• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3003-3008
• /
• 2007

Critical nozzle has been frequently employed to measure the flow rate of various gases, but hydrogen gas, especially being at high-pressure condition, was not nearly dealt with the critical nozzle due to treatment danger. According to a few experimental data obtained recently, it was reported that the discharge coefficient of hydrogen gas through the critical nozzle exceeds unity in a specific range of Reynolds number. No detailed explanation on such an unreasonable value was made, but it was vaguely inferred as real gas effects. For the purpose of practical use of high-pressure hydrogen gas, systematic research is required to clarify the critical nozzle flow of high-pressure hydrogen gas. In the present study, a computational fluid dynamics(CFD) method has been applied to predict the critical nozzle flow of high-pressure hydrogen gas. Redlich-Kwong equation of state that take account for the forces and volume of molecules of hydrogen gas were incorporated into the axisymmetric, compressible Navier-Stokes equations. A fully implicit finite volume scheme was used to numerically solve the governing equations. The computational results were validated with some experimental data available. The results show that the coefficient of discharge coefficient is mainly influenced by the compressibility factor and the specific heat ratio, which appear more remarkable as the inlet total pressure of hydrogen gas increases.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.168-176
• /
• 2007

The mixture sound speed in bubbly fluids is highly dispersive due to differences of the density and compressibility between bubbles and fluids. The dispersion range in bubbly fluids expands to a higher frequency than the resonance frequency of an air bubble. A theoretical model was developed to compute the reduction of radiation noise that is generated by a force applied on an infinite flat plate using a bubble layer as a compliant baffle. For evaluating the effectiveness of a bubble layer in reducing the structure-borne noise of an infinite elastic plate, the noise reduction levels for various parameters such as the thickness of bubble layers, the volume fractions and the distribution types of bubbly fluids are calculated numerically. The noise reduction effect of an air bubble layer on an infinite flat plate is considerable level and similar to the tendency of dispersion of bubbly fluids. It is recommended that the thickness of a bubble layer should be increased with keeping an appropriate volume fraction of an air bubble for the most effective reduction of the radiation noise.

• 한국광물학회지
• /
• 제20권4호
• /
• pp.261-266
• /
• 2007

천연시료 FeOOH-괴타이트에 대한 압축성을 측정하기 위하여 방사광과 라지 발륨 기기를 이용하여 상온에서 압축실험을 시행하였다. 에너지분산 x-선 회절법을 적용하였고 압력은 NaCl을 이용하여 측정하였다. 버치-머내한 상태방정식을 이용하여 계산된 체적탄성률은 131.1(5.8) GPa이었고 이때 $K_0'$은 고정된 값 4를 이용하였다. 현재 측정된 간은 이전에 발표된 값($111{\sim}147.9GPa$)과 일치하지 않고 차이를 보이고 있다.

• 폴리머
• /
• 제25권1호
• /
• pp.122-132
• /
• 2001

본 연구에서는 온도의 상승에 의하여 팽창하는 열팽창 기능을 가지고 있으면서 부피의 감소에 의하여 발생하는 압력의 손실을 상쇄시킬 수 있는 고무 치공구를 열가소성 고분자의 필름 함침공정에 적용하였다. 일반적인 압축성형공정에서는 온도의 상승에 의하여 수지가 용융되고 이에 수지가 함침됨에 따라 압력이 감소하지만, 고무 치공구를 사용한 경우에는 수지의 함침을 보상한 고무 치공구가 팽창하여 감소된 압력을 보상하기 때문에 급격한 압력의 강하를 억제할 수 있었다. 이렇게 수지의 함침에 따른 고무 치공구의 부피 팽창 그리고 이에 따른 수지 함침속도의 변화를 고려하여 고무 치공구를 이용한 필름 함침공정 모델을 제안하였다. 또한 고무 치공구를 사용하지 않는 일반적인 압축공정에 있어서 수지의 함침에 따른 섬유층 탄성력의 변화를 실험적으로 측정하여 단계적인 압축공정에 있어서 수지의 함침속도를 예측할 수 있는 모델을 제안하였다.

• 한국지반공학회논문집
• /
• 제20권9호
• /
• pp.17-23
• /
• 2004

굴양식장에서 폐기물로 처리되는 굴패각을 지반재료로 이용하기 위해서 굴패각-모래 혼합토의 강도 및 변형 특성에 대해 조사하였다. 타설된 모래다짐말뚝 재료의 강도는 표준관입시험(SPT)에 의해 현장에서 타설된 모래다짐말뚝 강도를 확인하는 것으로 되어있다. 그러나 모래는 표준관입시험에서 얻어진 N값과 내부마찰각의 관계에 대해 상당히 밝혀져 있으나, 굴패각-모래 혼합토에 대해서는 N값과 내부마찰각의 관계가 연구되어 있지 않다. 본 연구논문에서는 단위체적중량이 다양한 굴패각-모래 혼합토를 대형 모형토조에서 표준관입시험 및 대형 직접전단시험을 수행하여 N값, 단위체적중량, 내부마찰각의 상호 상관성을 제시하였다. 이러한 연구결과는 현장에서 표준관입시험을 통한 굴패각-모래 혼합토의 강도 평가가 가능하게 했으며 구속압축시험을 통하여 체적압축계수를 산정하고 혼합토의 예상침하량을 계산할 수 있게 하였다.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.63-74
• /
• 2001

In this study, a cycle simulation program of a Unit-Injection(UI) system was developed to estimate the injection performance of newly designed injection system. A fundamental theory of the simulation program is based on the conservation law of mass. Loss of fuel mass in the system due to leakage, compressibility effect of the liquid fuel and friction loss in the control volume was considered in the algorithm f the program. For the evaluation of the simulation program developed, the experimental result which was offered by the Technical Research Center of Doowon Precision Industry Co. was incorporated. Two main parameters; the maximum pressure in the plunger chamber and total fuel mass(kg) injected into the engine cylinder per cycle, were measured and compared with the simulation results. It was found that the maximum error rate of the simulation result to the experimental output was less than 3% in the rated rotational speed (rpm) range of the plunger cam.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.192-197
• /
• 2003

Three-dimensional cavity flow is analyzed with the code by using unstructured grid. Incompressible Navier-Stokes equations are used as governing equations, and governing equations are discretized by Finite Volume Method. Artificial compressibility method, proposed by Chorin, and developed by Soh, is used for coupling a pressure and a velocity. Cell-centered scheme is adopted in the code, this has the effect of having denser grid than nodal scheme when the same grid is used. Weighted Averaging scheme is used for the value at a nodal point. Cavity flow is analyzed, and this computed results are compared with the results in the research report

• 한국식품영양학회지
• /
• 제16권4호
• /
• pp.321-327
• /
• 2003

The reaction rates of 4-ethyl pyridine with p-methyl benzylbromide have been measured by conductometry in acetonitrile, and the rate constants of these reactions are determined in accordance with various temperatures (20, 25, 30$^{\circ}C$) and pressures (1, 200, 500, 1000 bar). The rate constants increased with the higher pressure and temperature. The activation energies and activation parameter values of these reactions are calculated by determination of the rate constants the same. The activation volume, activation compressibility coefficient and the activation entropy are all negative. The result of kinetic studies for the pressure show that this reaction proceeds in typical bimolecular nucleophilic substitution reaction.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.379-392
• /
• 2002

Numerical flow computations around an aeroelastic 3D square cylinder immersed in the turbulent boundary layer are shown. Present computational code can be characterized by three numerical aspects which are 1) the method of artificial compressibility is adopted for the incompressible flow computations, 2) the domain decomposition technique is used to get better grid point distributions, and 3) to achieve the conservation law both in time and space when the flow is computed a with moving and transformed grid, the time derivatives of metrics are evaluated using the time-and-space volume. To provide time-dependant inflow boundary conditions satisfying prescribed time-averaged velocity profiles, a convenient way for generating inflow turbulence is proposed. The square cylinder is modeled as a 4-lumped-mass system and it vibrates with two-degree of freedom of heaving motion. Those blocks which surround the cylinder are deformed according to the cylinder's motion. Vigorous oscillations occur as the vortex shedding frequency approaches cylinder's natural frequencies.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.248-252
• /
• 2005

Compressibility and deformability of clays change greatly when the clays are subjected to disturbance. These tendencies have been studied. However, the effect of the disturbance on the permeability that consists of consolidation properties has not yet been studied. In this study, relationship between permeability and volume ratio under the different degree of disturbance are experimently obtained. The results indicate that the relations are less influenced if the disturbance is less depending on the kind of soils.