• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.495-505
• /
• 2023

The Musan mine, situated in Musan County, Hamgyong Province, North Korea, stands as a prominent open-pit iron mine on the Korean Peninsula. This study focuses on estimating the mining and dumping activities within the Musan mine area by analyzing digital elevation model (DEM) changes. To calculate the long-term volume changes in the Musan mine, we digitized and converted the 1:200,000-scale third topographic map of the Joseon published in 1918 and compared with interferometric synthetic aperture radar (InSAR) DEMs, including Shuttle Radar Topography Mission DEM (2000) and Copernicus DEM (2011-2015). The findings reveal that over a century, Musan mine yielded around 1.37 billion tons of iron ore, while approximately 1.06 billion tons of waste rock were dumped. This study is particularly significant as it utilizes a historical topographic map predating the full-scale development of Musan mine to estimate a century's mining production and waste rock deposition. It is expected that this research provides valuable insights for future investigation of surface change of North Korea where the acquisition of in situ data remains challenging.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.1
• /
• pp.40-46
• /
• 2024

Among the electrode manufacturing processes for lithium-ion batteries, the drying process is crucial for production speed and process cost. Particularly, as the loading level of the electrode increases to enhance the energy density of the battery, optimizing process conditions for electrode drying becomes more critical. In this study, we compared the drying time and electrochemical performance of the positive electrode prepared at different drying temperatures. LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) was used as the active material and manufactured under various drying temperature conditions ranging from 120 ℃ to 210 ℃ at loading levels of 2.5 and 4.5 mAh cm^-2. The physical and electrochemical properties of the electrodes were compared. As the loading level of the electrode increases, the drying time of the electrode also increases, but this time can be reduced by increasing the drying temperature. The drying temperature used in manufacturing the NCM622 positive electrode does not significantly affect the electrochemical performance but drying above 210 ℃ resulted in an increase in the volume resistivity of the electrode and a decrease in electrochemical performance. Accordingly, in the manufacture of high-loading electrodes, the drying temperature was increased to 190 ℃ to shorten the electrode manufacturing time without a loss of performance.

• Journal of the Korea Society for Simulation
• /
• v.33 no.2
• /
• pp.1-11
• /
• 2024

A cyber-physical system is a technology that connects the physical systems of a manufacturing environment with a cyber space to enable simulation. One of the major challenges in this technology is the seamless communication between these two environments. In complex manufacturing processes, it is crucial to adapt to various protocols of manufacturing equipment and ensure the transmission and reception of a large volume of data without delays or errors. In this study, we propose a method for constructing agent models for real-time simulation-capable cyberphysical systems. To achieve this, we design data collection units as independent agent models and effectively integrate them with existing simulation tools to develop the overall system architecture. To validate the proposed structure and ensure reliability, we conducted empirical testing by integrating various equipment from a real-world smart microfactory system to assess the data collection capabilities. The experiments involved testing data delay and data gaps related to data collection cycles. As a result, the proposed approach demonstrates flexibility by enabling the application of various internal data collection methods and accommodating different data formats and communication protocols for various equipment with relatively low communication delays. Consequently, it is expected that this approach will promote innovation in the manufacturing industry, enhance production line efficiency, and contribute to cost savings in maintenance.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.145-151
• /
• 2023

In order to extend shelf life for rockfish fillets by modified atmosphere packaging (MAP), different package atmospheres were compared in the product quality preservation. Firstly, CO₂ solubility was measured at 0, 5, 10, and 15℃ to be incorporated into the mathematical model to predict the volume and CO₂ concentration of the package at expected storage temperature. The CO₂ solubility given in Henry's constant decreased with temperature to be fitted with a linear equation. Then air packaging as control and four MAP conditions of 100 g fillets were prepared and stored for duration of 5 days at 10℃ to compare them in the quality preservation effect. Four MAP conditions employed were CO₂(60):O₂(30):N₂(10), CO₂(60):O₂(0):N₂(40), CO₂(30):O₂(30):N₂(40) andCO₂(30):O₂(0):N₂(70). MAP conditions with high CO₂ concentration inhibited total aerobic bacteria, and the conditions containing O₂ led to low TVB-N. MAP of CO₂(60):O₂(30):N₂(10) was found to be the best condition for rockfish fillet preservation considering total aerobic bacteria growth and nitrogenous volatiles production.

• Journal of the Economic Geographical Society of Korea
• /
• v.27 no.1
• /
• pp.1-17
• /
• 2024

The purpose of this study is to identify the role of each party in relation to the contract farming of cabbage which is taking place under the contract between the local trader of agricultural produce that supplies raw cabbage to company "D," a manufacturer of kimchi, and the cabbage farm where the cabbage is grown, and to describe the changes brought by the contract farming to the agriculture of the contract area. As a result of the study, it was discovered that, while the farming of cabbage in the contract area used to be led by farmers, it is now increasingly being controlled by the local traders of agricultural produce. First, as the key player in the decision-making related to the cabbage farming in the main cabbage producing areas, local traders of agricultural produce are replacing the role of farmers by supervising the entire production process and controlling the overall cabbage farming in the contract area. Second, in the main cabbage producing areas, local traders of agricultural produce are becoming a key farming entity by carrying out functions that are comparable to those of farmers and playing a major role in the second half of the agricultural work at the farms in the contract area. This can be considered as the result of the balance between the demands of the local traders of agricultural produce who need to secure contract volume and manage the quality of their produce and the demands of the farmers in key cabbage producing areas who are facing difficulties due to the increase in the number of elderly farmers and a shortage of manpower.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.321-326
• /
• 2014

The aim of this study was to investigate which hydroponic system is the optimum for growth and photosynthetic characteristics of Angelica gigas during experiment. Angelica gigas 'Manchu' were sowed and managed under a growth room chamber. The environmental conditions (temperature $22^{\circ}C/18^{\circ}C$ (day/night), relative humidity 50-70%, photosynthetic photon flux density (PPFD) $120{\pm}6{\mu}mol\;m^{-2}s^{-1}$) were maintained for 3 weeks. Forty eight seedlings with 4-5 leaves were transplanted in deep flow technique (DFT), substrate, and spray culture systems [culture bed: 800 (L) ${\times}$ 800 (W) ${\times}$ 400 mm(H)] under $150{\pm}5{\mu}mol\;m^{-2}s^{-1}$ PPFD provided with fluorescence lamps and cultivated for 11 weeks. At the end of the experiment, fresh and dry weights, leaf lenghth and width, SPAD, root fresh, and dry weights, and root volume of Anglica gigas were measured. Photosynthetic rate of Anglica gigas were measured with portable photosynthesis systems to investigate optimum PPFD, $CO_2$ concentration, and air temperature conditions. Fresh and dry weights of Anglica gigas grown in substrate were significantly greater than DFT-treated, but there were not significant with spray treatment. Leaf photosynthesis of Anglica gigas showed the tendency to sharply increase as PPFD was increased from 50 to $200{\mu}mol\;m^{-2}s^{-1}$. Though $CO_2$ saturation point was around $1000-1200{\mu}mol\;mol^{-1}$, increase in air temperature from 16 to $26^{\circ}C$ did not quite affect photosynthesis of Anglica gigas. In conclusion, Anglica gigas may be optimally cultivated with a spray culture system as air temperature, PPFD, and $CO_2$ concentration for environment are controlled at $20{\pm}3^{\circ}C$, $150{\mu}mol\;m^{-2}s^{-1}$, and around $1000{\mu}mol\;mol^{-1}$ for mass production.

• Korean Journal of Animal Reproduction
• /
• v.26 no.3
• /
• pp.253-261
• /
• 2002

This study was carried out to investigate the semen characteristic, motility and viability and sperm motion characteristic by CASA test for establishing the Jindo-dog's semen freezing system. The results obtained are as follow: 1. The semen was collected 63 times. Average volume of semen, concentration of sperm, total number of sperm, progressive motility and viability were 3.8 $m\ell$ 145.6$\times$10$^{6}$ cells/$m\ell$, 396.2 x10$^{8}$ cells, 79.7% and 89.5%, respectively. Also, Fawn (Yellow) Jindo-dog comparing with White Jindo-dog showed better concentration of sperm, total number of sperm, progressive motility and viability. Among all dogs, the results of No. 2 Fawn Jindo-dog were the best. 2. The average progressive motility and viability of semen from 46 times were 73.5%, 82.3% before freezing and 51.1%, 64.9% after freezing. So, the freezing of semen has affected the progressive motility and viability. The progressive motility and viability of Fawn Jindo-dog's semen, before and after freezing, were better than White Jindo-dog. And No. 2 Fawn Jindo-dog showed the best results and showed significantly different among all dogs (P<0.05). 3. The 44 times-tested .esults by CASA system were as follow; MOT (motility) 65.6%. PROG (progressive motility) 54.8%, VAP (average path velocity) 75.3 ${\mu}{\textrm}{m}$/sec, VCL (curve linear velocity) 90.0 ${\mu}{\textrm}{m}$/sec, VSL (straight-line velocity) 69.4 ${\mu}{\textrm}{m}$/sec and ALH (amplitude of lateral head displacement) 4.4 ${\mu}{\textrm}{m}$. Although the motion characteristic of frozen semen were not significantly different between White and Fawn Jindo-dog, No. 2 Fawn Jindo-dog showed the best results and was significantly different among all dogs (P<0.05). 4. The success rate of frozen semen production between White and Fawn Jindo-dog were 43% (13/28), 94% (33/35), respectively, and the total success rate was 73% (46/63). The freezing-ability of Fawn Jindo-dog's semen was better than the other. Conclusively, the present results indicated that the characteristic and motility of Jindo-dog') semen were suitable for processing frozen semen, artificial insemination and mass production system. Also, the selection of suitable dog-breed was so important because the characteristic and freezing-ability of semen were significantly different between White and Fawn Jindo-dogs and among all individual dogs.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.477-484
• /
• 2006

This study was performed to know the potentialities of the fruits of Opuntia ficus-indica, as a medium for mushroom mycelial culture. Five mushroom mycelial (Agrocus blazei, Grifola frondosa, Hericium erinaceum, Innonotus obliquus, Phellinus linteus) were frown on the malt extract broth (MEB) and the cactus broth medium (CB). The submerged culture mixtures were extracted using equal volume of ethyl acetate, and their extract yields, total polyphenol contents, and some physiological activities were compared with each other Each extract from mycelial culture grown on CB medium showed remarkable enhancement in physiological activities compared with each counterpart grown on MEB. Among five mycelial cultures grown on CB medium, the extract yield and polyphenyl content were highest in the extract from Grifola frondosa (extract yield, 0.4 g/L and polyphenol content, 22.7%). Also, the extracts from Grifola frondosa showed the highest physiological activities, such as DPPH radical scavenging ($IC_{50}=362.9{\mu}g/ml$), xanthine oxidase inhibition (about 80% at $500{\mu}g/ml$), and superoxide radical scavenging (about 80% at $500{\mu}g/ml$), and NO production inhibition ($IC_{50}=43.1{\mu}g/ml$) in LPS-stimulated RAW 264.7 cells. This result suggests that the fruit of Opuntia ficus-indica can be used as a culture medium for improving the functional properties of various mushroom mycelia.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.4
• /
• pp.339-344
• /
• 2000

Utilization of animal excreta in aquaculture can have potentials of high fish production and low maintenance costs for fish farming and it can reduce water pollution caused by animal waste disposal. Integration of wastewater treatment pond system with aquaculture has been utilized in many countries. Ecologically balanced pond ecosystem is formed through the stabilization of wastes, the growth of aquatic plants, and the cultivation of fish. The most appropriate fish for rearing in these ponds are those which can feed directly on phytoplankton, especially algae. Carp were introduced into a tertiary pond - water depth of 2.2 m, water surface area of $130\;m^2$, volume of $148\;m^3$ - of a pond system treating milk cow excreta. The carp production was $125g{\cdot}m^{-2}year^{-1}$ which falls into upper range of $18\;-\;137g{\cdot}m^{-2}year^{-1}$ of treated sewage-fed carp farming of other countries. Average $BOD_5$ and T-N of the pond was 19.8 and $21.0\;mg{\cdot}L^{-1}$ respectively, and the ecological environment of it was suitable for growth of carp. Several carp of 100g were introduced in August into a secondary pond of the treatment system, whose average $BOD_5$ and T-N was 27.9 and $30.8\;mg{\cdot}L^{-1}$ respectively. They were died within one week, which may be attributed to the depletion of dissolved oxygen at dawn. Effluents from primary treatment can be used in fish pond with dilution and those from secondary treatment can be directly funnelled into it. Waste stabilization pond treating animal excreta can be utilized for fish rearing when its water quality maintains secondary treatment level.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.104-110
• /
• 2015

It is known that polymer concretes are 8~10 times more expensive than ordinary Portland cement concretes; therefore, in the production of polymer concrete products, it is very important to reduce the amount of polymer binders used because this occupies the most of the production cost of polymer concretes. In order to develop a technology for the reduction of polymer binders, smooth and spherical aggregates were prepared by the atomizing technology using the oxidation process steel slag (electric arc furnace slag, EAFS) and the reduction process steel slag (ladle furnace slag, LFS) generated by steel industries. A reduction in the amount of polymer binders used was expected because of an improvement in the workability of polymer concretes as a result of the ball-bearing effect and maximum filling effect in case the polymer concrete was prepared using the smooth and spherical atomized steel slag instead of the calcium carbonate (filler) and river sand (fine aggregate) that were generally used in polymer concretes. To investigate physical properties of the polymer concrete, specimens of the polymer concrete were prepared with various proportions of polymer binder and replacement ratios of the atomized reduction process steel slag. The results showed that the compressive strengths of the specimens increased gradually along with the higher replacement ratios of the atomized steel slag, but the flexural strength showed a different maximum strength depending on the addition ratio of polymer binders. In the hot water resistance test, the compressive strength, flexural strength, bulk density, and average pore diameter decreased; but the total pore volume and porosity increased. It was found that the polymer concrete developed in this study was able to have a 19% reduction in the amount of polymer binders compared with that of the conventional product because of the remarkable improvement in the workability of polymer concretes using the spherical atomized oxidation steel slag and atomized reduction steel slag instead of the calcium carbonate and river sand.