• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.31-32
• /
• 2007

Built-in voltage in organic light-emitting diodes was studied using modulated photocurrent technique ambient conditions. A device was made with a structure of anode/$Alq_3$/cathode to study a built-in voltage. An ITO was used as an anode, and $Li_2O$/Al was used as a cathode. From the bias voltage-dependent photocurrent, built-in voltage of the device is determined. The applied bias voltage when the magnitude of modulated photocurrent is zero corresponds to a built-in voltage. Built-in voltage in the device is generated due to a difference of work function of the anode and cathode. It was found that for 0.5nm thick $Li_2O$ layer built-in voltage is the higher than the others. It indicates that a very thin alkaline metal compound $Li_2O$ lowers an electron barrier height.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.51-52
• /
• 2007

Built-in voltage in organic light-emitting diodes was studied using modulated photocurrent technique ambient conditions. From the bias voltage-dependent photocurrent, built-in voltage of the device is determined. The applied bias voltage when the magnitude of modulated photo current is zero corresponds to a built-in voltage. Built-in voltage in the device is generated due to a difference of work function of the anode and cathode. A device was made with a structure of anode/$Alq_3$/cathode to study a built-in voltage. ITO and ITO/PEDOT:PSS were used as an anode, and Al and LiF/AI were used as a cathode. It was found that an incorporation of PEDOT:PSS layer between the ITO and $Alq_3$ increases a built-in voltage by about 0.4V. This is consistent to a difference of a highest occupied energy states of ITO and PEDOT:PSS. This implies that a use of PEDOT:PSS layer in anode improves the efficiency of the device because of a lowering of anode barrier height. With a use bilayer cathode system LiF/Al, it was found that the built-in voltage increases as the LiF layer thickness increases in the thickness range of 0~1nm. For 1nm thick LiF layer, there is a lowering of electron barrier by about 0.2eV with respect to an Al-only device. It indicates that a very thin alkaline metal compound LiF lowers an electron barrier height.

• 설비공학논문집
• /
• 제13권7호
• /
• pp.627-636
• /
• 2001

This paper presents a numerical analysis of the emission process of volatile organic compound(VOC) from building material and its diffusion in a room. A polypropylene styrene-butadiene rubber(SBR) floor plate is chosen as the emission source of VOC. This study investigates spatial concentration distributions and time history of room-averaged VOC concentration for both with and without flushing. The results of this study show that for calculation based on ten-days period the room averaged VOC concentrations with and without flushing are quite different. the results thus suggest the need of flushing for new buildings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.317-320
• /
• 1998

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays, where they are attractive because of their capability of multicolor emission, and low operation voltage. In this study, glass substrate/ITO/Eu(TTA)$_3$(Phen)/Al(A), glass substrate/ITO/TPD/Eu(TTA)$_3$(phen)/Al(B) aNd glass substrate/ITO/TPD/Eu(TTA)$_3$(Phen)/A1Q$_3$/Al (C) structures were fabricated by vacuum evaporation method, where aromatic diamine(TPD) was used as a hole transporting material, Eu(TTA)$_3$(phen) as an emitting material, and tris(8-hydroxyquinoline) Aluminum (AlQ$_3$) as an electron transporting layer. Etectroluminescent(EL) and I-V characteristics of Eu(TTA)$_3$(phen) with a various thickness were investigated. This structure shows the red EL spectrum, which is almost the same as the PL spectrum of Eu(TTA)$_3$(phen). I-V characteristics of this structure show that turn-on voltage was 9V and current density was 0.01A/㎤ at a dc operation voltage of 9V. Electrical transporting phenomena of these structures was explained using the trapped-charge-limited current model with I-V characteristics.

• 공업화학
• /
• 제24권4호
• /
• pp.433-437
• /
• 2013

다공질 세라믹 막을 사용하는 플라즈마-촉매 반응기에서 휘발성유기화합물의 분해가 수행되었다. 저압차 촉매 지지체로 사용된 세라믹 막에 광촉매인 산화아연을 담지하여 휘발성유기화합물의 산화 성능을 개선하고자 하였다. 교류 고전압에 의해 구동되는 플라즈마가 다공질 세라믹 막 내에서 전개되면서 휘발성유기화합물의 분해에 이용되는 라디칼, 오존, 이온, 여기상태 분자 등 다양한 활성성분을 생성하게 된다. 반응기에 공급되는 고전압이 증가함에 따라 플라즈마가 점차 방사방향으로 전개되어, 일정 전압을 넘어서면 세라믹지지체 전체적으로 균일한 플라즈마가 생성되었다. 휘발성유기화합물 분해 성능 평가에는 에틸렌이 이용되었다. 전기에너지밀도, 반응기 입구 에틸렌 농도, 촉매 담지 여부, 기체 조성에 따른 에틸렌 분해효율이 조사되었다. 같은 에너지 밀도에서 비교하면 산화아연이 담지된 촉매에서의 에틸렌 분해 효율이 담지되지 않은 경우보다 더 높은 것으로 나타났으며, 기체 조성 변화 실험을 통해 폐가스의 주요 구성성분인 산소와 질소 모두 에틸렌의 분해를 개시하는데 중요한 역할을 함을 알 수 있었다. 일반적인 기상반응과 달리, 플라즈마 반응기에서의 에틸렌 분해 반응은 활성 성분의 양에 의해 지배되므로, 방전 전력이 동일할 경우 에틸렌 농도가 높아질수록 분해효율이 저하되었다.

• 마이크로전자및패키징학회지
• /
• 제10권1호
• /
• pp.1-5
• /
• 2003

본 연구에서는 ITO (indium tin oxide)/glass 투명기판 위에 다층구조의 OELD (organic electroluminescent devices) 소자를 진공 열증착법으로 제작하였다. 발광층 재료로서 Alq$_3$(tris-(8-hydroxyquinoline)aluminum)물질을 사용하였고, 정공수송층으로는 TPD (triphenyl-diamine) 및 $\alpha-NPD$를 사용하였다. 정공주입층 재료로서 CuPc (Copper phthalocyanine)를 사용하였다. 또한 QD2(quinacridone2) 물질을 $Alq_3$ 발광층내에 약 $10\AA$ 두께로 증착하여 발광효율 향상을 시도하였다. 제작된 모든 소자의 발광개시전압은 약 7 V 이었으며, 정공수송층으로 TPD 물질대신에 열적안정성이 우수한 $\alpha-NPD$를 사용한 경우 휘도값과 발광효율이 개선되었다. $Alq_3$ 발광층 사이에 QD2 물질을 적층한 소자에서 발광효율은 1.55 lm/W 값을 나타내어 $Alq_3$ 발광층만을 사용한 경우에 비해 약 8배 발광효율이 향상되었다.

• 청정기술
• /
• 제14권3호
• /
• pp.218-223
• /
• 2008

마이크로 에멀젼 수용액에 분산된 반응성 유기화합물을 전기분해를 통하여 얻을 수 있는 수산화이온 및 수소이온을 이용하여 가수분해시키고, 분해속도를 비교하는 실험을 수행하였다. 반응물질로 사용된 p-nitrophenylacetate (PNPA)의 가수분해로부터 발생하는 p-nitrophenoxide 농도 변화에 따른 흡광도 변화를 이용하여 분해속도를 얻을 수 있었다. 자체 조립한 전기분해 장치를 이용하여 전압, 반응온도, 반응물질 양에 따른 분해속도 변화를 관찰하였다. 마이크로 에멀젼 사용으로 인하여 반응물질 용해도를 증가시킬 수 있으며, 전기분해법 사용으로 인하여 반응속도 조절이 용이하며, 유지비용이 저렴하고, 기존 화학물질 투여방법에 비해 소모되는 시약 보충 및 반응 후 부산물 처리 등의 과정이 수월하다. 유기물질 분해에 대한 메커니즘 및 수처리 분야 응용에 대하여 토의하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1890-1892
• /
• 2005

Recently, high luminance and high efficiency were realized in OLEDs with multilayer structure including emitting materials such as metal-chelate complexes. New luminescent materials, [2- (2-hydroxyphenyl)-quinoline] (Zn(HPB)q), [(1,10-phenanthroline)- (8-hydroxyquinoline)] Zn(Phen)q was synthesized. Zn-Complexes have low molecular compound and thermal stability. The ionization potential(IP) and electron affinity(EA) of Zn-complexes were measured by cyclic-voltammetry(CV). The fundamental structure of the OLEDs was $ITO/{\alpha}$-NPD/Zn-Complex/Al and then we made device structure rightly in energy band gap. We using Zn(Phen)q as emitting layer and Zn(HPB)q as electron transport layer. We measured current density-voltage, luminance-voltage characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.779-782
• /
• 2000

Silicone rubbers are first silicone polymers and has named silicone from existence of Si-O bond similar to Keton. Silicon in organic compound has been called silicone, and linear or network polymers. Silicone rubbers have been used as an power insulator because they are well weather proof, ozone proof and have excellent electric characteristics, thermal stability, cold resistance and low surface energy. Especially, it is known that they have very excellent characteristics at 200[$^{\circ}C$]. For this study, we made silicone rubbers as specimens and we measured dielectric loss tangent due to applied voltage at temperature range 25[$^{\circ}C$] to 180[$^{\circ}C$] and frequency range 20[Hz] to 1${\times}$10$\^$6/[Hz] to examine dielectric properties. We measured dielectric loss tangent to study the insulation performance of silicone rubbers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.167-168
• /
• 2008

Organic light emitting diodes (OLEDs) show a lot of advantages for display purposes. Because OLEDs provide white light emission with a high efficiency and stability, it is desirable to apply OLEDs as an illumination light source and back light in LCD displays. We synthesized new emissive materials, namely $Zn(HPB)_2$ and Zn(HPB)q, which have a low molecular compound and thermal stability. We studied white OLEDs using $Zn(HPB)_2$ and $Zn(PQ)_2$. The fundamental structures of the white OLEDs were ITO / NPB (40 nm) / $Zn(HPB)_2$ (40 nm) / $Zn(PQ)_2$ (20 nm) / LiAl (120 nm). As a result, we obtained a maximum luminance of $4200cd/m^2$ at a current density of $440mA/cm^2$. The CIE (Commission International de l'Eclairage) coordinates are (0.319, 0.338) at an applied voltage of 10 V.