• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.913-916
• /
• 2008

변형경화형 시멘트 복합체(SHCC)의 직접인장거동은 주로 물시멘트비, 섬유와 매트릭스 간의 상호작용, 부착강도, 섬유 혼입율 등에 의해 영향을 받는다. 본 논문은 PET 및 PVA섬유를 사용한 SHCC의 직접인장거동에서 섬유의 형상비의 영향을 평가하기 위해 PET섬유의 형상비(Aspect ratio, ${\ell}/d_f$ : 150, 300, 600)를 변수로 선정하였다. 동일한 배합조건에서 PET1.5+PVA0.5-300 및 PET1.5+PVA0.5-600시험체는 PET1.5+PVA0.5-150에 비해 우수한 유사변형경화특성과 미세균열분산 특성을 보였으며, PET1.5+PVA0.5-300 및 PET1.5+PVA0.5-600 시험체는 최대인장응력시 각각 0.5, 2.0%의 변형율을 나타내었다.

• 재활간호학회지
• /
• 제6권2호
• /
• pp.226-238
• /
• 2003

This study was started for the purpose of providing the basic data for continous managment of kidney transplantation patients after discharge. This study was conducted on 180 patients who received renal transplants at three hospital( B, M, P) pusan, korea. The data collection was done for june 1, to August 31, 2002. General characteristics, renal transplantaton characteristics, physical characteristics, the level of compliance and the degree of educational demand were done by the number and percentage, the mean, standard deviation. The level of compliance and educational demand followed by the characteristics of general and kidney transplantation were analyzed by t-test and ANOVA. The result were as fallows; 1. Man was higher than woman such as 60.0%, Mean age was 42.5 years old, Average total duration of after operation was 5.5 years. 2. Cases of systolic blood pressure over 140mmHg were 10.0%, cases of diastolic blood pressure over 90mmHg were 22.8% and obesity factor in BMI was 15.6%. The person who daily water intake amount is 5000cc was 0.6%, the case that daily urine output is below 1000cc was 8.9%, and the case that urine output is zero was 0.6%. 3. The mean score of compliance was 77.47 point, The score in medication part was highest such as 4.67 point, that in stress situation was lowest such as 3.50 point. 4. The average score of educational demand was 154.02 point, and physical state part was 4.36 points highest, activation part was 3.48 points lowest. As a role of nurse Confirmation of compliance is very important encourage to make good through regular hospital visitation, point out the noncompliance part and then increase compliance of renal transplantation patient As well there will be maintain the normal kidney function to satisfy educational demand through continous education.

• 한국지반신소재학회논문집
• /
• 제19권1호
• /
• pp.55-63
• /
• 2020

본 연구에서는 다층으로 구성된 깊은 토사지반 내 박스구조물에 대하여 지진하중이 작용할 때 동적거동 특성을 규명하기 위하여 진동대를 이용한 축소모형시험과 유효응력을 고려한 내진해석을 수행하였다. 입력지진파는 장주기파(Hachinohe), 단주기파(Ofunato)와 인공지진파 및 최근 경주 및 포항지역에서 발생한 실지진파 등 5개의 지진파를 사용하여 하부지반에서 작용시켰다. 모형실험 및 수치해석 분석결과, 지진하중 작용시 박스구조물에 발생하는 변위는 연직방향이 수평방향에 비해 크게 발생하였으며, 기초지반 하부의 과잉간극수압 증가가 변위를 유발하는 것으로 확인하였다. 또한, 실지진파에 비해 인공지진파 작용시 지반 및 지중구조물의 동적거동이 크게 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.71-74
• /
• 2007

With the changes of times the building materials tend to extend the demand for application under the special environment. Since high-ductile mortar is developed, the building materials show excellent performance like toughness, compression, tensile, and bending, etc. in the general concrete from the existing brittle point. And, recently they are widely used as repairing and reinforcing materials both at home and abroad because they are recognized as excellence like durability and fire-resistance. However, it is in a situation of creating problems in durability because it frequently happened deterioration of buildings that have already repaired and reinforced at a time when it requires reconstruction of recently deteriorated construction structure recently. Therefore, in this study improved with a more repair Material development and reinforcement of the second high-ductile mortar products for a variety of basic materials were presented want, research plans used include traditional repair materials and the newly developed PCM (polymer cement mortar) structural reinforcement type indicated that comparison. PCM analysis in order to present a rate depending on the types fiber 0, 1.2 and 2.0(%) at three levels and mixture water according to ratios of weight to Plain in the 2.0 and 1.85(kg) at two levels is set, the results were as follows. 1) This study has shown that PCM had excellent strain hardening behavior at the same time that the bending stress increased according to the fiber contents. 2) This study has shown that it had the durability performance due to the high substance transmission according to the fiber contents.

• 생물환경조절학회지
• /
• 제18권2호
• /
• pp.132-136
• /
• 2009

균근을 이용한 Ardisia pusilla의 내건성 증진효과를 알아보기 위하여 내생균근 Glomus spp.을 접종하여 생육상에서 30일 동안 재배한 후 수분스트레스처리를 실시하였다. 수분스트레스처리는 5일간 무관수 상태로 두었다가 관수하는 방법으로 60일 동안 반복 처리하였다. 식물생육은 균근처리시 대조구에 비해 증가하였으며, 관수시 스분스트레스의 회복력도 빨랐다. 식물체내 양분함량은 지하부의 Fe, Mn, 및 Cu의 함량의 경우 균근 접종 식물이 대조구에 비해 현저하 높았으나 이에 반하여 프롤린 함량은 대조구에서 균근 접종식불에 비해 높게 나타났다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 춘계학술발표회
• /
• pp.161-165
• /
• 2005

Recently, it is on the increase interest for Al alloy with new material for ship application to substitute for FRP ship. The reason is thatAl alloy ship has beneficial characteristics such as high sea speed, increase of loadage and easy to recycle compared with FRP ship. In this paper, mechanical and electrochemical properties are investigated by slow strain rate test experiment in various applied potential condition. These results will provide as reference data to design ship by deciding optimum protection potential regard to hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys are not corroded with forming film which has the corrosion resistance property in neutral solution. However, it was observed that formation and destruction of passive film by $Cl^-$ ion in sea water environment. At comparison of current density after 1200 sec in potentiostatic experiment, the current density in the potential range of -0.68 $\~$-1.5 V is shown low value. The low current density means protection potential range. Elongation in applied potential of 0 V was high. However, the corrosion protection application in this condition is impossible potential because the toughness is low value by decreasing strength by active dissolution reaction at parallel part of specimen. The film composed with $CaCO_3$ and $Mg(OH)_2$ has a corrosion resistance property. However, the uniform electrodeposition coating at below -1.6 V potential is not formed since the time to form the uniform electrodeposition coating is short. Therefore, it is concluded that mechanical property is poor because effect by hydrogen gas generation is larger than that of electrodeposition coating. It is concluded that the optimum protection potential range from comparison of_maxim urn tensile strength, elongation and time to fracture is -1.3$\~$0.7 V (SSCE).

• 한국터널지하공간학회 논문집
• /
• 제19권2호
• /
• pp.195-212
• /
• 2017

운영 중 해저 터널의 안정성 평가에 응력, 수압 그리고 라이닝 및 주변지반의 강성 열화 등과 같은 다양한 계측 정보를 사용해서 역해석하면, 효율적인 오차율 이내의 결과를 획득할 수 있다. 선행 연구에서 검증된 차분진화 알고리즘 기반의 역해석 수행 시 FLAC3D 등 범용 지반해석 프로그램을 사용했지만, 상대적으로 해석시간이 오래 걸리고, 제어가 어려운 단점이 있다. 이러한 이유로, 본 연구에서는 상대적으로 해석시간이 짧게 소요되는 beam-spring 모델 기반의 FEM solver를 도입하였다. 원형 터널 단면의 구조해석이 가능한 beam-spring 프로그램을 Python 언어로 개발하여, 기구축된 차분진화 알고리즘과 결합하였다. 계측 데이터로부터 실시간에 가깝게 운영 중 터널의 안정성 평가가 가능할 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제20권3호
• /
• pp.191-205
• /
• 2020

Soil shear strength parameters play a remarkable role in designing geotechnical structures such as retaining wall and dam. This study puts an effort to propose two accurate and practical predictive models of soil shear strength parameters via hybrid artificial neural network (ANN)-based models namely genetic algorithm (GA)-ANN and particle swarm optimization (PSO)-ANN. To reach the aim of this study, a series of consolidated undrained Triaxial tests were conducted to survey inherent strength increase due to addition of polypropylene fibers to sandy soil. Fiber material with different lengths and percentages were considered to be mixed with sandy soil to evaluate cohesion (as one of shear strength parameter) values. The obtained results from laboratory tests showed that fiber percentage, fiber length, deviator stress and pore water pressure have a significant impact on cohesion values and due to that, these parameters were selected as model inputs. Many GA-ANN and PSO-ANN models were constructed based on the most effective parameters of these models. Based on the simulation results and the computed indices' values, it is observed that the developed GA-ANN model with training and testing coefficient of determination values of 0.957 and 0.950, respectively, performs better than the proposed PSO-ANN model giving coefficient of determination values of 0.938 and 0.943 for training and testing sets, respectively. Therefore, GA-ANN can provide a new applicable model to effectively predict cohesion of fiber-reinforced sandy soil.

• 대한기계학회논문집A
• /
• 제36권1호
• /
• pp.43-50
• /
• 2012

본 논문은 레이저 샥 피닝(LSP) 유한요소 시뮬레이션 관련 변수들이 인코넬 alloy 600 합금의 잔류 응력에 미치는 영향을 분석하였다. 특히, 레이저 피닝 공정 관련 변수인 최대 압력파, 압력파 지속시간, 레이저 스팟 크기 및 다중 레이저 샷의 영향을 확인하였다. 최대 압력파 및 압력파 지속시간은 alloy 600 재료물성에 따라 특정 범위에서 최대 압축잔류응력을 생성시켜 준다. 이 때문에 LSP 공정에서 최대 압력파 및 압력파 지속시간은 중요한 선택 변수가 된다. 일정한 크기 이상의 레이저 스팟은 잔류응력에 특별한 영향을 미치지 않음을 확인하였고, 다중 레이저 샷은 압축잔류응력 크기와 소성변형 발생깊이를 동시에 증가시키지만, 증가량은 레이저 샷 횟수가 증가할수록 감소하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.357-362
• /
• 2008

This study have goal with reverse engineering for petrochemistry of high pressure ball valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the petrochemistry high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the water($H_2O$). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated inlet velocity 5m/s. CFD solver used STAR-CCM+ which is commercial code. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.