• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.1-6
• /
• 2008

본 연구에서는 게임에서의 몰입도 증가를 위해 기존 버튼 방식의 입력에 사용자의 자연스러운 동작을 이용한 입력과 진동 촉감을 출력하는 게임 컨트롤러를 제안한다. 동작을 이용한 입력장치는 가속도 추적기와 적외선 비디오 카메라를 동시에 사용한다. 두 정보의 장단점을 보완/융합해서 컨트롤러의 움직임을 추적하고, 사용자의 동작을 인식한다. 다양한 종류의 진동촉감은 보이스코일 진동자를 이용하여 제공된다. 또한, 제안하는 게임 컨트롤러를 게임의 상호작용에 적용하는 방법을 제공하고, 응용 프로그램에의 적용가능성을 살펴본다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.467-472
• /
• 2005

Load/Unload(L/UL) technology includes the benefits, that is, increased areal density, reduced power consumption and improved shock resistance contrary to contact start stop(CSS). It has been widely used in portable hard disk drive and will become the key technology for developing the small form factor hard disk drive. The main objectives of L/UL are no slider disk contact or no media damage. For realizing those, we must consider many design parameters in L/UL systems. In this paper, we focus on the effect of the ramp profile. We can find out the lateral velocities in L/UL process through experiments and simulations for force of voice coil motor and friction force on ramp. And then, we will gain the optimal design of ramp slope to maintain the minimum clearance of suspension dimple and slider with FE model. In special, after finding the point at which air bearing breaks and designing the ramp, we will identify the results for improving unload performance.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.396-401
• /
• 2009

본 연구에서는 실감형 컨텐츠를 위한 리모트 컨트롤러의 하드웨어 및 소프트웨어적 개선점을 살펴본다. 보이스코일 모터와 진동 모터를 모두 사용한 진동 촉감 제공 방법을 제시하며, 마커의 크기 및 카메라 파라미터 최적화를 통한 위치 추적 시스템의 성능 향상을 살펴보고 효율적인 세그멘테이션 및 비전 데이터 추가를 통한 동작 인식의 개선점을 살펴본다. 또한, 제시된 컨트롤러의 실감형 컨텐츠에 대한 적용 가능성을 살펴본다.

• 한국정보통신학회논문지
• /
• 제15권6호
• /
• pp.1381-1385
• /
• 2011

최근 출시되는 고사양의 Hand-phone에 적용되어진 Camera Module은 대부분 Auto Focusing기능이 탑재되어 있으며 Camera Module의 화소 수가 높아지면서 좀 더 정밀하고 안정적인 AF구동제품이 소비자에 의해 요구되고 있다. 본 논문은 현재 출시되고 있는 Camera Module적용 VCM(Actuator)의 문제점인 Auto Focusing시 Lens 초점위치 및 Module 자세에 따른 해상도편차 발생으로 해상도 보증 및 안정된 Actuator 구동을 위해 개선된 구조의 변경구조 VCM을 제안한다.

• 한국생산제조학회지
• /
• 제25권1호
• /
• pp.75-82
• /
• 2016

In this study, a cross-damped low vibration controller was developed to reduce vibration in ultra-precision dual stage driven by master/slave principle. In master-slave structure, the master stage leads the driving motion and the slave stage follows it so as to maintain a constant gap between two stages. In this structure, a small perturbation of master stage makes big oscillations in slave servoing stage, so a low damped master stage composed of voice coil motor makes a long vibration in settling area after driving motion profile. In this research, an effective feedback damping algorithm for increase the damping characteristics of the dual stage was developed. The designed velocity damping algorithm improves the system stability and reduces the settling time of the whole system. Simulation and experimental results show that the developed algorithm reduces settling time and improves the regulating performance.

• 한국소음진동공학회논문집
• /
• 제19권7호
• /
• pp.667-672
• /
• 2009

This paper is concerned with the development of linear magnetic actuator for active vibration control. The newly developed linear magnetic actuator consists of permanent magnets and copper coils. On the contrary to the voice-coil type actuator, the linear magnetic actuator utilizes magnetic flux to generate the shaft movement. In this study, experiments on the prototype linear magnetic actuator were carried out to investigate its dynamic characteristics. Block and inertia forces generated by the actuator were measured. The experimental results show that the actuator can be used as both actuator and active tuned-mass damper. The linear magnetic actuator was attached to a cantilever as the active-tuned mass damper and active vibration control experiment was carried out. The experimental results show that the newly developed linear magnetic actuator can be effectively used for the active vibration control of structures.

• Tribology and Lubricants
• /
• 제21권2호
• /
• pp.71-76
• /
• 2005

This paper compares of mechanical tensile properties of 6 kinds of copper foil. The beam lead made with copper foil. Different from other package type such as plastic package, Chip Size Package has a reliability problem in beam lead rather than solder joint in board level. A new tensile loading system was developed using voice-coil actuator. The new tensile loading system has a load cell with maximum capacity of 20 N and a non-contact position measuring system based on the principle of capacitance micrometry with 0.1nm resolution for displacement measurement. Strain was calculated from the measured displacement using FE analysis. The comparison of mechanical properties helps designer of package to choose copper for ensuring reliability of beam lead in early stage of semiconductor development.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1453-1459
• /
• 2012

본 연구에서는 보이스코일 모터와 압전 구동기를 동일 축으로 배치함으로써 초정밀 위치결정뿐만 아니라 동특성을 개선할 수 있도록 하는 듀얼 스테이지를 다룬다. 듀얼 스테이지는 모델링이 엉성할 경우 오히려 나쁜 동특성을 보이는 단점이 있다. 이 논문은 본드그래프를 이용하여 듀얼 스테이지를 모델링하고 동적 상태방정식을 본드그래프에서 유도하였다. 또한 동특성을 향상시키기 위한 보상기의 설계 예시를 보이고 있으며, 시뮬레이션을 통해 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제15권12호
• /
• pp.1197-1202
• /
• 2009

We present a power-efficient driving scheme that consists of piezoelectric actuator and driver IC for AF (Auto-Focus) on ISM (Image Sensor Module). The piezoelectric actuator is more power-efficient than conventional voice coil motor actuator. And high power-efficiency driver IC is designed. So the proposed driving scheme using designed piezoelectric actuator and driver IC is more close to recent trend of green IT. The diver IC should guarantee fast and accurate performance. So, the optimum driving method and high accurate frequency synthesizer are proposed. The die area of designed driver IC is $2.0{\times}1.6mm^2$ and power consumption is 2.8mW.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1742-1756
• /
• 1997

The acoustic characteristics of a direct radiator type loudspeaker has been studied in this paper. The natural modes of the speaker cone vibration analyzed numerically by the finite element method have been verified by comparing them with experimental results. The so-ap-proved finite-element model has been used to calculate the vibration response of the cone excited by the voice coil. The vibration displacement of the speaker cone paper has been converted into the vibration velocity and used as a boundary condition for the acoustic analysis. The frequency characteristics, directivity, and sound pressure distribution of the loudspeaker have been calculated by the boundary element method. The numerical results have been verified by the experiments carried out in an anechoic chamber. The variations of the acoustic characteristics due to the changes of some design parameter values can be examined using the numerical model.