• 한국의류학회지
• /
• 제20권6호
• /
• pp.1039-1047
• /
• 1996

The purpose of this study is to examine and to evaluate the properties of pile materials to produce velvet fabrics which have excellent handle. In order to perform this purpose, the mechanical properties, hand value (H.V.), total hand value (T.H.V.), total appearance value (T.A.V.) of acetate, cuprammonium rayon, cotton materials for velvet as the typical commercial Pile fabric were measured and analyzed by KES-F system. The important results obtained by this study are as follows. 1 For acetate pile, elogational deformation was easy and bending rigidity of weft was high and elastic recovery was excellent compared with the other materials. 2. Cuprammonium rayon velvet was shown that pile bending rigidity and hysterisis were low. Cotton velvet was shown that compressional energy was high and compressinal elasticity was exellent. 3. In the case that specimens were applied by men's winter suit program, H.V was shown that Koshi of acetate velvet was similar to that of cotton. Numeri of cuprammonium rayon velvet was higher than the others and Fukurami values for all of the three fabrics were similar. 4. But in case that specimens were applied by women's winter suit program Koshi of cuprammonium rayon velvet was lower. But Numeri of that was higher than the others and Fukurami for all of the three fabrics were similar and Sofutosa of cotton velvet was lower than the others. T.H.V. of the acetate velvet was the highest in men's winter suit program while cuprammonium rayon velvet was the highest in women's winter suit program T.A.V. of acetate velvet was highest.

• Journal of Chest Surgery
• /
• 제22권4호
• /
• pp.648-654
• /
• 1989

A clinical study was performed on 363 cases of pulmonary tuberculosis treated surgically resection during the period of 3 years from January, 1986 to December, 1988 in the National Kong-Ju Hospital. The results obtained are follows: 1. The ratio of male to female was 1.6:1 in male predominance, age from 20 to 40 occurred 82.6% of the total cases. 2. The moderately advanced cases was the highest incidence with 53.2 % for extent of disease, duration of illness which 1 to 5 years before operation was 40.8 % of the total cases. 3. Preoperative sputum examination for AFB was 53.2 % in negative but in spite of chemotherapy, persistent positive sputum was 46.7%. 4. Indication for surgery were: total destroyed lung was 35.5 %, destroyed lobe or segment with or without cavity was 30.6%, empyema with or without bronchopleural fistula was 8.5%, according to type and site of surgical procedure, pleuropneumonectomy and pneumonectomy was the highest incidence with 53.4 %, left site was slightly more than right with 55.9 % of the total cases. 5. The incidence of postoperative complication was 10.2 % and then the highest incidence was empyema with or without bronchopleural fistula with 4%, according to type of surgical procedure, postpleuropneumonectomy and postpneumonectomy was 6.1 % of the total cases. 6. Postoperative mortality was 1.4 % of the total cases, according to cause of deaths, hypovolemic shock due to bleeding were 2 cases, respiratory failure were 2 cases and hepatic coma due to hepatic failure was 1 case.

• 한국환경보건학회지
• /
• 제9권2호
• /
• pp.19-30
• /
• 1983

This report is intended to find out the health status of the korean industrial workers based on the periodic physical examination in 1982. It has resulted in the followings: 1. As of April, 1982, total No. of industries was 81,136 of which workers was totally 3,383,700 persons classifying into 2,163,600 in male and 1,220,100 in female, and manufacturing field was occupied 44.6% of total industries and 61.0% of total workers. 2. In view of size, industries having less than 9 ordinary workers was 47.5%, those having less than 29 ordinary workers was 77.0%. 3. Applicable target industries to industrial safety & health law was 31,059 which was covered 38.3% of total establishments and No. of workers was 2,192,511, 64.8% of all industrial workers. 4. No. of establishment & workers conducting the physical examination was 26,463 which is 85.2% of all examining industries and was 2,007,091, 91.5% of all examining required workers. 5. Case having general disease by general physical examination was 3.5% of examining workers and especially it was appeared 9.7% in mining. 6. Case having general disease by special physical examination was 3.8% of examining workers and incidence rate for occupational disease was 2.4% of examining workers. 7. No. of the occupational diseased was 5,341 persons which is 2.6% of all the examining workers, 205,497 and its rate was appeared highly as 7.5% of silicosis in mining workers and 1.4% of hearing difficulty to noise in construction.

• 복식
• /
• 제36권
• /
• pp.109-119
• /
• 1998

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of Caseaslpinia Sappan, L. and Brazilin were studied. Appropriate extraction, dyeing and mordanting condition of Caeaslpinia Sappan, L. were determined, and the effect of mordanting method on dye up-take adn color fastness of dyed fabric was investigated. The most absorbance of Caeaslpinia Sappan, L. solution was 445nm, Brazilin was 448nm. The color of bazilin solution was affected by pH 7~9. The optimum temperature to extract Caesalpinia Sappan, L. was 10$0^{\circ}C$ adn dyeing solution for 1 hour. In case mordants concentration, the most absorbance was 0.3%. In case mordanting test, the best and proper temperature to quantities of absorbed mordants in silk was 8$0^{\circ}C$ and the most quantities of absorbed mordants in silk was mordant treatment by Cu. Effective dyeing time to silk was 60min. Effective mordanting temperature was 8$0^{\circ}C$, and its time was 30min. K/S value of dyeing fabrics was recoginazed by mordanting treat-ment, specially Fe, Sn, Al, Cu. K/S value of pre-mordanting was higher than post-mordanting. After soaping treatment K/S value of pre- and post-mordanting silk was decreased and 0.1%(W/V) quantity of mordant was sufficient for treatment. In the case of Caeaslpinia Sappan, L. fastness was increased by mordanting treatment. Mordants and mordanting treatment method affected the amount of absorption and color change of dyed silk.

• 복식문화연구
• /
• 제9권2호
• /
• pp.250-258
• /
• 2001

The objective of this study was to trace and to identify the meaning of jeobli接籬. This word is found as one of the early costume terminologies of China. later the jeobli was introduced to Koguryo. The jeobli of China and Koguryo were included in this study. Sources of information for this research were collected from the written records including visual information from ancient paintings and tumb paintings as well as figurins. The results of important findings and conclusions of this study can be summerized as follows: It was found that the jeobli 接籬 was synonymous with the cheobli 睫離. Also it appeared that it was called baikrosa. It revealed that the word jeobli had different meanings. first, ti was the name of a white hat which was worn by the people of Chin dynasty. It was a white felt hat made of white great plumes and feathers. Second, it was a dialect for maqna, a kind of a veil which was worn by the women of the Northern dynasty. That, it meant the chaikkun, a kind of knot coverings. The jeobli, a kind of a white felt hat, was also used by the people of Koguryo. The jeobli of Koguryo was made of the pig hair from Malgal. It is considered that he shape of this white hat seems to be a kind of conical hat. Also, it was fond that the jeobli as the meaning of chaik kun was worn by the people of Kogure. it was a small white square hat. It was worn by the nobles.

• 한국식품영양과학회지
• /
• 제30권2호
• /
• pp.256-260
• /
• 2001

This study was carried out to investigate effect of ultrasonic treatment on the quality of frying chicken meat. Moisture content of ultrasonic treated leg meat was lowest to 59.7%, moisture content of breast meat was higher than leg meat and protein content of control was higher than ultrasonic treatment. Fat content of ultrasonic treatment was higher than control and leg meat was higher than breast meat. Hunter's L (lightness) and a (redness)-value was not different between frying methods, but L-value of breast meat and a-value of leg meat was higher than leg and breast meat, respectively. Hunter's b (yellowness)-value was not different among frying chicken meats. Frying loss of ultrasonic treatment was significantly lower than control, water holding capacity was higher than control. VBN content of ultrasonic treatment was comparatively higher than control, TBA number of ultrasonic treatment was highest to 0.78mg malonaldehyde/kg. Hardness, springiness and cohesiveness of frying chicken meat was not different between frying methods, but difference of chicken muscle parts were significantly showed. Chewiness was not different among frying chicken meats and shear force value of control breast meat was lowest to 1.9kg. In case of sensory score, aroma and taste of frying chicken meat were out different between frying methods, but texture, juiciness and palatability of ultrasonic treatment were higher than control and that of breast meat were higher than leg meat.

• 패션비즈니스
• /
• 제12권2호
• /
• pp.1-11
• /
• 2008

The purpose of this study is to explore to determine the maximum volume with doing permanent waving in flat crown of the head. The method was like this. First of all, the diameter, the ratio of the circumference of a circle to its diameter and the number of rotations were analyzed same hair using permanent waving rods each number of 1$\sim$10. Secondly, the increasing rate of volume of curls number of 1$\sim$10 was analyzed. According to the result of the experiment, as the number of permanent waving rods were bigger, the ratio of the circumference of a circle to its diameter constant was increasing but the number of rotations was decreased. When the permanent waving rods of each number 1-3(Big diameter) were used, the volume was decreased. That's because there was fewer rotation compared to the diameter and was no ample combed dried hair. Due to this kind of reason, there was no perfect curling. Once number 10 permanent waving rods (most small size) was used, the shape of curling was strong and the stability was made after combed dried hair. But volume was decreased by 9% because of the cohesive power. In case of number of 4$\sim$9 rods used, volume was increased. Volume was highest when permanent waving rods was number 5 which was used combing on base both morphology and numerical value.

• 동아시아식생활학회지
• /
• 제9권4호
• /
• pp.468-474
• /
• 1999

To make rice cake with squid ink, the squid ink dilulted in fifteen times was added to rice flour in the ratio of 0%, 2%. 4%, 6% and 8% respectively. Then, the squid inky rice cake was tested in physical function and chromaticity. Rheometer test was also included in this experiment. In physical function test, it showed that the inky rice cake with 6% and 8% ratio was the best in preference. In the chromaticity test, as the adding ratio of squid ink increases, the brightness decreased. The red and yellow brightness of 8% inky rice cake showed high. The results of rheometer test are as follows. In hardness, the inky rice cake with 2% adding ratio was high and the 6% inky rice cake was low. In cohesiveness, the 0% inky rice cake was high and the 8% inky rice cake was low. In gumminess, the 2% inky rice cake was high and the 6% inky rice cake was low. In brittleness, the 2% inky rice cake was high and the 6% inky rice cake was low. With correlation analysis, 1 could reach the following. The overall quality of inky rice cake was correlated with all test items except chewiness. The moistness was correlated with flavor, grain and chewiness. Also, the 8% inky rice cake was correlated with the inky rice cakes with the other adding ratios in all aspects of test. Futhermore, in the results of rheometer test. the hardness was correlated with the other three kinds of characteristics.

• 수산해양교육연구
• /
• 제21권3호
• /
• pp.409-419
• /
• 2009

The purpose of this study was the examination of delinquency according to, narcissism, self-esteem, hostility and alienation of juvenile. For this, setting 172 students of an academic high school and 366 students of a vocational school(total 538) as the object of this study, the measures of Narcissistic Personality Scales, Self-Esteem Scales, Alienation Scales, and Delinquency Scales were inquired. The method of statistical analysis about these materials was composed of Two-way Analysis of Variance, One-way Analysis of Variance, and Multi-regression Analysis by using SPSS 10.0. The result, when delinquency was examined according to narcissism and self-esteem, in the case that narcissism was highest, self-esteem was lowest, delinquency was highest. When delinquency was examined according to narcissism and hostility, in the case that narcissism was highest, hostility was highest, delinquency was highest. When delinquency was examined according to narcissism and alienation, in the case that narcissism was highest, alienation was highest, delinquency was highest. And, when Multi-regression Analysis about the effect of narcissism, self-esteem, hostility and alienation on delinquency was administrated, the variation that affected delinquency significantly was narcissism, hostility and alienation. That is, we could look forward that the more narcissists feel hostility and alienation, the higher they have delinquency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.749-751
• /
• 1998

In this study, the wind-mill type ultrasonic motor was fabricated, and then revolution and temperature characteristics of the ultrasonic motor were measured. Brass metal was pressed with umbrella-type using metal mold, then slot of 4 kind was processed in each of thickness. Among sixteen's ultrasonic motors, heat loss on applied voltage was much at stator of the highest resonant point, but heat loss on applied voltage was almost neglected at the lowest resonant point of stator. The thickener thickness of elastic body, revolution speed was decreased. The more slot of elastic body, revolution speed was increased. Applied voltage was changed from $10V_{max}$ to $100V_{max}$. When applied voltage was under $20V_{max}$, ultrasonic motor was not rotated. When applied voltage was over $90V_{max}$, revolution of ultrasonic motor was saturated. Maximum revolution speed was 510[rpm].