• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.433-438
• /
• 2024

Piezoelectric ceramics play an important role in various electronic applications. However, traditional ceramics are difficult to be used in some complicated structures, due to their low flexibility and high brittleness. To solve this problem, this study prepared and investigated ceramic/polymer composites that can utilize a good flexibility of polymers. Polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) and 0.77(Bi_1/2Na_1/2)TiO₃-0.23SrTiO₃ (BNST23) ceramics were selected to fabricate the composites. Ceramic/polymer composites were prepared using various volume fractions of BNST23 ceramics. The distribution of piezoceramic particles in BNST23/PVDF-TrFE composites was investigated using optical microscopy (OM) and scanning electron microscopy (SEM). The dielectric and piezoelectric properties of the composites were significantly influenced by the volume fraction of the piezoelectric ceramics. As a result, the highest piezoelectric constant (d₃₃) of 56 pC/N was obtained in a composites with 70% volume fraction of BNST23 ceramics. Accordingly, it is expected that BNST23/PVDF-TrFE composites can be applied to various sensor applications.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.716-718
• /
• 2004

The false alarm data in intrusion detection systems are divided into false positive and false negative. The false positive makes bad effects on the performance of intrusion detection system. And the false negative makes bad effects on the efficiency of intrusion detection system. Recently, the most of works have been studied the data mining technique for analysis of alert data. However, the false alarm data not only increase data volume but also change patterns of alert data along the time line. Therefore, we need a tool that can analyze patterns that change characteristics when we look for new patterns. In this paper, we focus on the false positives and present a framework for analysis of false alarm pattern from the alert data. In this work, we also apply incremental data mining techniques to analyze patterns of false alarms among alert data that are incremental over the time. Finally, we achieved flexibility by using dynamic support threshold, because the volume of alert data as well as included false alarms increases irregular.

• Structural Engineering and Mechanics
• /
• v.41 no.4
• /
• pp.559-573
• /
• 2012

An adaptive modeling and simulation technique is introduced for the effective and reliable fluid-structure interaction analysis using MSC/Dytran for large-scale complex pressurized liquid containment. The proposed method is composed of a series of the global rigid sloshing analysis and the locally detailed fluid-structure analysis. The critical time at which the system exhibits the severe liquid sloshing response is sought through the former analysis, while the fluid-structure interaction in the local region of interest at the critical time is analyzed by the latter analysis. Differing from the global coarse model, the local fine model considers not only the complex geometry and flexibility of structure but the effect of internal pressure. The locally detailed FSI problem is solved in terms of multi-material volume fractions and the flow and pressure fields obtained by the global analysis at the critical time are specified as the initial conditions. An in-house program for mapping the global analysis results onto the fine-scale local FSI model is developed. The validity and effectiveness of the proposed method are verified through an illustrative numerical experiment.

• Wind and Structures
• /
• v.18 no.1
• /
• pp.57-67
• /
• 2014

For a building with a dominant windward wall opening, the wind-induced internal pressure response can be described by a second-order non-linear differential equation. However, there are two ill-defined parameters in the governing equation: the inertial coefficient $C_I$ and the loss coefficient $C_L$. Lack of knowledge of these two parameters restricts the practical use of the governing equation. This study was primarily focused on finding an accurate reference value for $C_I$, and the paper presents a systematic investigation of the factors influencing the inertial coefficient for a wind-tunnel model building including: opening configuration and location, wind speed and direction, approaching flow turbulence, the model material, and the installation method. A numerical model was used to simulate the volume deformation under internal pressure, and to predict the bulk modulus of an experimental model. In considering the structural flexibility, an alternative approach was proposed to ensure accurate internal volume distortions, so that similarity of internal pressure responses between model-scale and full-scale building was maintained. The research showed 0.8 to be a reasonable standard value for the inertial coefficient.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.75-85
• /
• 2006

Currently, cross-section design can not reflect highway function and traffic volume, various construction. This research paper provides analysis of traffic accident type, improvement of traffic operation and safety, assessment for new cross-section standards of two-lane highway. Research show higher accident rate on 6$\sim$8.9m road than 9$\sim$12.9m road width in two-lane highway. Typical improvement is widening on lane and shoulder width. Simulation show large increase on 6$\sim$7m road delay-time in 1,200vph. In contrast 10$\sim$11.5m road shows slight change on delay-time. This research paper provides various cross-section construction by traffic volume in minor arterial and distributor two-lane highway. The new cross-section design provides adopting highway volume, various construction and flexibility.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.221-224
• /
• 2007

MMS(Mobile Mapping System) generates a efficient image data for mapping and facility management. However, this image data of MMS has many difficulties in a practical use because of huge data volume. Therefore the important information likes road sign post must be extracted from huge MMS image data. In Korea, there is the HMS(Highway Management System) to manage a national road that acquire the line and condition of road from the MMS images. In the HMS each road sign information is manually inputted by the keyboard from moving MMS. This manually passive input way generate the error like inaccurate position, mistaking input in this research we developed the automatic road sign identifying technique using the image processing and the direct geo-referencing by GPS/INS data. This development brings not only good flexibility for field operations, also efficient data processing in HMS.

• Journal of Satellite, Information and Communications
• /
• v.4 no.2
• /
• pp.52-56
• /
• 2009

The design method of a four-port stripline circulator with a single ferrite disk is proposed using Green's function method. The four-port circulator gives the flexibility of the design of the communication system. Two cascaded three-port circulators has been used as a four-port circulator. However, if a four-port circulator with a single ferrite disk replace the present four-port circulator, then it will give less weight and volume and so has the advantage in satellite application.

• Structural Engineering and Mechanics
• /
• v.20 no.2
• /
• pp.143-160
• /
• 2005

Modal analysis of cracked cantilever composite beams, made of graphite-fibre reinforced polyamide, is studied. By using the finite element and component mode synthesis methods, a numeric model applicable to investigate the vibration of cracked composite beams is developed. In this new approach, from the crack section, the composite beam separated into two parts coupled by a flexibility matrix taking into account the interaction forces. These forces are derived from the fracture mechanics theory as the inverse of the compliance matrix calculated with the proper stress intensity factors and strain energy release rate expressions. Numerical results are obtained for modal analysis of composite beams with a transverse non-propagating open crack, addressing the effects of the location and depth of the crack, and the volume fraction and orientation of the fibre on the natural frequencies and mode shapes. By means of modal data, the position and dimension of the defect can be found. The results of the study confirmed that presented method is suitable for the vibration analysis of cracked cantilever composite beams. Present technique can be easily extended to composite plates and shells.

• Electronics and Telecommunications Trends
• /
• v.35 no.6
• /
• pp.78-87
• /
• 2020

With the evolution of the Internet of Things (IoT), a computing paradigm shift from cloud to edge computing is rapidly taking place to effectively manage the rapidly increasing volume of data generated by various IoT devices. Edge computing is computing that occurs at or near the physical location of a user or data source. Placing computing services closer to these locations allows users to benefit from faster and more reliable services, and enterprises can take advantage of the flexibility of hybrid cloud computing. This paper describes the concept and main benefits of edge computing and presents the trends and future prospects for edge computing technology.

• Journal of Oriental Neuropsychiatry
• /
• v.27 no.2
• /
• pp.89-101
• /
• 2016

Objectives In human, there is a diversity in the breathing pattern, for instance inspiratory and expiratory time, volume, breathing frequency, and breath-to-breath variation. Expecially, respiratory variability can provide important information about breathing regulation and physiological flexibility. it is significant to not only breathing index but also physiological index.Methods Thus this paper reviews the literature on respiratory variability with the aim of clinical application.Results We could find the interrelationships and respiratory variability between emotions, psychopathy, sighing, mental and physical activity.Conclusions As a result, respiratory variability can serve an important physiological index in the clinical area and reflects how our bodies act in diverse environments under various condition.