• 제목/요약/키워드: WATER ANALYSIS

검색결과 21,914건 처리시간 0.058초

실내 및 현장실험를 통한 DCPT의 노상토 다짐관리기준 정립에 관한 기초연구 (Fundamental Study on Establishing the Subgrade Compaction Control Criteria of DCPT with Laboratory Test and In-situ Tests)

  • 최준성
    • 한국도로학회논문집
    • /
    • 제10권4호
    • /
    • pp.103-116
    • /
    • 2008
  • 본 연구에서는 시공시 현장다짐관리에 있어 단위중량을 이용하는 기존의 방법 대신 탄성계수와 같은 역학적 특성을 이용하는 새로운 다짐관리기준 정립을 위한 현장시험방법을 제시하고자 한다. 이를 위하여 시험법이 간편하며, 활용성이 증가하고 있는 동적콘관입시험인 DCPT 측정시험이 노상토의 다짐품질관리의 적용이 가능한지를 검토하였다. DCPT 시험방법이 현장에서 다짐후 설계탄성계수를 추정할 수 있는지를 확인하기 위하여 실내토조시험, 현장시험을 실시하였고, 노상층의 DCPT, CBR, 회복탄성계수간의 상관관계를 분석하였다. 또한, 문헌조사 분석을 통하여 DCPT 시험간격을 제시하였다. 실내시험결과를 분석한 결과, DCPT 관입치 (PR) 값과 CBR값 간의 상관관계식에서는 Livneh 식이 가장 부합됨을 알 수 있었고, DCPT 시험을 통한 PR값을 국내외 탄성계수 추정식을 평가한 결과, 예측 $M_R$ 탄성계수 값과 부합하는 제안식으로는 George와 Pradesh의 식이 있었으며, FWD를 이용한 $M_R$ 제안식을 비교한 결과, Cudishala의 제안삭은 예측 $M_R$ 값보다 다소 크게 산정되며, Chen의 제안식의 경우 다소 작은 값을 보이고, 건설기술연구원의 제안식은 예측 $M_R$값에 과소 평가함을 알 수 있었다. 그러나 실제 차량이 유발하는 주행속도에 따른 축차응력과 구속응력으로부터 실내 $M_R$ 시험결과를 비교분석한 결과, 건기원 제안식이 가장 적합함을 알 수 있었다. DCPT 현장시험결과를 분석한 결과, 관입지점의 입도분포에 따라 PR 값에 오차가 생길 수 있음을 알 수 있었고, 오차를 감소하기 위한 DCPT 시험간격에 대한 추천값을 제시하였다. 현장시험결과를 분석한 결과 현장 다짐도를 만족하는 노상이라 하여도 노상 재료에 따라 평균 PR 값이 다르게 나타났으며, 특히 입경이 큰 재료일수록 평균 PR 값이 작음을 알 수 있었고, 현장함수비의 경우 다짐도에 미치는 영향은 상당히 크나, DCPT 시험에 있어서 현장함수비 변화는 평균PR값에 미치는 영향이 미미함을 알수 있었다.

  • PDF

수리불안전답에서의 벼 품종별 생육 및 수량구성요소 특성 변이 분석 (Analysis of Growth Characteristics and Yield Components According to Rice Varieties Between on Irrigated and Partially Irrigated Rice Paddy Field)

  • 김태헌;허연재;오성환;이지윤;조준현;한상익;이종희;백동원;송유천;최원영;남민희;박동수;권영업;신동진
    • 한국작물학회지
    • /
    • 제61권1호
    • /
    • pp.17-24
    • /
    • 2016
  • 국내 가뭄 조건에서의 벼 품종별 재배안정성을 평가하기 위한 인위적인 가뭄 처리 조건(수리불안전답 조건)에서 생육 특성과 쌀수량 조사하고 쌀수량 감소 요인을 분석한 결과는 다음과 같다. 1. 수리불안전답 조건에 의한 경수 및 이삭수 감소율은 품종에 따라 각각 10.7%에서 33.1%와 10.5%에서 30.1%였으며, 공시품종 중 '새일미', '일미'가 경수 및 이삭수 변화가 적었으며, '오대'와 '운광', '추청' 품종에서 경수와 이삭수 감소가 크게 나타났다. 2. 수리불안전답 조건에서의 쌀수량은 품종에 따라 수리안전답 조건보다 9.9%에서 33.3% 감소하였으며, 쌀수량 감소가 적은 품종은 '새일미'와 '주남', '일미'였으며, 감소율이 큰 것으로 조사된 품종은 '오대'와 '칠보', '호품' 등 이였다. 3. 수리불안전답 조건에 의한 생육초기 경수 발달 부진과 이의 영향에 의한 이삭수 감소가 쌀수량 감소에 가장 큰 영향을 준 것으로 분석되었다. 4. 본 연구에서 수리불안전답 조건에서의 쌀수량 감소를 분석한 결과, 국내 기상조건에서 발생할 수 있는 가뭄은 생육후기보다 생육초기의 경수 발달에 크게 영향을 주는 것으로 확인되었다. 따라서 농업용수 공급이 원활하지 않는 수리불안전답의 경우 가뭄에 대비하기 위하여 '새일미'와 '일미', '일품' 품종 같은 가뭄에 대한 재배안정성이 우수한 품종을 재배하는 것이 적당하다고 판단된다.

4개 간척 지구에 분포하는 식생과 토양 염류농도 (Soil Salinity and Vegetation Distribution at Four Tidal Reclamation Project Areas)

  • 이승헌;지광재;안열;노희명
    • 한국환경농학회지
    • /
    • 제22권2호
    • /
    • pp.79-86
    • /
    • 2003
  • 토양 제염이 토양 화학성 변화와 식물 분포에 미치는 영향을 분석하여 간척농경지의 효율적인 관리방안에 대한 기초자료를 확보하고자 본 연구를 실시하였다. 방조제 체절전후 자연식생이 존재하는 9개 지점에서 식생분포 특징을 조사하고 2개 지점에 대해서는 토양과 식생간의 관계를 검토하였다. 9개 조사지점에서 11목, 14과, 46속, 49종, 8변종, 1품종등 총 58종류의 식생분포가 관찰되었고 자연상태를 잘 유지한 대호식생보전구와 석문 국가공단 예정 부지에서의 출현종수가 다양하게 분포하였으며 해수를 유통시키고 있는 홍보지구나 만경강, 동진강 하구의 식생은 10여종정도로 단순하였다. 9개 조사지점에서 가장 빈도가 높게 출현한 종은 벼과, 명아주과, 국화과에 속하는 나문재(Suaeda asparagoides (Miq.) Makino), 갯개미취(Aster tripolium L.), 갈대(Phragmites australis Trin.), 해홍나물(Suaeda maritima Dum.), 칠면초(Suaeda japonica Dum.), 천일사초(Carex scabrifolia Steud.)등이었다. 통양의 제염에 따라 염류-나트륨성(Saline-내??) 토양에서 염류(Saline) 토양으로 그리고 최종적으로 일반 토양으로 변화하였다. 명아주과의 식생은 염도(ECe)가 30 dS/m 전후인 토양에서 출현하여 10 dS/m까지 지속되고, 20 dS/m 전후에서 갯개미취, 산조풀, 사데풀 등이 출현하였으며 10 dS/m 이하에서는 일반육상에서 볼 수 있는 식생종들이 출현하였다. 그러나 토양제염과 동시에 식생의 천이가 일어나는 것은 아니며, 외부에서 종자 등의 식물이 유입될 확률이 있어야하므로, 초기간척지의 식생을 조기에 정착하기 위해서는 토양검정을 통해 적정 염도에서 정착할 수 있는 식생의 인공식재 내지 종자 산파를 통해 촉진시키는 것이 효과적일 것으로 판단된다.25\;{\pm}\;0.32$분, 제 2 군이 $3.05\;{\pm}\;0.34$분으로 두 실험군간 통계학적으로 유의성 있는 차이가 없었다. 근관 충전재의 제거 후 근관 벽의 청결도는 두 실험 군 모두에서 치관부 1/3이 중간이나 치근단 1/3보다 우수한 결과를 보였으며 두 군 간의 차이는 없었다. 본 실험을 통해서 새로운 근관 충전 재료인 Resilon이 기존의 가타퍼챠와 실러를 사용한 충전과 비슷한 정도의 제거 용이성 및 근관 벽의 청결도를 보였음을 알 수 있었다.0 일 ), $1.1{\sim}5.6$ ( 평균: 2.9, 표준 편차: 0.8) 이었다. 단변 수 분석상 FRS, PVC, 체외 순환시간 (CPB) 및 술 후 12 시간째의 중심 정맥압 등이 LIT와 연관되었으나, 다변수 분석상 PVC (p=0.0018) 및 CPB (p=0.0024)만이 독립적으로 LIT를 예측하였다. 두 변수는 LIT 변이에 대하여 21.7%의 설명력이 있었으며, 두 변수를 이용한 회귀 분석식은 다음과 같았다. LIT=2.74-0.0158 PVC+0.00658 CPB. 결론: 새로이 정의된 폐혈관 유순도는 심장 외 도관을 이용한 단심실 교정 후의 흉관 거치 기간을 결정하는 중요한 예측 인자로서, 수술 전 위험 인자 분석에 유용하게 사용될 수 있다.그것의 분별도 하지 못하는 세상 사람들을 완농(玩弄)하였다. 그러므로 그는 진환(塵 )에서 초연(超然)했던 것이다. 천석고황(泉石膏 )으로 태평성대(太平聖代)에 사시가흥(四時佳興)을 한가지로 하는 퇴계와는 그래서 다르다. 퇴계는 순풍(淳風)과 어진 인성(人性)을 긍정하였기에 만족하고. '고인(古人)의 녀던 길'을 끊임없이 행(行)하고자 하였다. 여기에서 '완세불공(玩世不恭)'과 '온유돈후(溫柔敦厚)'가 판별되어진다. 장육당이 '완세불공(玩世不恭)'했다면, 그것은 자취(自取)한 것이요.

불화수소(弗化水素)가스에 의(依)한 수도(水稻) 및 잡초(雜草)의 피해(被害) 조사연구(調査硏究) (Studies on the Effects of Hydrogen Fluoride Gas in Paddy Rice and Weeds at Fluorine Damaged Site)

  • 김복영;조재규
    • 한국환경농학회지
    • /
    • 제2권2호
    • /
    • pp.98-102
    • /
    • 1983
  • 양평(楊坪) 산간계곡(山間溪谷)의 수도(水稻) 및 산야초(山野草)의 피해(被害)는 현지(現地)의 피해상황(被害狀況), 피해증상(被害症狀)과 식물체중(植物體中)의 불소함량(弗素含量) 및 무기성분량(無機成分量)의 변화(變化)를 조사(調査)한 결과(結果)는 다음과 같다. 1) 수도(水稻)의 엽피해정도(葉被害程度)는 100m 지점(地點)까지는 95%, 500m 지점(地點)에서는 65%, 2㎞ 지점(地點)에서는 5%정도(程度)였다. 2) 피해증상특미(被害症狀特微) ${\cdot}$ 수도(水滔) : 심(甚)한 것은 백색(白色)으로 고사(枯死)하고 경미(輕微)한 것은 엽선단부위(葉先端部位)에 백색(白色)이나 적갈색(赤褐色)이 발견(發見) ${\cdot}$ 잡초(雜草) : 심(甚)한 것은 적갈색(赤褐色)으로 고사(枯死)하고 경미(輕微)한 것은 엽선단(葉先端)이 적갈색(赤褐色)으로 고사(枯死) 3) 식물체중(植物體中) 불소함량(弗素含量) ${\cdot}$ 수도(水稻) : 엽중(葉中) 불소함량(弗素含量)은 $170{\sim}3,225ppm$이고 근(根)에서는 $68.8{\sim}3,000ppm$이었으나 엽선단(葉先端)의 피해부위(被害部位)가 엽중심부(葉中心部) 보다 불소함량(弗素含量)이 $3{\sim}20$배(倍)많았다. ${\cdot}$ 잡초(雜草) : 무피해엽중(無被害葉中) 불소함량(弗素含量)은 $10{\sim}15ppm$이고 피해엽(被害葉)은 $130{\sim}242.5ppm$이였고, 엽선단(葉先端)의 피해부위(被害部位)는 중심부보다 $1.2{\sim}7$배정도(倍程度) 많았다. 4) 피해엽(被害葉)의 선단부위(先端部位)에 CaO, $K_2O,\;SiO_2$ Fe, 및 Mn 등(等)이 축적(蓄積)되었다. 5) 피해(被害)가 가장 적은 식물(植物)은 댕댕이덩굴이며 피해(被害)가 심(甚)한 식물(植物)은 산딸기, 두릅나무 등(等)이었다. 이상(以上)의 조사결과(調査結果) 본(本) 피해(被害)는 피해지(被害地) 린근(隣近)에서 불화수소산(弗化水素酸)을 리용(利用)한 세멘트 경화제(硬化劑) 제조시(製造時) 발생(發生)한 불화수소(弗化水素)가스에 의(依)한 피해(被害)로 판단(判斷)되었다.

  • PDF

용존유기탄소의 δ13C : 분석시 고형화 전처리 방법 비교 알칼린 과황산칼륨산화 탄산침전과 동결건조 (Comparison of Solidification Pre-treatment Methods for the Determination of δ13C of Dissolved Organic Carbon: Alkaline Persulfate Oxidation-Carbonate Precipitation vs. Freeze Drying)

  • 전병준;박현진;최우정;박용세;이상모;윤광식
    • 한국환경농학회지
    • /
    • 제36권2호
    • /
    • pp.113-118
    • /
    • 2017
  • DOC의 ${\delta}^{13}C$은 수질 오염원 규명에 활용할 수 있는 매우 유용한 지표이다. 본 연구에서는 안정성동위원소비 질량분석기(EA-SIRMS)를 이용하여 DOC의 ${\delta}^{13}C$을 분석할 때 사용하는 두 가지 전처리방법 (과황산칼륨산화-$SrCO_3$침전법과 동결건조법)의 정확도를 비교 평가하였다. 표준물질로는 글루코스(${\delta}^{13}C$; $-12.0{\pm}0.02$‰)와 돈분퇴비 침출액 건조분말(${\delta}^{13}C$; $-23.3{\pm}0.04$‰)을 사용하였다. 과황산칼륨산화-$SrCO_3$ 침전법에서는 용액의 알칼리성에 의해 DIC 제거가 어렵고 공기 중 $CO_2$의 영향에 의해 시료가 오염되어 분석결과의 정확도가 매우 낮았다. 반면, 동결건조법은 산 첨가에 의해 제거가 가능하였고, 측정값과 이론값의 상관관계가 매우 높아 실험조건별로 표준물질을 이용하여 측정값을 이론값에 근접하게 보정할 수 있는 것으로 나타났다. 따라서, EA-SIRMS를 이용하여 DOC의 ${\delta}^{13}C$ 분석시 동결건조법으로 시료를 전처리하면 분석결과의 정확도를 증대시킬 수 있을 것으로 판단된다.

어도를 통과하는 어류의 형태 체형비 평가 (Assessment of fish fineness ratios passing through a fishway)

  • 문운기;배대열;김도현;신현범;서정빈;임경훈;이의행;유재상;안광국;김재구
    • 환경생물
    • /
    • 제37권4호
    • /
    • pp.726-734
    • /
    • 2019
  • 본 연구에서 국내 어류 분류군별 체형비(Fineness Ratios; FR)를 분석한 결과 일부 잉어과와 납자루아과, 꺽지과, 검정우럭과 등의 어류 체형비가 상대적으로 낮았고, 그 외 분류군별 어류의 체형비는 4.5 이상으로 대부분 유영력이 뛰어난 것으로 나타났다. 유영성 어류를 대상으로 체장-체고비에 따른 서식지 선호를 분석한 결과 크게 3가지 어종타입은 구분되었다. 유영력이 낮은 납자루-붕어형은 체형비는 2.1~3.3 범위이며, 유선형의 비율을 가지는 피라미-참갈겨니형은 체형비가 3.7~5.2 범위였다. 은어-누치형은 체장이 체고의 5배 이상으로 유영력이 뛰어난 형태를 가지고 있었다. 어류 체형비에 따른 서식지 유형을 구분하면 붕어-납자루형은 흐름이 완만한 소(Pool habitat)형태의 서식지를 선호하는 어종 우세하였고, 반면 피라미-참갈겨니형, 은어-누치형의 경우 유속이 빠른 여울형서식지(Riffle habitat)를 선호하는 어종들로 구성되었다. 조사기간 동안 어도를 이용한 어류의 상대풍부도를 분석한 결과, 대부분의 어종들이 피라미-참갈겨니, 은어-누치형에 속하는 유영성이 높은 어류들로 확인되었다. 어도 내 유속이 0.5~1.0 m s-1 범위에서 이용 어종의 FRs는 4.5~5.0 범위로 나타나 대부분 유영성 어종들이 어도를 주로 이용하는 것으로 나타났다.

Detection of Campylobacter jejuni in food and poultry visors using immunomagnetic separation and microtitre hybridization

  • Simard, Ronald-E.
    • 한국어업기술학회:학술대회논문집
    • /
    • 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
    • /
    • pp.71-73
    • /
    • 2000
  • Campylobacter jejuni is most frequently identified cause of cause of acute diarrhoeal infections in developeed countries, exceeding rates of illness caused by both salmonella and shigilla(Skirrow, 1990 ; Lior 1994). Previous studies on campylobacter jejuni contamination of commercial broiler carcasses in u.s.(Stern, 1992). Most cases of the disease result from indirect transmission of Campylobactor from animals via milk, water and meat. In addition to Campylobactor jejuni. the closely relates species Campylobactor coli and Campylobactor lari have also been implicated as agents of gastroenteritis in humans. Campylobactor coli represented only approximately 3% of the Campylobactor isolates from patients with Campylobactor enteritis(Griffiths and Park, 1990) whereas Campylobactor coli is mainly isolated from pork(Lmmerding et al., 1988). Campylobactor jejuni has also been isolated from cases of bacteremia, appendicitis and, recently, has been associated with Guillai-Barre syndrome(Allos and Blaser, 1994; von Wulffen et al., 1994; Phillips, 1995). Studies in volunteers indicated that the infectious dose for Campylobactor jejuni is low(about 500 organisms)(Robinson, 1981). The methods traditionally used to detect Campylobactor ssp. in food require at least two days of incubation in an enrichment broth followed by plating and two days of incubation on complex culture media containing many antibiotics(Goossens and Butzler, 1992). Finnaly, several biochemical tests must be done to confirm the indentification at the species level. Therfore, sensitive and specific methods for the detection of small numbers of Campylobactor cells in food are needed. Polymerase chain reaction(PCR) assays targeting specific DNA sequences have been developed for the detection of Campylobactor(Giesendorf and Quint, 1995; Hemandex et al., 1995; Winter and Slavidk, 1995). In most cases, a short enrichment step is needed to enhance the sensitivity of the assay prior to detection by PCR as the number of bacteria in the food products is low in comparison with those found in dinical samples, and because the complex composition of food matrices can hinder the PCR and lower its sensitivity. However, these PCR systems are technically demanding to carry out and cumbersome when processing a large number of samples simutaneously. In this paper, an immunomagnetic method to concentrate Campylobactor cells present in food or clinical samples after an enrichment step is described. To detect specifically the thermophilic Campylobactor. a monoclonal antibody was adsorbed on the surface of the magnetic beads which react against a major porin of 45kDa present on the surface of the cells(Huyer et al., 1986). After this partial purification and concentration step, detection of bound cells was achieved using a simple, inexpensive microtitre plate-based hybridization system. We examined two alternative detection systems, one specific for thermophilic Campylobactor based on the detection of 23S rRNA using an immobilized DNA probe. The second system is less specific but more sensitive because of the high copy number of the rRNA present in bacterial cell($10^3-10^4$). By using specific immunomagnetic beads against thermophilic Campylobactor, it was possible to concentrate these cells from a heterogeneous media and obtain highly specific hybridization reactions with good sensitivity. There are several advantages in using microtitre plates instead of filter membranes or other matrices for hybridization techniques. Microtitre plates are much easier to handle than filter membranes during the adsorption, washing, hybridization and detection steps, and their use faciilitates the simultanuous analysis of multiple sample. Here we report on the use of a very simple detection procedure based on a monoclonal anti-RNA-DNA hybrid antibody(Fliss et al., 1999) for detection of the RNA-DNA hybrids formed in the wells.

  • PDF

Polyamide 조리기구로부터 Ethylenediamine 및 Hexamethylenediamine의 이행에 관한 연구 (A Study on Migration of Ethylenediamine and Hexamethylenediamine from Polyamide Utensils)

  • 엄미옥;곽인신;윤예정;전대훈;최현철;김형일;성준현;박나영;김소희;이영자
    • 한국식품위생안전성학회지
    • /
    • 제25권1호
    • /
    • pp.36-42
    • /
    • 2010
  • 식품유사용매 중 EDA 및 HMDA 분석법을 확립하고, 국내유통 재질 조리기구 124건에 대하여 식품유사용매별 이행량을 조사하였다. EDA 및 HMDA를 ethyl chloroformate로 디우레탄 유도체화한 후 GC/FID로 정량 또는 GC/MS로 확인하였다. 확립된 분석방법은 EDA 및 HMDA 각각에 대하여 LOD $0.3\;{\mu}g/mL$$0.1\;{\mu}g/mL$이었으며, 상판계수($r^2$) 0.999이상의 직선성 및 식품유사용매별로 88% 이상의 회수율을 확인할 수 있었다. 확립된 정량분석방법을 적용하여 식품유사용매별 이행량을 조사한 결과, EDA는 식품유사용매로 물을 사용한 경우 2품목에서만 각각 $1.31\;{\mu}g/mL$$2.06\;{\mu}g/mL$ 수준으로 검출되었으며, 나머지는 모두 불검출이었다. HMDA는 식품유사용매로 20% 에탄올을 사용한 경우 3 품목에서 $0.27{\sim}0.93\;{\mu}g/mL$, n-헵탄을 사용한 경우 10 품목에서 $0.26{\sim}0.44\;{\mu}g/mL$으로 검출되었으며, 나머지는 모두 불검출이었다. 본 연구에서 확인된 이행량은 유럽연합의 EDA 및 HMDA 각각의 이행기준인 $12\;{\mu}g/mL$$2.4\;{\mu}g/mL$과 비교 시 매우 낮은 수준이었다.

수중 무선 전화기의 설계 - 수중무선전화기 설계를 위한 수중소음분석을 중심으로- (The Design of Wireless Underwater Telephone -Analysis of Underwater Background Noise for Wireless Underwater Telephone Design -)

  • 박문갑;윤갑동;김석제;윤종락
    • 수산해양기술연구
    • /
    • 제37권4호
    • /
    • pp.302-307
    • /
    • 2001
  • 본 연구는 잠수기 어업용 수중무선전화기를 설계하는데 있어 최적의 반송 주파수와 송신 신호의 음원 준위를 결정할 목적으로 우리 나라 잠수기 주 조업장의 하나인 거제와 통영 해역의 해양 배경소음과 조업중인 잠수기 어장의 수중 소음에 대하여 검토, 고찰한 결과를 요약하면 다음과 같다. 1. 거제와 통영의 잠수기 어장의 해양 배경 소음을 분석한 결과, 음압 준위는 25∼301kHz 부근에서 가장 낮아 52∼57dB이었고, 주변 통항 선박량과 산업시설이 많은 거제 해역이 통영 해역보다 약 5dB 더 높았다. 2. 거제와 통영의 잠수기 어선의 조업중의 수중소음을 비교하면, 최저 음압준위는 30kHz 부근에서 거제 어장에서는 67dB로서 통영의 62d묘보다 5dB 높은 음압 준위를 나타냈다. 이것은 거제 해역은 잠수기 어선의 규모도 통영 해역의 잠수기 어선보다 약간 크고, 분사기를 사용하여 작업하는데 비해 통영 해역은 잠수기 어선의 크기도 상대적으로 작고, 주 어획 대상물이 달라 분사기를 사용하지 않는 것이 그 원인으로 판단된다. 3. 거제 해역의 패류 채취용 분사기를 사용할 때의 수중 소음의 음압 준위는 102dB었다. 4. 거제 해역의 조업중에 대한 수중 배경 소음을 67dB라 가정할 때, 최대 500m까지 통화하기 위한 송신 신호의 음원 준위는 131dB 정도이다. 그러나, 통영 해역의 잠수기 조업은 분사기를 사용하지 않는 조업으로 이 경우 배경 소음은 약 62dB로서 송신 신호의 음원 준위는 126dB정도이다. 잠수기 조업중이 아닌 경우 즉, 스쿠버 다이버용 수중무선 전화기인 경우에는 배경 소음이 52∼57dB이므로 송신 신호의 음원 준위는 l16∼121dB이면 될 것으로 판단된다. 협동학습 모형이 수학 수업에 보다 발전적으로 널리 적용되기를 기대한다.cal results well visualized the streamlines, pressure fields, and speed vectors of a simple cambered and slot cambered otter board with slot size 0.02C. The slot cambered one with slot size 0.02C was shown that pressure field was distributed moderately on front and back side of otter board. And, the delay and decrease of separation were favorably achieved by flow through slot. 4. Computed result on the pattern of hydrodynamic field and the values of C/sub L/ and C/sub D/ by the commercial CFD code, FLUENT, show almost the same as those of the experimental result.erence was found in its fragrance. And, no difference was found in brightness and viscosity between samples. As a result of conducting the palatability test, no difference was showed in the appearance, but as for the overall palatability

  • PDF

아말감의 구강내 부식 및 인공 부식에 관한 연구 (A STUDY ON IN VIVO AND IN VITRO AMALGAM CORROSION)

  • 임병목;권혁춘;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제22권1호
    • /
    • pp.1-33
    • /
    • 1997
  • The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

  • PDF