• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.18-26
• /
• 2013

Shear-wave velocity ($v_s$) structures beneath two seismic stations, JJU and JJB on the flanks of the volcano Halla on Jeju island, Korea, were estimated by receiver-function inversion and H-${\kappa}$ stacking applied to 150 teleseismic events ($M_W{\geq}5.5$) recorded since 2007. $P_S$ waves converted at the Moho discontinuity does not appear clearly for northwesterly back-azimuths ($207{\sim}409^{\circ}$, average $308^{\circ}$) at station JJU and southeasterly back-azimuths ($119{\sim}207^{\circ}C$, average $163^{\circ}$) at station JJB. This may be due to a gradual velocity increase at Moho or heterogeneity within the crust. The $v_s$ models derived by inversion of receiver functions indicate a distinct low velocity layer ($v_s{\leq}3.5km/s$; LVL) within the crust and a gradual increase in $v_s$ in the depth interval of 30 to 40 km. Within the radius of 18 km beneath station JJB, the LVL occurs at depths of 14 ~ 26 km and the 'Moho' ($v_s{\geq}4.3km/s$) is at 34 km depth. Ten kilometers to the west, within the radius of 16 km beneath station JJU, both the LVL and the Moho are significantly shallower, at depths of 14 to 24 km and 30 km, respectively. H-${\kappa}$ analyses for stations JJU and JJB yield estimated crustal thickness of 29 and 33 km and $v_p/v_s$ ratios of 1.64 and 1.75, respectively. The lesser $v_p/v_s$ ratio was derived for rocks nearest to th peak of the volcano.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.4
• /
• pp.385-396
• /
• 2012

Jeju island is the biggest volcanic island in Korea and there are over 455 Quaternary monogenetic volcanoes, of which approximately 373 volcanoes(82.0%) are cinder cones. Other volcanic forms in the island include sharp-pointed lava cone without crater(9 volcanoes; 2.0%), shield volcanoes(27 volcanoes; 5.9%), tuff rings(17 volcanoes; 3.7%), tuff cones(3 volcanoes; 0.7%), a maar(1 volcano; 0.2%) and lava domes(25 volcanoes; 5.5%). The monogenetic volcanoes include 15 small nested cinder cones(aloreum). The monogenetic volcanoes are more abundant in the eastern part of the island than in the western part. If the main cause of the weathering such as precipitation affected the shape of the monogenetic volcanoes, more monogenetic volcanoes(BC, CC, DC, etc.) are supposed to be present in the southern part that have more precipitation than in the northern part. But the distribution of the monogenetic volcanoes shows no difference between the southern and the northern parts. So we suggest that the difference of the climatic conditions did not affect the distribution or the shape of cinder cones. Tuff rings, tuff cones and a maar are distributed beneath the island or in the low-altitude areas along the shore although cinder cones are distributed in the interior of the island. This means that the volcanic activity which formed the monogenetic volcanoes resulted from either phreatomagmatic eruption or magmatic (hawaiian or strombolian) eruptions depending on the reaction with water (underground water or shallow waters). The distribution of the monogenetic volcanoes according to the altitude shows that 253(55.6%) volcanoes occur in low-lying coastal areas at an altitude below 300 m, 110(24.2%) in a middle mountainous area at an altitude between 300~600 m and 92(20.2%) in a high mountainous area at an altitude above 600 m. So more than half of monogenetic volcanoes are distributed in low-lying coastal areas.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.101-109
• /
• 2012

Traditional village forests in Jeju Island represent unique cultural landscape with a history of more than several hundred years as a national cultural asset in Korea. In this paper, the characteristics and meaning of traditional village forests in Jeju Island was compared with the Dangsan and Bibo forests at inland. There are 368 Oreums, parasitic volcano, and 391 shrines of Dang(Divine place) in Jeju. Life, culture and tradition of rural villages are all connected with the Dang and Oreum in Jeju. It has been found from this study that the village in Jeju were established as a cultural landscape on the surface of natural landscape. The features of traditional villages focused on the Dang and Oreum in Jeju Island were similar to the Dangsan and Bibo forestsat inland villages. The Oreum represents mountain and the Pojedan forest is newly found in Sangmyung-ri. The seashore areas are covered by vaocanic rocks in Jeju and large scale windbreaks are hardly found. The stone tower at Sinheung-ri built for blocking sand movement represents Bibo forest. The special attribute of the Dang in Jeju is that it is close to real life and believers are still remain. In 2009, the Jeju Chilmeoridang Yeongdeunggut ritual was nominated as an Intangible Cultural Heritage of Humanity by UNESCO. The shrine of Dang, however, has been degraded fast by construction of seashore road and Jeju Olle trail path. As for the world cultural heritage discussed at international conferences, it is important that there is sustainability on the right to enjoy cultural heritage. Integrated efforts from local residents, local governments and national government are needed to set up a management scheme for the Dang culture. Rural villages in Jeju with the Dang and Oreum are expected to get an international attention as to have traditional cultural landscapes of Korea.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.4
• /
• pp.337-345
• /
• 2015

Pumices from the summit area of the Mt. Baekdu was analysed with respect to the physical characteristics. Fallout pumice deposits around the somma of the Cheonji caldera, Mt. Baekdu consist mainly of white pumices, but black pumices and gray pumices are also displayed together. White pumices are mainly rhyolitic($SiO_2$ 71.1%) and black pumices are trachytic($SiO_2$ 64.8%) in composition, and gray pumices are intermediate composition($SiO_2$ 68.0%) between white pumices and black pumices. Average density of felsic magma formed the Mt. Baekdu pumices is $2.45g/cm^3$ in anhydrous magma and $2.33g/cm^3$ in hydrous magma, respectively. We determined the density and calculated the vesicularity of three different coloured pumices, which collected in the vicinity of the Waho-bong(2,566 m) and Gwanmyeonbong(2,526 m) of southern somma of the Cheonji caldera, Mt. Baekdu. Average density of the yellow pumices was measured as $0.74g/cm^3$, black pumices as $0.75g/cm^3$, and gray t0 white pumices as $0.73g/cm^3$. Average density regardless of the colour of pumices was nearly constant at $0.75g/cm^3$. Vesicularity of pumices is calculated to be 67.8~69.4% and these pumices can be classified as a highly vesicular according to classification of vesiculation characteristics.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.3
• /
• pp.162-174
• /
• 2014

An abnormal decrease in ozonesonde sensor signal occurred during air-pollution study campaigns in November 2011 and March 2012 in Mexico City Metropolitan Area (MCMA). Sharp drops in sensor signal around 5 km above sea level and above were observed in November 2011, and a reduction of signal over a broad range of altitude was observed in the convective boundary layer in March 2012. Circumstantial evidence indicated that $SO_2$ gas interfered with the electrochemical concentration cell (ECC) ozone sensors in the ozonesonde and that this interference was the cause of the reduced sensor signal output. The sharp drops in November 2011 were attributed to the $SO_2$ plume from Popocat$\acute{e}$petl volcano southeast of MCMA. Experiments on the response of the ECC sensor to representative atmospheric trace gases showed that only $SO_2$ could cause the observed abrupt drops in sensor signal. The vertical profile of the plume reproduced by a Lagrangian particle diffusion simulation supported this finding. A near-ground reduction in the sensor signal in March 2012 was attributed to an $SO_2$ plume from the Tula industrial complex north-west of MCMA. Before and at the time of ozonesonde launch, intermittent high $SO_2$ concentrations were recorded at ground-level monitoring stations north of MCMA. The difference between the $O_3$ concentration measured by the ozonesonde and that recorded by a UV-based $O_3$ monitor was consistent with the $SO_2$ concentration recorded by a UV-based monitor on the ground. The vertical profiles of the plumes estimated by Lagrangian particle diffusion simulation agreed fairly well with the observed profile. Statistical analysis of the wind field in MCMA revealed that the effect Popocat$\acute{e}$petl was most likely to have occurred from June to October, whereas the effect of the industries north of MCMA, including the Tula complex, was predicted to occur throughout the year.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.3
• /
• pp.126-139
• /
• 2014

In order to estimate the influence of sources on $PM_{2.5}$ in the industrial area of Japan, we carried out a source analysis using chemical component data of $PM_{2.5}$. $PM_{2.5}$ samples were collected intermittently at an industrial area in Japan from July 2010 to November 2012. Water soluble ions ($Cl^-$, $NO_3{^-}$, $SO{_4}^{2-}$, $Na^+$,$NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$), elements (Al, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, Sb, Pb), and carbonaceous species (OC, EC) of the $PM_{2.5}$ (a total of 198 samples) were analyzed. Positive Matrix Factorization (PMF) model was applied to the data of those chemical components to identify the source of $PM_{2.5}$. At this observation site, nine factors were extracted. The major contributors of $PM_{2.5}$ were secondary sulfate 1, in which loading factors of $SO{_4}^{2-}$ and $NH_4{^+}$ were large (percentage source contribution: 20.9%), traffic, in which loading factors of OC (organic carbon) and EC (elemental carbon) were large (20.8%), secondary sulfate 2, in which loading factors of K and $SO{_4}^{2-}$ were large (8.0%), steel mills (7.8%), secondary chloride and nitrate (7.0%), soil (5.0%), heavy oil combustion (3.8%), sea salt (3.8%), and coal combustion (2.3%). The conditional probability function (CPF) and the potential source contribution function (PSCF) were carried out to examine the influence of a regional source and a broad-based source, respectively. CPF results supported local source influences such as steel mills, sea salt, traffic, coal combustion, and heavy oil combustion. PSCF results suggested that ships in the East China Sea, an industrial area of the east coastal region of China, and an active volcano in the Kyushu region of Japan were potential regional sources of secondary sulfate 1. Secondary sulfate 2 was affected by the burning of biomass fields and by coal combustion in Chinese urban areas such as Beijing, Hebei, and western Inner Mongolia. Source characterization using continuous data from one site showed a potential source representing fossil fuel combustion is affected both by regional and broad-based sources.

• Journal of the Korean earth science society
• /
• v.32 no.7
• /
• pp.860-870
• /
• 2011

This study is to explore the Pedagogical Content Knowledge of beginning earth science teachers about the porphyritic texture of igneous rocks, and to suggest the teaching device that can prevent a trial and error of students in earth science instruction. We developed an interview guideline concerned with basic perception on the porphyritic texture, formation condition and formation process of porphyritic rocks, teaching and learning on porphyritic rocks for it. And data was collected from 5 beginning earth science teachers (3 high schools, 2 middle schools) through a group discussion method. In result, despite the porphyritic texture can be found at hypabyssal rocks as well as volcano rocks and plutonic rocks, most beginning earth science teachers cognized that it could be found at hypabyssal rocks only by focusing the formation depth of hypabyssal rocks. Also, the formation of porphyritic texture should be considered the factors such as cooling rate, nucleation density, growth rate, growth time, etc. However they mainly reflected the formation temperature and growth rate as it's parameter. Participants have wrongly perceived that a phenocryst necessarily differs from a groundmass on chemical composition. And they are inclined to discriminate phenocryst from groundmass through their chemical differences, instead of grain size.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.135-145
• /
• 2019

The slope collapse can be classified into internal and external factors. Internal factors are engineering factors inherent in the formation of slopes such as soil depth, slope angle, shear strength of soil, and external factors are external loading such as earthquakes. The external factor for earthquake can be expressed by various values such as peak ground acceleration (PGA), peak ground velocity (PGV), Arias coefficient (I), natural period (T_p), and spectral acceleration (S_aT=1.0). Specially, PGA is the most typical value that defines the magnitude of the ground motion of an earthquake. However, it is not enough to consider the displacement in the slope which depends on the duration of the earthquake even if the vibration has the same peak ground acceleration. In this study, numerical analysis of two-dimensional plane strain conditions was performed on engineered block, and slope responses due to seismic motion of scaling PGA to 0.2 g various event scenarios was analyzed. As a result, the response of slope is different depending on the presence or absence of sliding block; it is shown that slope response depend on the seismic wave triggering sliding block than the input motion factors.

• Journal of the Korean Geographical Society
• /
• v.43 no.6
• /
• pp.791-807
• /
• 2008

The purpose of this study is to analyze landform characteristics and geomorphic processes in Dokdo seamount. For geomorphic analysis, bathymetry data were collected by multi-beam echosounder and the seismic survey was also conducted. Through the detailed analysis of depth, slope, aspect and erosional landform, Dokdo Seamount is characterized by a flat or gently sloping top of $2^{\circ}$ or less and seamount slope with $14{\sim}40^{\circ}$ gradient. There are protrusion of landform around the Dokdo on top of the Dokdo seamount. It is inferred that the features are formed by collapsed debris deposits or remained bedrocks by differential erosion in the past. The massmovement topography including slump and slide is shown on seamount slope with $14{\sim}40^{\circ}$ gradient. In addition, gullies with various length are developed on the Dokdo seamount slope. Slope erosional processes occur more actively along the submarine gullies on the Dokdo seamount. It is inferred that the massmovement processes on the slope of Dokdo seamount are related to earthquake activities and evolution of submarine volcano. Consequently, slope of the Dokdo seamount has retreated by erosional processes of mass-movement and submarine gullies.

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.225-232
• /
• 2003

Three piston cores. obtained from the northwestern Ulleung Basin of the East Sea, are analyzed to study the tephrostratigraphy of the late Quaternary core sediments and to reveal the comparative characteristics of the tephra layers. The cores consist mainly of the muddy sediments that are partly interbedded with lapilli tephra and ash layers. The muds are further divided into hemipelagic and turbiditic mud facies. The hemipelagic facies is dominated by bioturbated mud and crudely laminated mud, whereas the turbiditic facies includes mainly thinly laminated mud and homogeneous mud, and often alternates with non-turbiditic muds. According to microscopic observation and EDX analysis, three tephra layers of the Ulleung-Oki (U-Oki; ca. 9.3 ka), Aira-Tanzawa (AT: ca. 22~24.7 ka) and Ulleung-Yamato (U-Ym; ca. 25~33 ka) are identified in the study cores. Among these, the U-Oki and U-Ym layers, originating from the Ulleung Island, consist mainly of massive-type glass shards with alkali feldspar. Both of the tephra layers contain a lower content of SiO$_2$ (57~66.5 wt.%) and a higher content of Na$_2$O+K$_2$O (11~16 wt.%) than the AT layer (SiO$_2$=75~78.5 wt.%, Na$_2$O+K$_2$O=6.5~9 wt.%) that consists of typical plane-type and/or bubble-wall glass grains. Compared with that of the U-Ym layer, a sedimentary facies of the U-Oki layer is very thick and contains three stratigraphic units, probably due to relatively large and different supplies of pyroclastic sediments. Thus, the eruption of Ulleung Volcano (ca. 7,300 B.C.) is thought to have had a more powerful effect on depositional environment than the U-Ym eruption.