• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.138-143
• /
• 2000

In this paper, we carried out experiment to use crushed waste glass as a fine aggregate. This study delt with the comparative analysis on the construction works and engineering properties of concrete containing crushed waste glass through physical experiment. The experimental variables are crushed waste glass substitution ratio and W/C(38, 53%). When the W/C was 38%, we could know that concrete containing crushed waste glass was good as general concrete on the construction works and engineering properties but the concrete containing crushed waste glass applied W/C 53% was not good as general concrete on those. Therefore, concrete containing crushed waste glass applied W/C 53% should use admixture on the site.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2018

The effects of the fiber direction, specimen size and temperature on the compressive strength of carbon fiber reinforced silicon carbide composite (C/SiC composite) manufactured by liquid silicon infiltration(LSI) is investigated. Tests were conducted in accordance with ASTM C 695 at room temperature and elevated temperatures. Experiments are conducted with two different specimens considering grain direction. With grain (W/G) specimens have a carbon fibers parallel to the load direction, but across grain (A/G) specimens have a perpendicular carbon fibers. To verify the specimen size effect of C/SiC composite, two types of specimens are manufactured. One has a one to two ratio of diameter to height and the other has a one to one ratio. The compressive strength of C/SiC composite increased as temperature rise. As specimens are larger, compressive strength of A/G specimens increased, however compressive strength of W/G decreased.

• The Korean Journal of Food And Nutrition
• /
• v.7 no.2
• /
• pp.95-99
• /
• 1994

In order to investigate the fatty acid composition of Korean pumpkins, this study was designed. Three samples of Korean pumpkins, A(yellowish ripe), B(unripe, 30 days old) and C(unripe, 20 days old) were used for fatty acid analysis by gas chromatography. The results were as follows : Pumkin C, B and A showed 10, 12 and 15 kinds of fatty acids, respectively. In case of palmitic acid(C16:0), pumpkin C, B and A showed 22.5%, 22.9% and 26.6%, respectively. In case of u linolenic acid(C18:3), pumpkin C, B and A showed 22.6%, 23.6% and 44.8%, respectively. In case of palmitoleic acid(Cl6:1), pumpkin C. B and A showed 12.4%, 10.1% and 0.5%, respectively. In case of oleic acid(C18:1), pumpkin C. B and A showed 9.2%, 7.7% and 2.8%, respectively, In case of stearic acid(C18:0), pumpkin C, B and A showed B.S%, 3.7% and 3.5%, respectively. The ratio of P/S was 1.4, 1.6 and 1.9 for sample C, B and A, respectively. The ratio of w-3/w-6 was 1.1, 0.9 and 2.6 for sample C, B and A, respectively. Through this study, the ripe pumpkin(sample A) was thought to be good enough in nutritional aspects of fatty acids, particularly a-linoleic acid, Cl8 : 3(u-3) series.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.189-194
• /
• 1983

Raw and extruded barleys prepared by three different conditions were powdered and stored for four months at ambient $(25^{\circ}C)$ and accelerated temperatures $(40^{\circ}C)$ with $A_w$ of 0.31 and 0.71, respectively. The stability of the these samples with respect to lipid oxidation was studied. The lipid oxidation of all samples, as measured by the lipid diene conjugation of the extracted oil, increased with increased $A_w$ and temperature and with the storage time elapsed. The ratio of unsaturated to saturated fatty acids (U/S ratio) tended to decreased as the $A_w$ and temperature were increased. The raw sample had a greater increase in lipid conjugation diene but a decrease in U/S ratio than the extruded samples. The extruded sample containing the added sucrose had greater lipid stability than the other extruded samples. Lipid free-amino group content in all samples decreased with increased $A_w$ and temperature.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.3
• /
• pp.31-39
• /
• 2004

The bored pile is widely used as a low noise and vibration piling method in Korea. However, there is design tendency to minimize the friction capacity of the bored pile because of uncertainty and the quality control specification is not set up. This research analysed the strength characteristics of cement paste after the uniaxial compression test with various condition. Test results show that the compressive strength of cement paste with w/c=0.83 was up to $156.0kgf/cm^2$, and the lower w/c ratio and the longer age, the strength of cement paste increased. Also the higher soil mixing ratio, the strength of soil cement decreased, and too high soil mixing ratio caused the malfuction of soil cement. Also this research analysed the 188 dynamic pile test results which were performed before and after hardening of cement paste. Analysis result showed that the average ultimate unit friction capacity was $9.1tf/m^2$ and this result surpassed the common design criteria of the bored pile.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.143-151
• /
• 2022

In this study the relative dynamic modulus and surface rebound hardness measurement methods were used for comparison to predict the occurrence of frost dam age on the concrete. From the test results, it was observed that the initiation of concrete dam age predicted by surface rebound hardness values was 200 cycles quicker than that of the relative dynamic modulus method in the W/C 70 specimens. In addition, it continuously provided data that showed the frost damage development of concrete surfaces according to increasing freeze-thaw cycles. This indicated that the frost dam age of the concrete could be found from the initial point of its occurrence by the surface rebound hardness measurement method. Similar results were also observed in W/C 60 and 50 specimens. Therefore, it is considered that surface rebound hardness method predicted the freeze-thaw damage well, regardless of water-cement ratio.

• Korean Journal of Materials Research
• /
• v.12 no.1
• /
• pp.16-20
• /
• 2002

In this study, the 95W heavy alloys of 3/7, 5/5 and 7/3 of Ni/Fe ratio were sintered at the temperature range between 1420 and $1480^{\circ}C$ for 1h and their microstructures were discussed for an effect of the ${\mu}$-phase $(Fe_7W_6)$ on the microstructure. The ${\mu}$-phase was observed in the only 95W-1.5Ni-3.5Fe alloy of 3/7 and it is thought to be formed and grown from the surface of the W particle. The W particle was surrounded with the ${\mu}$-phase and there were only the W particles and this phase without Ni-Fe-W matrix at the most part. The ${\mu}$-phase changed the interphase structure in the alloy and the grain growth of the W was suppressed because of interrupting the solution-reprecipitation of the W. The W content in the matrix was considered to be lowered due to the interruption of the solution-reprecipitation and the formation of the ${\mu}$-phase in the .

• Applied Biological Chemistry
• /
• v.45 no.1
• /
• pp.30-36
• /
• 2002

A bioconcentration experiment was performed for killifish using nonradioactive and radioactive butachlor. At 0.036 ppm concentration, the highest bioconcentration ratio $(C_f/C_w)$ and BCF at steady state recorded as 296 and 87 respectively. And at 0.0036 ppm concentration, the highest $C_f/C_w$ ratio was 169 and the BCF was 51 at steady state. Considering the experimental variation of the BCF's, the BCF of butachlor was tentatively determined to be $69{\pm}28$. And the $^{14}C-butachlor$ and its metabolites depurated about 50% within 12 hours and 90% within 30 hours after depuration experiment started. And in vivo metabolites, designated as M-I, M-II, and M-III, were found in killifish and the excretes as butachlor was metabolised.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.118-121
• /
• 2006

The research reported here is concerned with the effects of the fiber combination condition and water/cement ratio on the mechanical properties of high performance fiber-reinforced cementitious composites(HPFRCC). An experimental investigation of the behavior of steel cords(SC) and SC and Polyethylene(PE) hybrid fiber reinforced cementitious material under compressive and tensile loading is presented. In this experimental research, the tensile and compressive strength and strain capacity of HPFRCC were selected using the cylindrical specimens. The results show that W/C ratio is a significant effect factor on the compressive and tensile performance of HPFRCC. The envelope curve concept applies to hybrid fiber-reinforced cementitious composites in tension just as it does to compressive stress-strain curve of fiber-reinforced cement composites. For practical purposes, the tensile envelope curve may be taken to be the same as the monotonic tensile stress-strain curve.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.14-21
• /
• 2022

Uniform scions and rootstocks should be produced to ensure grafting success. Light quality is an important environmental factor that regulates seedling growth. The effects of warm- and cool-white light emitting diode (LED) ratios on seedling growth were investigated. Scions and rootstocks of cucumber, tomato, and watermelon were grown in a closed transplant production system using LED as the sole lighting source. The LED treatments were W1C0 (only warm-white), W1C1 (warm-white: cool-white = 1:1), W3C1 (warm-white: cool-white = 3:1), and W5C2 (warm-white: cool-white = 5:2). The seedlings grown in W1C1 had the shortest hypocotyls, and the seedlings grown in W1C0 had the longest hypocotyls among the three tested vegetables. The hypocotyls of watermelon scions, watermelon rootstocks, and tomato rootstocks were shortest in W1C1, followed by those in W3C1, W5C2, and W1C0, but there was no significant difference between W3C1 and W5C2, which remained the same as the ratio of cool-white LEDs increased. In addition, tomato scions had the first and second longest hypocotyls in W1C0 and W3C1, respectively, and the shortest hypocotyls in W5C2 and W1C1, along with W5C2 and W1C1, although the difference was not significant. The stem diameter was highest in W1C0 except for tomato seedlings and rootstocks of watermelon. The shoot fresh weight of scions and rootstocks of cucumber and watermelon and the root fresh weight of cucumber scions were lowest in W1C1. These results indicated that different ratios of LED lighting sources had a strong effect on the hypocotyl elongation of seedlings.