• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.136-143
• /
• 2010

Realistic Modeling is to maximize the reality of the environment in which perception is made by virtual environment or remote control using two or more senses of human. Especially, the field of haptic rendering, which provides reality through interaction of visual and tactual sense in realistic model, has brought attention. Haptic rendering calculates the force caused by model deformation during interaction with a virtual model and returns it to the user. Deformable model in the haptic rendering has more complexity than a rigid body because the deformation is calculated inside as well as the outside the model. For this model, Gibson suggested the 3D ChainMail algorithm using volumetric data. However, in case of the deformable model with non-homogeneous materials, there were some discordances between visual and tactual sense information when calculating the force-feedback in real time. Therefore, we propose an algorithm for the Volume Haptic Rendering of non-homogeneous deformable object that reflects the force-feedback consistently in real time, depending on visual information (the amount of deformation), without any post-processing.

• PNF and Movement
• /
• 제14권2호
• /
• pp.121-130
• /
• 2016

Purpose: The purpose of this study was to investigate the effects of visual and auditory stimulation on the ability to perform exercise. Methods: One hundred twenty subjects were randomly divided into four groups (Green light and Fast tempo music, GF; Green light and Slow tempo music, GS; Red light and Fast tempo music, RF; and Red light and Slow tempo music, RS). One of either two visual stimuli or one of two auditory stimuli were applied to each group. The experiment was conducted randomly twice in two environments: one had visual and auditory stimuli and one had no stimulation. Muscle strength, grip, endurance, quickness, agility, concentration, and balance were measured to determine the ability to perform exercise. Results: Significant differences were found in the muscle strength of the participants who were exposed to the auditory factor and the interaction of visual and auditory factors. In endurance, significant differences were found in all of the factors: visual, auditory, and the interaction of visual and auditory. In quickness, agility, and balance ability there were significant differences in the visual factor. In concentration, there was a significant difference in the auditory factor. Conclusion: Visual stimuli, auditory stimuli, and their interaction influenced the ability to perform exercise. These facts imply that providing the proper environmental stimulation is important to increase the ability to perform during exercise.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2231-2236
• /
• 2005

CP (Cellular Phone) is currently one of the most attractive technologies and RT (Robot Technology) is also considered as one of the most promising next generation technology. We present a new technological concept named RCP (Robotic Cellular Phone), which combines RT and CP. RCP consists of 3 sub-modules, $RCP^{Mobility}$, $RCP^{Interaction}$, and $RCP^{Integration}$. $RCP^{Interaction}$ is the main focus of this paper. It is an interactive emotion system which provides CP with multi-emotional signal receiving functionalities. $RCP^{Interaction}$ is linked with communication functions of CP in order to interface between CP and user through a variety of emotional models. It is divided into a tactile, an olfactory and a visual mode. The tactile signal receiving module is designed by patterns and beat frequencies which are made by mechanical-vibration conversion of the musical melody, rhythm and harmony. The olfactory signal receiving module is designed by switching control of perfume-injection nozzles which are able to give the signal receiving to the CP-called user through a special kind of smell according to the CP-calling user. The visual signal receiving module is made by motion control of DC-motored wheel-based system which can inform the CP-called user of the signal receiving through a desired motion according to the CP-calling user. In this paper, a prototype system is developed for multi-emotional signal receiving modes of CP. We describe an overall structure of the system and provide experimental results of the functional modules.

• 제어로봇시스템학회논문지
• /
• 제12궈1호
• /
• pp.33-40
• /
• 2006

We present a new technological concept named RCP (Robotic Cellular Phone), which combines RT and CP. That is an ubiquitous robot. RCP consists of 3 sub-modules, RCP Mobility, RCP interaction, and RCP Integration. RCP Interaction is the main focus of this paper. It is an interactive emotion system which provides CP with multi-emotional signal receiving functionalities. RCP Interaction is linked with communication functions of CP in order to interface between CP and user through a variety of emotional models. It is divided into a tactile, an olfactory and a visual mode. The tactile signal receiving module is designed by patterns and beat frequencies which are made by mechanical-vibration conversion of the musical melody, rhythm and harmony. The olfactory signal receiving module is designed by switching control of perfume-injection nozzles which are able to give the signal receiving to the CP-called user through a special kind of smell according to the CP-calling user. The visual signal receiving module is made by motion control of DC-motored wheel-based system which can inform the CP-called user of the signal receiving through a desired motion according to the CP-calling user. In this paper, a prototype system is developed far multi-emotional signal receiving modes of CP. We describe an overall structure of the system and provide experimental results of the functional modules.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.41-44
• /
• 2009

This paper describes an implementation of virtual teeth modeling for a haptic dental simulation. The system allows dental students to practice dental procedures with realistic tactual feelings. The system requires fast and stable haptic rendering and volume modeling techniques working on the virtual tooth. In our implementation, a volumetric implicit surface is used for intuitive shape modification without topological constraints and haptic rendering. The volumetric implicit surface is generated from input geometric model by using a closest point transformation algorithm. And for visual rendering, we apply an adaptive polygonization method to convert volumetric teeth model to geometric model. We improve our previous system using new octree design to save memory requirement while increase the performance and visual quality.

• 패션비즈니스
• /
• 제10권4호
• /
• pp.70-77
• /
• 2006

The purpose of this study is to evaluate the differences of visual image by variations in the location and width of the waist band of the one-piece dress. The stimuli are 24 samples: 8 variations of the location of the waist band and 3 variations of the width of the waist band. The data has been obtained from 50 fashion design majors. The data has analyzed by Factor Analysis, Anova, Scheff's Test and the MCA method. The results of the study are as follows. According to the result of factor analysis of the visual image based on the changes in the location and width of waist bands, three factors were identified- attractiveness, elegance and practicality. Among them, attractiveness was found to be the most important. The visual image was evaluated positively when waist bands were positioned above the natural waist line and negatively when waist bands were positioned below the natural waist line regardless of their width. In addition, the visual image based on the width of waist bands for one-piece dress was the most positive when the width was 4.5cm. No significant difference was observed in the visual image according to band width when the waist bands were positioned below the natural waist line. The interaction of visual image according to the location and width of waist bands for one-piece dress did not appear. As the main effect, significant differences were observed in all of the three factors according to the location of waist bands, but only two factors excluding elegance showed some difference according to the width of waist bands. When multiple classification analysis was applied to the factors without interaction, the location of waist bands appeared to have more significant effect on visual image than the width of waist bands.

• 감성과학
• /
• 제20권2호
• /
• pp.127-136
• /
• 2017

주의 깜박임이란 RSVP상에서 두 개 이상의 표적을 탐지할 때 먼저 제시 된 표적(T1)에 대해서는 정확성이 높지만 이후 500ms 이내의 표적(T2)에 대해서는 체계적으로 수행이 저하되는 현상을 말한다. 이를 설명하는 이론들은 주의용량결핍 모형과 주의여과지연 모형으로 분류할 수 있다. 한편, 시각적 주의 용량은 좌우 시각영역에서 독립적으로 작용하는 반시야 독립성으로 인해 다양한 과제에서 양측영역이득이 나타난다고 알려져 있다. 본 연구는 주의 용량의 반시야 독립성을 이용하여 주의 깜박임을 설명하는 두 갈래의 이론을 검증하였다. 실험 1은 T1과 T2를 포함하는 두 개의 RSVP를 양쪽 시야 영역에 나누어 제시하거나 한쪽 시야 영역에 제시하여 주의 깜박임과 양측영역이득간의 상호작용을 검증하였다. 실험 2는 하나의 RSVP에서 T1을 제거함으로써 양쪽 시야 영역에 T1과 T2가 독립된 주의용량을 사용할 때에도 주의 깜박임이 나타나는지 확인하였다. 그 결과 두 개의 RSVP를 양쪽 시야 영역에 나누어 제시하였을 때 더 우수한 수행을 보여주었으나 (즉, 양측영역이득) 주의 깜박임과 양측영역이득의 상호작용은 나타나지 않았다. 또한, T1이 제시되지 않은 RSVP의 T2에서도 주의 깜박임 현상을 관찰할 수 있었다. 이 결과들은 주의 깜박임에 대한 주의여과지연 모형을 지지한다.

• 한국실내디자인학회논문집
• /
• 제15권5호
• /
• pp.104-111
• /
• 2006

Digital media changed not only our lifestyle and sense of value but also art and space design, and development of technology will accelerate the alteration. It provided limitless possibility and inspiration to art, architecture and design. In this 'image' era, media communicate with us mostly in visual method, which gets to he realized by visual interface. The purpose of this study is to analyze the tendency of visual interface of contemporary interior design cases in the standpoint of digital media characteristics and suggest directions for future space design. The characteristics of digital media and interface are defined, and how the concept unfolded in art, design is also discussed. In interior design, the concepts come out as various types of visual interface, showing the characteristics of composition of material and immaterial, interaction between visual information and space users and among users, realization of cyberspace and simultaneous coexistence of multiple space-time multi-layer.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.631-646
• /
• 1996

The purpose of this study was to investigate the difference of visual evaluation about silhouette image. The specific objective were; 1) to construct of silhouette image evaluation instrument using semantic differential scale for the purpose of measuring the width and length; 2) to identify the factor structure of the silhouette; 3) to test the difference of visual perception to the silhouette as the variation of width; 4) to test the difference of visual perception to the silhouette as the variation of length; 5) to test interaction effect between width and length. The major finding were; For the visual evaluation of silhouette as shoulder width variatiorl, there were significant difference in hardness and softness factor. For the hard and soft image, we should express by variation of the shoulder width. For the visual evaluation of silhouette as skirt width variation, there were significant difference in attention factor. For the attensive image, we should express by variation of the skirt width. For the visual evaluation of silhouette as skirt length variation, there were significant difference in activity factor. For the active image, we should express by variation of the skirt length.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.159-170
• /
• 2015

Radio-Frequency Identification (RFID) or Near Field Communication (NFC) technology has many advantages over other visual interfaces since it does not require line-of-sight alignment, can identify multiple tags simultaneously, and does not destroy the integrity of original objects. In addition, smart devices such as smartphone and smartpad have NFC/RFID readers which can provide mobile and natural interactions with digital and physical contents. Augmented reality has an excellent visual interaction capability with digital contents in a real environment by embedding digital contents into the physical world. In this paper, we propose a new approach to digital content interactions using RFID/NFC-based tangible interfaces in augmented reality environments that utilize invisible interfaces in addition to marker-based visual interfaces. By combining the advantages of invisible and visual interfaces, more intuitive interactions with digital contents can be provided, which can remove the difficulty of using typical AR paddles that are widely used in AR interactions. In particular, a semantic AR ontology is defined to provide more convenient interactions. Through the semantic ontology-based inferencing, physical querying and filtering are effectively supported. We will show the effectiveness and advantage of the proposed approach by demonstrating implementation results.