• Title/Summary/Keyword: Visible storage

Search Result 104, Processing Time 0.027 seconds

Use of Visible Storage for Display and Conservation Treatment of a Large-sized Jar Coffin (대형 옹관의 보존처리 과정과 이를 활용한 개방형 수장고의 운용)

  • Kwak, Eungyung;Lee, Hyejin;Yu, Sohyun
    • Conservation Science in Museum
    • /
    • v.19
    • /
    • pp.41-52
    • /
    • 2018
  • This paper describes the restoration and display of a large jar coffin at the Naju National Museum. Excavated from Tomb No. 3 at Bokam-ri, Naju, the large jar is 194 cm in height and its rim diameter is 108 cm. The jar had been broken into approximately forty fragments prior to its restoration, and a supporting structure was installed to ensure the safety of the relic during the restoration process. The restoration was conducted inside a visible storage for large jar coffins for approximately three weeks from February 5 to February 27, 2018. Over two weeks during this period, the restoration efforts inside the storage were visible to the public in the permanent exhibition space so that visitors could observe the process in person. This was planned to help visitors understand and arouse their interest in large-sized relics such as jar coffins and the restoration process. This study also investigates the practices of overseas institutions in order to suggest plans for raising public awareness of conservation treatment at conservation science centers.

Oxide Glasses for Holographic Data Storage

  • Poirier, Gael;Nalin, Marcelo;Ribeiro, Sidney J.L;Messaddeq, Younes
    • Ceramist
    • /
    • v.10 no.3
    • /
    • pp.86-90
    • /
    • 2007
  • Novel photochromic oxide glasses are presented in this section. These glasses are based on phosphate formers containing both tungsten and antimony atoms. Exposure to visible continuous or pulsed laser beam results in an intense photochromic effect witch is shown to occur in the volume of the glass and results in a broad absorption band in the visible and near infrared. This effect was not identified to be related with a structural change and is assumed to be entirely electronic. A change in the absorption coefficient is observed in function of tungsten content, exposure time and increases with beam power. These glasses have been investigated regarding the possibility of holographic data storage using visible lasers sources. Changes in both refractive index and the absorption coefficient were measured using a holographic setup. The modulation of the optical constants is reversible by heat treatment.

  • PDF

The photocatalytic water splitting into $H_2$ and $O_2$ mimicking a Z-scheme mechanism (광합성을 모사한 광촉매 물분해 수소 제조)

  • Jeon, Myung-Seok;Hong, Joon-Gi;Chun, Young-Gab;Choi, Ho-Suk
    • Journal of the Korean Solar Energy Society
    • /
    • v.23 no.4
    • /
    • pp.29-35
    • /
    • 2003
  • We studied the water splitting into $H_2$ and $O_2$ using two different semiconductor photo catalysts and redox mediator, mimicking the Z-scheme mechanism of the photosynthesis, $H_2$ evolution took place on a Pt-$SrTiO_2$ (Cr-Ta doped) photocatalyst using $I^-$ electron donor under the visible light irradiation. The Pt-$WO_3$ photocatalyst showed an excellent activity of the $O_2$ evolution using $IO_3^-$ electron acceptor under visible light. $H_2$ and $O_2$ gases evolved in the stoichiometric ratio($H_2/O_2$=2) under visible light using a mixture of the Pt-$WO_3$ and Pt-$SrTiO_3$ (Cr-Ta doped) suspended in NaI aqueous solution. We proposed a two-step photo-excitation mechanism using redox mediator under the visible irradiation.

Infrared and visible image fusion based on Laplacian pyramid and generative adversarial network

  • Wang, Juan;Ke, Cong;Wu, Minghu;Liu, Min;Zeng, Chunyan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.15 no.5
    • /
    • pp.1761-1777
    • /
    • 2021
  • An image with infrared features and visible details is obtained by processing infrared and visible images. In this paper, a fusion method based on Laplacian pyramid and generative adversarial network is proposed to obtain high quality fusion images, termed as Laplacian-GAN. Firstly, the base and detail layers are obtained by decomposing the source images. Secondly, we utilize the Laplacian pyramid-based method to fuse these base layers to obtain more information of the base layer. Thirdly, the detail part is fused by a generative adversarial network. In addition, generative adversarial network avoids the manual design complicated fusion rules. Finally, the fused base layer and fused detail layer are reconstructed to obtain the fused image. Experimental results demonstrate that the proposed method can obtain state-of-the-art fusion performance in both visual quality and objective assessment. In terms of visual observation, the fusion image obtained by Laplacian-GAN algorithm in this paper is clearer in detail. At the same time, in the six metrics of MI, AG, EI, MS_SSIM, Qabf and SCD, the algorithm presented in this paper has improved by 0.62%, 7.10%, 14.53%, 12.18%, 34.33% and 12.23%, respectively, compared with the best of the other three algorithms.

Evaluation of Beef Freshness Using Visible-near Infrared Reflectance Spectra (가시광선-근적외선 반사스펙트럼을 이용한 쇠고기의 신선도 평가)

  • Choi, Chang-Hyun;Kim, Jong-Hun;Kim, Yong-Joo
    • Food Science of Animal Resources
    • /
    • v.31 no.1
    • /
    • pp.115-121
    • /
    • 2011
  • The objective of this study was to develop models to predict freshness factors (total viable counts (TVC), pH, volatile basic nitrogen (VBN), trimethylamine (TMA), and thiobarbituric acid (TBA) values) and the storage period in beef using a visible and near-infrared (NIR) spectroscopic technique. A total of 216 beef spectra were collected during the storage period from 0 to 14 d at a $10^{\circ}C$ storage. A spectrophotometer was used to measure reflectance spectra from beef samples, and beef freshness spectra were divided into a calibration set and a validation set. Multi-linear regression (MLR) models using the stepwise method were developed to predict the factors. The MLR results showed that beef freshness had a good correlation between the predicted and measured factors using the selected wavelength. The correlation of determination ($r^2$), standard error of prediction (SEP), and ratio of standard deviation to SEP (RPD) of the prediction set for TVC was 0.74, 0.64, and 2.75 Log CFU/$cm^2$, respectively. The $r^2$, SEP, and RPD values for pH were 0.43, 0.10, and 1.10; those for VBN were 0.73, 1.45, and 2.00 mg%; those for TMA were 0.70, 0.19, and 2.58 mg%; those for TBA values were 0.73, 0.13, and 2.77 mg MA/kg; and those for storage period were 0.77, 1.94, and 2.53 d, respectively. The results indicate that visible and NIR spectroscopy can predict beef freshness during storage.

Effects of Storage Environmental Conditions on Weight Loss, Whiteness Change, and Microbial Activity of Mushrooms (Agaricus bisporus)

  • Pai, Tongkun
    • Journal of Applied Biological Chemistry
    • /
    • v.43 no.3
    • /
    • pp.161-164
    • /
    • 2000
  • The effects of storage temperature and high relative humidity (RH) on the weight loss, color change, and microbial activity of a mushroom ('Sylvan' hybrid white) were investigated. The experiment was performed at three temperature (5, 10 and $15^{\circ}C$) and four different relative humidity levels (91, 94, 97 and 99%). The weight loss of the tested samples had a highly correlated linear relationship with storage time at each RH level during storage. Both the storage temperature and RH levels in the experiment had signigicant effects (p<0.05) on the weight-loss rate of the tested samples. The loss whiteness of mushrooms was not significantly affected (p>0.05) by RH ranges at the same temperature. No visible damage was caused by either bacteria or fungi in all samples during storage.

  • PDF

Analysis of Vanadium Ions and SOC in the Electrolytes of VRFB-ESS (VRFB-ESS용 전해질의 이온가수 분석방법 및 SOC 분석)

  • Seo, Hai-Kyung;Park, Wonshik;Kim, Kangsan
    • KEPCO Journal on Electric Power and Energy
    • /
    • v.7 no.2
    • /
    • pp.309-316
    • /
    • 2021
  • For the detection of the state of charge in VRFB-ESS, the analyses of UV-Visible spectrometry and the measurements of potential between the anolyte and catholyte were used in parallel. This paper includes the production of 4-valant ion from VOSO4 powder, 3- and 5-valant ions from electrochemical charge of 4-valant ion and 2-valant ion from 3-valant ion. It also includes the analyses of these valance ions and unknown electrolyte at any time using UV-Visible spectrometry. Through the analyses of the valance ions in samples, the SOCs of the samples at any charge-discharge times were verified.

Oil Storage Tank Inspection using 3D Laser Scanner (3D 레이저스캐너를 활용한 유류 저장탱크의 검사)

  • Park, Joon-Kyu;Lee, Keun-Wang
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.12
    • /
    • pp.867-872
    • /
    • 2020
  • Oil storage tanks are a major structure in chemical industrial complexes. Damage to the structure due to natural disasters or poor management can cause additional damage, such as leakage of chemicals, fire, and explosion, so it is essential to understand the deformation. In this study, data on oil storage tanks were acquired using a 3D laser scanner, and various analyzes were performed for storage tank management by comparing them with design data. Modeling of the oil storage tank was performed using the data and design drawings acquired by a 3D laser scanner. An inspection of the oil storage tank was effectively performed by overlapping. In addition, cross-sectional and exploded views of the deformation were produced to generate visible data on the deformation of the facility, and it was suggested that the oil storage tank had a maximum deformation of -7.16mm through quantitative analysis. Data that can be used for additional work was obtained by producing drawings to be precisely inspected for areas with large deformation. In the future, an inspection of oil storage tanks using 3D laser scanners is quantitative and visible data on oil storage tank deformation. This will greatly improve the efficiency of facility management by rebuilding it.

AN EXPERIMENTAL STUDY ON THE PHYSICAL PROPERTIES OF DENTURE BASE RELINERS (의치상 재이장재의 물리학적 성질에 관한 연구)

  • Kwon, Yong-Won;Cho, In-Ho
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.28 no.1
    • /
    • pp.193-202
    • /
    • 1990
  • The purpose of this study was to compare the fithness, hardness and bending strength of the conventional reliners and visible light curing reliner. Nine regions were selected in the upper transverse section which were thought to be of interest from a clinical standpoint and the discrepancies between the dentures and the master cast in these regions were determined by the coordinated measuring machine(UMM-500, Zeiss, W. Germany). The results were as follows ; 1. The experimental denture bases showed the lowest fittness at the central portion of the posterior palatal border and the intimate contact in the buccal flanges regardless of relining materials and relining methods. 2. The fittness of relined denture base was the best in autopolymerizing group and in the order of long processing, short processing and visible light curing group. 3. The fittness after 24 hour-storage in water was improved in long processing and autopolymerizing groups, but there was no significant difference. 4. The hardness was the highest in long processing group and decreased in the order of short processing, visible light curing and autopolymerizing group. 5. The bending strength was the highest in long processing group and decreased short processing, visible light curing, and aotopolymerzing group in order.

  • PDF

Dependence of Ethyl Carbamate Formation on the Fermentation Variables in Korean Traditional Soysauce (재래식 간장의 제조조건이 ethyl carbamate 생성에 미치는 영향)

  • 정현정;권훈정
    • Korean journal of food and cookery science
    • /
    • v.13 no.2
    • /
    • pp.92-98
    • /
    • 1997
  • Ethyl carbamate is an animal carcinogen and a by-product of fermentation. Since the highest level of ethyl carbamate was found in a traditional soy sauce sample in the previous study, soysauce was prepared in varying experimental conditions with three kinds of meju originated from different area of the country to investigate the factors affecting ethyl carbamate formation. The sample analysis methods included a semi-purification with solid-phase extraction and detection by GC-MS at SIM mode using m/z 62 fragment ion. Among the investigated factors, which includes source meju, bringing length, salt content, irradiation of visible light during bringing or storage, and storage length, source meju and storage length showed most profound effect on the formation of ethyl carbamate. Irradiation of visible light for 12 hours a day during storage lowered the concentration of ethyl carbamate compared to the soysauce kept in the dark. Meanwhile irradiation during the bringing as well as the degree of salt contents showed no effect.

  • PDF