• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.105-113
• /
• 1995

For the case of using analog FM system and CDMA system together in the mobile communications, we experimentally calculate the appropriate frequency offset to improve the frequency efficiency by analizing the interference between both systems. As the results of the analysis, we obtained that frequency offset is 840KHz(Path Loss : 80dB) and 720KHz(Path Loss : 120dB) for the Path Loss when a output of CDMA Base Station is 0.91 W ERP. Therefore, to minimize the frequency offset, a output of Base Station will be controlled corresponding to Cover Area.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.10
• /
• pp.9-17
• /
• 2000

In this paper, the improved initial cell searching algorithm is proposed for 3GPP(The third Generation Partnership Project) W-CDMA system. The key objective of the proposed algorithm is to reduce searching slot and to increase the reliability in the first stage of cell searching algorithm in order to accomplish the second stage. So the proposed algorithm makes the mobile station transfers to the second stage from the first stage, just after the slot synchronization is declared successively at the same time-offset. In order to compare the proposed algorithm with the conventional one, the simulations are accomplished for cell search algorithm for 3GPP W-CDMA systems in the multipath Rayleigh fading channel. The first stage of conventional algorithm is also analyzed in a Rayleigh fading channel in order to prove simulation to be reasonable. In this paper, the proposed algorithm presents the better performance than conventional one. We also propose some parameters for optimal performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.37-52
• /
• 2004

In this paper, Multistage Adaptive Partial PIC eliminating effectively the multiple access and multipath interference for DS-CDMA based W-CDMA uplink system is designed and its performance is evaluated with computer simulation. By adaptively controlling the slope of the soft limiter with received signals, the efficiency of the soft limiter can be maximized and the better performance is obtained by solving error floor problem using further precise generation of interference signal. As a result, The proposed Multistage Adaptive Partial PIC with simple optimizing method for time-variant channel showed optimum performance at fewer stages. Besides fewer stages, the interference cancellation at the output of the rake receiver considerably reduced system complexity. The Multistage Adaptive Partial PIC with precise generation and efficient cancellation of interference signal can solve error eoor problem, resulted from initial false detection and improve system performance of high data rate system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1127-1135
• /
• 2000

The beamforming procedure in Adaptive Array Antenna System is affected by signal degradation and data rate due to DS-CDMA characteristics. Until this time, a lot of techniques are suggested to overcome this problems. This paper shows the simulation result about the beamforming performance of symbol level system that process slow data rate, compensated signal by despreading procedure in front of beamformer, and that of chip level system that process chip level signal without it. we analysis the performance using MSE, beam pattern, scattering points of beamformer output. chip level system is superior to symbol level system in time varying channel, while the performance of them didn't have difference in static channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.68-75
• /
• 2012

The load-insensitivity of the balanced power amplifier(PA) for W-CDMA handset applications is analyzed. The load impedances of the two parallel amplifiers in the balanced PA depending on the output load mismatch are mathematically calculated and with the result, the phase of reflection coefficient at which the linear output power is severely degraded is investigated. From the analysis, we proposed that the linearity of the balanced PA at the phase can be improved by properly increasing the transistor size and thus, multiple balanced PA's with different transistor size are designed and simulated. The simulation result showed that the balanced PA with larger transistor size has improved linear output power under VSWR=4:1.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.302-309
• /
• 2004

The transmission capacity of wireless communication systems may become dramatically high by employ multiple transmit and receive antennas with space-time coding techniques appropriate to multiple transmit antennas. For large number of transmit antennas and at high bandwidth efficiencies, the receiver may become too complex whenever correlation across transmit antennas is introduced. Reducing decoding complexity at receiver by combining array processing and space-time codes (STC) helps a communication system using STC to overcome the big obstacle that prevents it from achieving a desired high transmission rate. Multi-carrier CDMA (MC-CDMA) allows providing good performance in a channel with high inter-symbol interference. Antenna array, STC and MC-CDMA system have a similar characteristic that transmit-receive data streams are divided into sub-streams. Thus, there may be a noticeable reduction of receiver complexity when we combine them together. In this paper, the combination of array processing and STC in MC-CDMA system over slow selective-fading channel is investigated and compared with corresponding existing MC-CDMA system using STC. A refinement of this basic structure leads to a system design principle in which we have to make a trade off between transmission rate, decoding complexity, and length of spreading code to reach a given desired design goal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.642-647
• /
• 2007

HAP(High Altitude Platform) systems have been proposed due to their unique advantages over terrestrial and satellite systems as the alternative wireless communication system to deliver the third generation IMT-2000 wireless services. It has been required to study for the power control in W-CDMA HAP system as well as the terrestrial mobile system in order to mitigate interference and increase the capacity. In this paper, a new power control has been proposed for HAP system considering the interference profile into the DB(distributed balancing) SIR(signal to interference ratio)-based algorithm which has been considered in terrestrial system, and estimated by the outage performance of the proposed DB algorithm is better remarkably than DBPA(distance-based power allocation) which is proposed for HAP system, and it is the same regardless of the antenna maximum gain and its sidelobe characteristics.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.975-981
• /
• 2012

In this paper, we considered the received signal of the wideband CDMA systems using turbo code in the multipath channel environments, and analyze the performance of the system. This study is to analyze the performance for the variable system bandwidth according to the number of branches of rake receiver by passing the received signal through a rake receiver with a turbo code in Rayleigh fading channel environments. For the design of receiver in wideband CDMA systems, we presented the efficient parameters for the number of iterative decoding and the number of branches of rake receiver.

• 전자공학회논문지 IE
• /
• v.45 no.3
• /
• pp.42-49
• /
• 2008

This paper proposes a new beamforming algorithm to select beamforming gain or/and diversity gain in CDMA2000, W-CDMA, W-LAN channel according to signal environment on the multipath. In this paper, we present the criteria to obtain deversity gain at any point that based on quantized experimental value. Proposed method proposes represents a performance better than conventional algorithm adopting the largest two eigenvector when angle spread is exit. From the results of performance analysis through various simulation, it is confirmed that proposed method is far superior about $3{\sim}4$ times compare to conventional method in signal environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.425-432
• /
• 2003

In this paper, we designed a multi-carrier digital transmitter for CDMA base-station using a direct conversion scheme and verified the performance through circuit simulations. We examined a new technology required to design a multi-carrier transmitter, then designed and simulated a multi-carrier digital transmitter. ADS (Advanced Design System), RF simulation S/W of Agilent Technologies, was used for designing and simulating the multi-carrier digital transmitter. First, we simulated a digital block and an analog block separately, then performed a co-simulation for entire system. From the results, the final analog outputs of the designed multi-carrier digital transmitter met the spectrum mask characteristics of IS-97 & 3G TS 25.104 standard requirements. It means that proposed scheme could be applied to implement a multi-carrier digital transmitter for CDMA base-station. Therefore, proposed multi-carrier digital transmitter using a direct conversion scheme can accomplish cost-reduction and improvements of technology in the next CDMA base-station.