• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.46-50
• /
• 2001

Adaptive signal processing is used to acoustic echo canceller. adaptive noise canceller and adaptive algorithm among adaptive algorithms is mainly used because the structure is simple and computa LMS algorithm has trade-off between the converge speed and the steady state error. In this paper, step-size of adaptive algorithm is varied with orthogonality Principles of optimal filter to get fasts though small steady state error. Time varying step-size is determined proportional to the maximum vector of LMS algorithm. As results of simulations, the adaptive algorithm with proposed time-v compared with conventional ones.

• Journal of Korea Multimedia Society
• /
• v.8 no.6
• /
• pp.753-760
• /
• 2005

This paper introduces a variable step-size adaptive algorithm for blind source separation. From the frequency characteristics of mixed input signals, we need to adjust the convergence speed regularly in each frequency bin. This algorithm varies a step-size according to the magnitude of input at each frequency bin. This guarantee of the regular convergence in each frequency bin would become more efficient in separation performances than conventional fixed step-size FDICA. Computer simulation results show the improvement of about 5 dB in signal to interference ratio (SIR) and the better separation quality.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.693-696
• /
• 1999

This paper describes a new voltage recorder for the voltage management of a power distribution line by using a new voltage measurement technique. The RMS(Root Mean Square) voltage measurement for the power line under the assumption of a sinusoidal input voltage is taken by the full-wave rectifier, half-adder utilizing operational amplifier(OP) circuit. A/D converter utilizing a dual slope converter converts an analog voltage signal into a serial pulse. The pulse is counted with a single chip micro-controller, converted with the RMS voltage, and saved into a flash memory. In the last, a new voltage recorder with compact size and multifunction is developed. Also, Voltage Management System that can analyze the stored data via RS-232C cable is developed based on Windows 95 and Visual C++.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.3
• /
• pp.502-509
• /
• 2007

This study evaluates thermal comfort by air conditioner temperature raising at the point of time that human body begins to adapt. Thermal comfort according to change of time enters by uncomfortable area gradually at general cold room temperature that magnetic pole is in human body. However, can know that keep continuous thermal comfort in case raise temperature in human body adaptation visual point. Experiments were performed in environmental chamber. Subjects were selected 4 men and 4 women whose life cycle were proved that are similar. The subjects stay in the pretesting room during the 30 minutes and enter the testing room under each experiment conditions. During the experiment, brain wave, electrocardiogram, blood pressure and thermal comfort and sensation responses were measured. In this study, physiological and psychological responses correspond under temperature raising at human body adaptation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1332-1335
• /
• 1996

It is very important to predict the future position for the heavy vehicle with evasive maneuvering. In this paper, we considered for the manual image tracking system. The vehicle images are received from gyro stabilized mirror system, pass through the optical lens, processed, and displayed on the TV monitor. The operator try to lay the reticle to the center of vehicle image. When the vehicle is moving, the mirror platform (actually the line of sight) should follow the vehicle and the angular rate information is picked up from the mirror stabilized system. This rate signal should be used to predict the future vehicle position. The problem is that the visual system of the human operator is in the closed loop system. The rate signals are disturbed by the operator. In addition, there are some non linearities concerned with the control handle bar and the servo control system. The proposed Kalman filter, combined with some modifications for operator disturbance rejection, improved the predication of the future vehicle position when compared with the conventional passive filter used.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.346-349
• /
• 1993

A method for image compression based on decomposition is presented. We design the efficient coding technique for upper band image signals. This coding technique with directive 1-D DPCM is based on the statistical properties of upper bands. Lower band image signals is encoded using 2-D DPCM. The directive 1-D DPCM is performed, scanning upper bands according to edge direction. And then the predicted error signals of upper band sis coded using B1 and Huffman code, and the predicted error signals of lower band is coded using Huffman code. The proposed system shows improved performance when compared with other existing methods with respect to peak signal to noise ratio(PSMR) and human visual system(HVS) properties.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.132.2-132
• /
• 2001

In this paper, we propose an efficient configuration of a system for the remote control of a mobile robot. The interface has a video feedback and runs in standard web environments. For control servers of mobile robot and CCD camera, we use the environment with embedded web server Specific program has been developed in order to grab the images using Microsoft Visual C++ The external camera sends the video signal to a framegrabber in the PC, then this program grabs the images and puts them in shared memory in BMP format. For a video feedback, we use image feedback based on the client pull technique supported by Netscape and Internet Explorer.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.335-338
• /
• 2003

The recognition limit of brightness difference in the visual system of human has not been studied system-atically. In this paper, endeavor to calculate surround adapted Weber-Fechner fractions based on the crispening effect was added to the traditional Weber-Fechner fractions. It is found that surround adapted fractions have reduced to 1/3 of the traditional fractions. As compared with Breitmeyer's experiments, the presented result is a reasonable one. It can be used as some guide to design the digital display system when a designer needs to decide bit count of digital signal in considering of the limit of brightness level, and as the inspection tool of display manufacturing of brightness smear, defect, and so on.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.363-364
• /
• 2002

We describe quadrature type surface coil for functional magnetic resonance imaging at 3T MRI system. The coil consisted of two coplanar resonators and was used as both transmitter and receiver. The signal-to-noise ratio (SNR) of the coil was compared with that of a standard birdcage head coil. Visual cortex activation on normal subjects using LED flicker was performed. The SNR of surface coil was found to be better than that of the conventional head coil.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.118-123
• /
• 2004

The compressor has one of important roles in refrigeration cycle and it determines refrigeration efficiency and quality This paper aims to monitor rotary compressors for room air conditioners by using Acoustic Emission(AE) technique. The reliability of rotary compressors has been evaluated through visual inspection on them after long term test. This paper describes methods for acquisition and processing AE raw signal to monitor the state of rotary compressor. A detecting method of abnormal compressor in real time is suggested and special-purpose monitoring system which can be applied to automatic manufacturing line is developed using one-chip microprocessor at low cost.