• YAKHAK HOEJI
• /
• v.39 no.5
• /
• pp.495-505
• /
• 1995

The O/W microemulsion systems were made from 2 or 4% (w/w) oil (soybean oil, olive oil or isopropyl myristate) and 10, 15 or 20% (w/w) Brij 96. They were compared with micellar solution of equivalent surfactant concentration m therms of physicochemical properties, and the solubilization of sudan IV. They were characterized by dynamic light scattering, stability, surface tension, viscosity and rheogram. The mean diameters of O/W microemulsion systems were 10-15nm, and those of Brij 96 micellar solutions were 18-19 nm. Both of them were monodisperse systems. The O/W microemulsion systems showed Newtonian flow and their apparent viscosities were lower than those of micellar solutions. The surface tensions of O/W microemulsion systems were increased or decreased depending on the types of oil used, when compared with those of micellar solutions. The O/W microemulsion systems were very stable, and did not show any flocculation or aggregation. Their mean diameters were not changed after three months. But oxidation was observed in microemulsions without nitrogen gas at high temperature. There was a significant improvement in the sudan IV solubffimtion in micromulsion compared with that m the micellar solution containing equivalent concentration of surfactant. The size distribution and mean diameters of O/W micromulsions were not changed when sudan IV was solubilized.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.3
• /
• pp.141-149
• /
• 1998

In order to reduce systemic side effects following administration, flurbiprofen was formulated as O/W microemulsion consisting of the surfactant, oil phase and aqueous phase. Particle size distribution, apparent viscosity, solubility and skin permeation of flurbiprofen in various vehicles and microemulsion were evaluated. The domain of O/W microemulsion s phase diagram had difference between oil types and the area of O/W microemulsion was wide distributed by adding to PG and cosurfactant than that of water alone. As increasing 10, 15 and 20% of Brij 97 content and 1, 2.5, 5% of oil content, the solubility of flurbiprofen in O/W microemulsions and various vehicles was $400{\sim}1,000$ and $10{\sim}500$ times higher than that of control. Also, apparent viscosity of soybean oil microemulsions was higher than that of IPM microemulsions and that of vehicle were increased as increasing vehicle content. Since skin permeation of flurbiprofen decreased as increasing viscosity, in each vehicle, it was not affected 2% ${\beta}-CD$ and decreased as increasing PG content and to 2, 5 and 10% of $HP-{\beta}-CD$. In O/W microemulsion, 5% soybean oil. 20% Brij 97 and 75% water(A-1) with high viscosity showed low skin penetration.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.20 no.1
• /
• pp.52-63
• /
• 1994

It was investigated that the effects of surfactant to cosurfactant ratio on the stability and rheological properties of o/w microemulsion. The stability of microemulsion was good in the surfactant to cosurfactant ratio 20/40 - 30/30. In the point of rheological properties, a yield stress meande the inner structure formation was detected and the area of hysteresis loop was increased with increasing of surfactant content of the ratio. The microemulsion prepared by the Microfluidizer was characterized by rheopetic.

• Archives of Pharmacal Research
• /
• v.28 no.12
• /
• pp.1400-1404
• /
• 2005

The aim of the present study was to develop the aqueous parenteral formulation containing propofol using o/w microemulsion systems. Propofol itself was chosen as the oil phase and its content was fixed to 1$\%$, w/w. Pseudoternary phase diagrams were constructed to obtain the concentration range of surfactant and cosurfacatnt and the optimum ratio between them for microemulsion formation. Consequently, the suitability of the chosen microemulsion system as a parenteral formulation was evaluated from the stability and hemolysis tests on that. Among the surfactants and cosurfactants screened, the mixture of Solutol HS 15-ethyl alcohol (5/1) showed the largest o/w mocroemulsion region in the phase diagram. When 1 $\%$ (w/w) of propofol was solubilized with 8$\%$ (w/w) of Solutol $HS^{circledR}$??? 15-ethyl alcohol (5/1), the average droplet size (150 nm) and the content of propofol in the systems were not significantly changed at 40$^{circ}C$ for 8 weeks. The hemolysis test showed that this formulation was nontoxic to red blood cells. In conclusion, propofol was successfully solubilized with the o/w microemulsion systems.

• Journal of Industrial Technology
• /
• v.43 no.1
• /
• pp.1-6
• /
• 2023

TiO₂ is a versatile metal oxide material that is frequently used as a photo-catalyst for organic pollutant oxidation and a functional material for ultraviolet-ray protection. To improve its chemical/physical properties and widen the range of industrial application, it is demanded to control the crystalline feature and morphology precisely by applying advanced nano-synthesis methods. In this study, we prepared TiO₂ nanoparticles using the water-in-oil (W/O) microemulsion method and compared them with the particles synthesized by the conventional precipitation method. Also, we tried to find the optimum conditions for obtaining nano-sized, anatase-rich TiO₂ particles by the W/O microemulsion method. We analyzed the crystalline feature and particle size of the prepared samples using X-ray diffraction (XRD) and Transmission electron microscopy (TEM). In summary, we found the W/O microemulsion is more effective than precipitation in obtaining nano-sized TiO₂. The best result was derived when the microemulsion was formed using AOT surfactant, hydrolysis was performed under basic condition and the sample was calcined at 200℃.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1021-1026
• /
• 2000

The removal of cadmium, copper and chromium ions was carried in a phase transfer reactor using W/O(water in oil) microemulsion containing sodium di[2-ethylhexyl] sulfosuccinate(AOT) and isooctane system. Removal efficiencies and mass transfer rate of $Cd^{2+}$, $Cu^{2+}$ and $Cr^{3+}$ were increasing with increasing pH of aqueous solution. However, $Cr^{6+}$ was not extracted by W/O microemulsion with AOT/isooctane system. It was found that removal of heavy metal ions were required an attractive electrostatic interaction between the metal ions and W/O microemulsion. The relationship between mass transfer rate. Jo of $Cd^{2+}$, $Cu^{2+}$ and $Cr^{3+}$ and pH of aqueous solution by W/O microemulsion suggested.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.3
• /
• pp.171-176
• /
• 2008

Talniflumate is a nonsteroidal anti-inflammatory drug (NSAID), which has been used treat of rheumatoid diseases, is insoluble in water, therefore it has low bioavailability after oral administration. The purposes of this study were to prepare O/W or W/O microemulsions for solubilization of poorly water soluble drug, talniflumate and to formulate into other dosage form. For this purpose, we made O/W or W/O microemulsion with oil(soybean oil, IPM), surfactant (Cremophor $EL^{(R)}$, Tween 80) and water or propylene glycol and evaluated solubility of talniflumate. The microemulsion systems were very stable and showed transmittance above 95% without flocculation or aggregation. Especially, the solubility of talniflumate in the formulation B-1 containing 18% of isopropyl myristate and 71% of tween 80 was 10 times higher than that of other O/W microemulsions. The addition of propylene glycol and N-methylglutamine to the fomulation B-1 showed excellent capacity on the solubilization of talniflumate and the percentage was almost 2.0%. These results suggest that the microemulsion system may be promising for the solubility improvement of talniflumate.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.364-371
• /
• 2007

Effects of continuous oil phase on silver halide nanoparticles were investigated where nanoparticles were prepared using two different types of water-in-oil(W/O) microemulsions containing silver and halide, respectively. Phase behavior experiments for ternary systems containing AOT surfactant, hydrocarbon oil and aqueous solution of an inorganic salt showed that the region of one phase W/O microemulsion was found to be broadened with an increase in the alkyl chain length of a hydrocarbon mainly due to an increase in hydrophilic nature of a surfactant. With the information of phase behavior experiments, silver halide nanoparticles were prepared using different AOT-based microemulsion systems and photomicrographs obtained by transmission electron microscopy indicated that about 10 nm size particles of relatively spherical shape were obtained. It has been found that an increase in alkyl chain length of a hydrocarbon results in a decrease in particle size because of higher intermicellar exchange rate among microemulsion drops. The average particle size was also found to increase with the inorganic salt composition of initial aqueous solution.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.330-339
• /
• 2008

Effect of additives such as NP series nonionic surfactant and cosurfactant on AgCl nanoparticles was investigated where nanoparticles were prepared using two different types of water-in-oil (W/O) microemulsions containing silver nitrate and sodium chloride, respectively. Phase behavior experiments showed that the region of one phase W/O microemulsion was found to be broadened with an increase in the ethylene oxide length of a nonionic surfactant mainly due to an increase in hydrophilic nature of a surfactant. Photomicrographs obtained by transmission electron microscopy indicated that an increase in ethylene oxide length of a nonionic surfactant results in both increases in particle size and size distribution. Phase behavior experiments for the systems containing AOT surfactant, isooctane and aqueous solution of an inorganic salt showed that addition of a cosurfactant caused a shrinkage in phase region of one phase W/O microemulsion, especially water contents contained in W/O microemulsion with an increase in the chain length or the concentration of a cosurfactant used. Photomicrographs obtained by transmission electron microscopy indicated that characteristics of AgCl nanoparticles produced were dependent both on the radius of spontaneous curvature and film rigidity of a microemulsion.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.3
• /
• pp.167-173
• /
• 2002

The isoflavone as a derivatives of flavone is colorless crystalline compounds. It acts on synthesis of fibronectine, collagen III, collagen I in human normal fibroblast by same biological activity to animal hormone. In this study, we tried to search and demonstrate system content rate of dermal translocation system for cosmetics using microemulsion containing isoflavone. The results of microemulsion stability test by centrifugation, storage in incubator and circulation chamber showed that separation of phase did not appear after 30 days. By the skin flexibility test, it has confirmed efficiency and effect as cosmetics materials. As the result, the microemulsion showed that skin flexibility factor improved up to 7.6%. We could confirm that O/W type microemulsion was stable system.