따라 염기성 이온의 용탈량은 감소하였다. 또한 pH 5.0 처리에 비하여 pH 3.0과 pH 4.0의 인공산성우 처리에서 총 염기성 양이온의 초기 용탈량이 더 컸으며 이러한 경향은 토양 산성도가 낮고 토양의 염기성 양이온이 높은 임지일수록 뚜렷한 차이를 보였다. 활성 Al의 초기 용탈은 토양 산성도가 높은 지역일수록, 인공산성우의 유입산도가 클수록 높게 나타났다. 또한 토심별로 확인해 본 결과 A층과 AB층간의 Al 용탈량도 소폭의 차이가 있음이 확인되었다. 인공산성우 pH 3.0 처리에서는 모든 임지에서 Al 활성 변화가 정의 관계를 나타내었는데 이는 pH 4.0과 pH 5.0에서의 용탈수와는 반대되는 경향이었으며, 총 염기성 양이온과도 반대되는 경향이 나타났다.

황의 친핵성 치환반응 (제13보). 메탄올-아세토니트닐계에서의 파라치환 염화벤젠술포닐의 가용매 분해반응 (Nucleophilic Displacement at Sulfur Center (ⅩⅢ). Solvolysis of para-Substituted Benzenesulfonyl Chlorides in MeOH-MeCN Mixtures)

  • 이익춘;구인선
    • 대한화학회지
    • /
    • 제25권1호
    • /
    • pp.7-12
    • /
    • 1981
  • $p-CH_3, p-H, p-Cl 및 p-NO_2 기로 치환된 염화벤젠술포닐의 가용매분해반응을 MeOH-MeCN혼합용매계에서 연구하였다. 반응속도는 p-NO_2 > p-CH_3 > p-H > p-Cl의 순위로서 비직선 Hammett관계를 나타내어 S_N1-S_N2경계반응메카니즘으로 반응함을 알았다. 반응성은 모든 경우 약 90∼95% 메탄올용액에서 최대였으나, fi = \frac{k1}{ki}로 정의되는 각 기질의 메탄올 단위체 선택성(monomer selectivity)은 80% 메탄올 용액에서 최대이며, 그 크기 순위는 p-NO_2 > p-Cl > p-H > p-CH_3$로서 전이상태 구조가 tight할 수록 fi값이 크며 메탄올 단위체를 예민하게 선별 감지함을 알 수 있었다

  • PDF

한국여성의 복압성요실금에 대한 골반저근육훈련운동과 바이오피드백요법의 효과 비교 (The Comparison of the Effectiveness of Pelvic Floor Muscle Exercise and Biofeedback Treatment for Stress Incontinence in Korean Women)

  • 최영희;성명숙;홍재엽
    • 대한간호학회지
    • /
    • 제29권1호
    • /
    • pp.34-47
    • /
    • 1999
  • This study evaluated the Comparison of the Effectiveness of Pelvic Floor Muscle exercise and Biofeedback treatment for Genuine Stress Incontinence I assigned 60 participants to 2 groups : 30 to the pelvic floor muscle exercise group and 30 to the biofeedback group. Treatment protocol lasted for 6 weeks. Peak pressure, and duration time of pelvic muscle contraction were evaluated by a perineometer. Lower urinary symptoms, sexual matter and life style scores were achieved by using Jackson's scale. The treatment efficacy of the pelvic floor muscle exercise is compared with the biofeedback group and the main results of the comparison are as follows : 1. Pelvic muscle contraction 1) The peak pressure in the biofeedback group was significantly increased(P=0.000). 2. The frequency and quantity of incontinence 1) The frequency of incontinence in the biofeedback group was significantly decreased(P=0.000). 2) The quantity of incontinence in the biofeedback group was significantly decreased(P=0.000). 3. The lower urinary symptoms Daily frequency(P=0.000), nocturia(P=0.000), urgency(P=0.000), bladder pain(P=0.000), unexplained incontinence(P=0.048), wearing protection(P=0.022), changing outer clothing(P=0.005), hesitancy(P=0.008), intermittent stream(P=0.000), abnormal strength of stream(P=0.004), retention(P=0.000), incomplete emptying(P=0.000), and inability to stop mid stream(P=0.006) of the lower urinary symptoms in the biofeedbatk group were significantly decreased. 4. The sexual matters The dry vagina (P=0.004) and pain during sexual Intercourse (P=0.002) in the biofeedback group was significantly decreased. 5. The life style The fluid intake restriction(P=0.007), affected daily task(P=0.003), avoidance of places & situation(P=0.003), interference in Physical activity (P=0.002), interference in relationship with other people(P=0.01), and feeling about the rest of life with urinary symptom(P=0.000) in the biofeedback group were significantly decreased. In conclusion, the biofeedback treatment was more effective than the pelvic floor muscle exercise in genuine stress incontinence.

  • PDF

폴리염화알루미늄 과량주입에 의한 고(高) pH 원수의 수처리효율 개선 (Improvement of Water Treatment Efficiency by Poly Aluminum Chloride Overdosing in High pH Raw Water)

  • 임재철;김진근
    • 상하수도학회지
    • /
    • 제23권1호
    • /
    • pp.39-46
    • /
    • 2009
  • A method to improve water treatment efficiency by coagulant overdosing for high pH raw water at a drinking water treatment plant (WTP) which had no pH adjusting facilities was investigated. Poly aluminum chloride (PACl) was used for coagulant, and turbidity removal efficiency was evaluated as a function of PACl dosage increases. pH and turbidity of supernatant of jar-tester were 7.10 and 0.50 NTU respectively, when the turbidity, pH, alkalinity, water temperature, conductivity of raw water were 1.75 NTU, 9.38, 46.5 mg/L, $6.4^{\circ}C$, $400{\mu}s/cm$, respectively. Turbidity of settled water was reduced from 2.18 NTU to 0.28 NTU (87% reduction) when PACl dosage was increased from 16 mg/L to 45 mg/L at a full scale WTP. This can be attributed to the recovery of coagulant efficiency by pH reduction with the increase of coagulant dose, however coagulation efficiency was reduced with the formation of Al(OH)4- by PACl addition at higher pH. Coagulant overdosing was proven to be a rapid and effective method for high pH raw water, which can be applied at drinking WTP.

승모판막치환수술 전후 심장초음파 소견의 변화에 관한 연구 (Echocardiographic Findings after Mitral Valve Replacement)

  • 이상진
    • Journal of Chest Surgery
    • /
    • 제27권8호
    • /
    • pp.656-663
    • /
    • 1994
  • Evaluation of heart function is of importance in assessing the results of valvular heart surgery. Information on volume and functional change of heart chamber can be obtained by cardiac catheterization and echocardiography. We studied 41 patients with mitral stenosis[MS] and 23 patients with mitral regurgitation[MR] using M-mode echocardiography before and after mitral valve replacement[MVR] at Pusan Paik Hospital. Preoperative cardiac catheterization was available in 56 cases, and the results were obtained as follows. 1. In patients with MS, preoperative average LV end-diastolic dimension[EDD] and end-systolic dimension[ESD] were remained within normal range, but postoperative EDD and ESD were significantly decreased[P<0.01]. The preoperative and postoperative LV ejection fraction[EF] were remained within the normal range and no significant change[P>0.05]. The preoperative left atrial dimension[LAD] was enlarged considerably above normal[P<0.01], but was significantly decreased after surgery[P<0.001]. The preoperative LV posterior wall thickness[PWTh] was within normal range, and no significant change after surgery[P>0.05]. 2. In patients with MR, preoperative average end-diastolic dimension[EDD] and end-systolic dimension[ESD] were significantly greater than normal[P<005], but postoperative EDD and ESD were significantly decreased[P<0.01]. The preoperative LV ejection fraction[EF] and fractional shortening[FS] were within normal range, and no significant change after surgery[P>0.05].The preoperative left atrial dimension[LAD] was enlarged considerably above normal [P<0.01], but was significantly decreased after surgery[P<0.001].The preoperative LV posterior wall thickness[PWTh] was within normal range, and no significant change after surgery[P>0.05].

  • PDF

Surface hardness measurement of NiP-plated AA7050

  • Moon, Sungmo;Kim, Juseok
    • 한국표면공학회지
    • /
    • 제54권4호
    • /
    • pp.171-177
    • /
    • 2021
  • This paper is concerned with the surface hardness measurement of NiP-coated AA7050 using different loads from 10 to 100 g. The surface hardness was observed to increase from 180 to 600 Hv with increasing NiP layer thickness, depending on the load applied for indentation. When NiP coating thickness is thinner than 2 ㎛, the surface hardness of NiP-coated AA7050 was mainly determined by AA7050 substrate, while it was significantly increased by NiP coating layer when NiP coating thickness is thicker than 2 ㎛. Hardness of AA7050 substrate itself was not dependent on the applied load but the hardness of NiP-coated AA7050 was largely influenced by the load applied for indentation. The largest difference of hardness between 10 g and 100g of applied loads, was obtained at the NiP thickness of about 8 ㎛ above which the measured hardness at 10 g reached a maximum value of about 600 Hv. It was also observed that indentation-induced plastic deformation next to the indented zone occurs when NiP layer is 5.64 times thicker than the depth of impression formed by indentation.