• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1426-1433
• /
• 2015

CCTV-applied monitoring is an effective measure to suppress potential crimes and record objective relationship; however, there is no methodology that can quantitatively compare and assess the afore-mentioned effects. Thus, this study intended to construct the methodology and analysis application that can measure the changes in the space-corresponding performance of CCTVs depending on installation measures by using 3-dimenstional virtual simulation technology. For analysis, the raster-based Isovist theory was 3-dimensionally expanded and the amount of incident sight line to each point was accumulated. At the same time, the amount of overlapped monitoring in the CCTV cameras that were connected to each measurement node was accumulated for cross-analysis. By applying the examples and analyzing the results, it was possible to construct an analysis application in use of collision detection model and quantify the changes of monitoring performance depending on positioning alternative of the cameras. Moreover, it enabled intuitive review and supplementation by reproducing visible shadow areas in a graph.

• The KIPS Transactions:PartC
• /
• v.9C no.5
• /
• pp.725-732
• /
• 2002

Presented is a Genetic Algorithm (GA) for dynamic partitioning an ATM LANE(LAN Emulation) network. LANE proves to be one of the best solutions to provide guaranteed Quality of Service (QoS) for mid-size campus or enterprise networks with minor modification of legacy LAN facilities. However, there are few researches on the efficient LANE network operations to deal with scalability issues arising from broadcast traffic delivery. To cope with this scalability issue, proposed is a decision model named LANE Partitioning Problem (LPP) which aims at partitioning the entire LANE network into multiple Emulated LANs (ELANS), each of which works as an independent virtual LAN.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.351-360
• /
• 2010

Purpose: As the influence of mass media increases, the general standard of attractiveness or beauty of a face also changes. The primary purpose of the study is to find out the factors of the attractive and beautiful face recognized by public. Methods: We picked out standard model photography and operated with Adobe$^{(R)}$ Photoshop$^{(R)}$ and Monariza$^{(R)}$ virtual plastic surgery program. The contour of face, eye, nose, forehead, zygoma, chin and proportion of upper, middle, lower face were changed. The interview survey was conducted through structured standard photo for 310 respondents. That was utilized in the final analysis. Multiple regression analysis was executed by SPSS 12.0. It was used to deal with statistical data and all the other necessary analysis. Results: According to general characteristics of the respondents, many differences were found in preferred face and facial aesthetic subunits. The younger generation preferred the lozenge and inverted triangle shape contour. The respondents over 40 of age preferred the egg shape contour. In chin and zygoma contour, the respondents at the age of 20 preferred distinctly small chin and relatively small lower face. On the other hand, the respondents over 40 of age preferred the wide zygoma relatively. In the proportion of upper, middle, lower face, 51.0% of respondents answered 1 : 1 : 1. If they want to have an aesthetic operation, they preferred protruding forehead. Also they preferred the small chin and V-shaped chin in frontal view. Conclusion: Many respondents preferred to have a plastic surgery for the better facial subunit. The statistical evidence from this study suggests that the harmony and balance of facial aesthetic subunits make attractive and beautiful face.

• The Mathematical Education
• /
• v.46 no.4
• /
• pp.371-388
• /
• 2007

This is a case study trying to understand from the view of affordance which certain three middle school students perceive an activation of previous knowledge in the course of problem solving when they solve algebra word problems with a previous knowledge. The results of this study showed that at first, every subjects perceived the text as affordance which explaining superficial similarities, that is, a working(painting)situation rather than problem structure and then activated the related solution knowledge on the ground of the experience of previous problem solving which is similar to current situation. The subject's applying process for solving knowledge could be arranged largely into two types. The first type is a numeral information connected with the described problem situation or a symbolic representation of mathematical meaning which are the transformed solution applied process with a suitable solution formula to the current problem. This process achieved by constructing a virtual mental model that indicating mathematical situation about the problem when the solver read the problem integrating symbolized information from the described text. The second type is a case that those subjects symbolizing a formal mathematical concept which is not connected with the problem situation about the described numeral information from the applied problem or the text of mathematical meaning, which process is the case to perceive superficial phrases or words that described from the problem as affordance and then applied previously used algorithmatical formula as it was. In conclusion, on the ground of the results of this case study, it is guessed that many students put only algorithmatical knowledge in their memories through previous experiences of problem solving, and the memories are connected with the particular phrases described from the problems. And it is also recognizable when the reflection process which is the last step of problem solving carried out in the process of understanding the problem and making a plan showed the most successful in problem solving.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.820-830
• /
• 1989

The tire inflation and contact problem has been solved by a finite element method. The finite element formulation is derived from the equilibrium equations by the principle of virtual work in the form of an updated Lagrangian formulation for incremental analysis. Then, a contact formulation is added to the finite element formulation to calculate stress state of tire in contact with flat rigid road under the load due to the self-weight of a vehicle. In the finite element analysis, equations of effective material properties are introduced to analyze a plane strain model of the shell-like tire by considering the bending effect of reinforced steel cords. The proposed equations of effective material properties produced stress concentration around the edge of belt layers, which does not appear when other well-known equations of material properties are adopted. The result from the above algorithm demonstrates the validity of the formulation and the proposed equations for the effective elastic constants. The result fully interprets the cause of separation between belt layers by showing the stress concentration.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.6
• /
• pp.17-34
• /
• 2020

In response spectrum analysis of pile-supported structure, an amplified seismic wave should be used as the input ground acceleration through the site-response analysis. However, each design standard uses different input ground acceleration criteria, which leads to confusion in determining the appropriate input ground acceleration. In this study, the ground accelerations were calculated through dynamic centrifuge model test, and the response spectrum analysis was performed using the calculated ground acceleration. Then, the moments derived from the test and analysis were compared, and a method for determining the appropriate input ground acceleration in response spectrum analysis was presented. Comparison of the experimental and simulated results reveals that modeling of the ground using elastic springs allows proper simulation of the natural period of the structure, and the use of a seismic wave that is amplified at the ground surface as the input ground acceleration provided the most accurate results for the response analysis of pile-supported structures in sands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2315-2322
• /
• 2008

The requesting a consultation of the farm manager is about the diagnosis and prevention of the breeding and extermination for diseases and insects in greenhouse, the managing problem for diseases and insects turn up a main issue. To solve these problems, this paper proposes a PDA based greenhouse, diseases and insects management system for mobile(GDIMS) uses as keeping up with ubiquitous time, which makes prediction and management for diseases and insects more efficiently checked at any time and anywhere you want to, and go well with the motto of ubiquitous. This system is using the environmental data from the greenhouse attached sensors provide the accurate diagnosis and recipes, which supports to product clean crops. There are no need to visit the greenhouse because our system is based on mobile devices that obtain the information in the greenhouse, which makes management in efficient with little number of people. This wort builds simply virtual greenhouse model that assembles system component of environmental sensor for performance analysis and offers a PDA view of the greenhouse status.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.797-808
• /
• 2019

This study evaluated the applicability of spacebourne datasets to the flood analysis in an ungauged watershed where is no discharge measurements. The Duman River basin of North Korea was selected as a target area which was flooded by recent Typhoon Lionrock. Topographical parameters for flood analysis were estimated from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global Digital Elevation Model (GDEM). GDEM includes the shortcomings of information on river cross-section, and conducted 2 dimensional flood analysis when considering virtual river cross-section and not considering it. As a result of comparative analysis, an error occurs in the inundation area and depth, but when used carefully, it is considered that the satellite image can be used for creating flood hazard map and utilizing information for response and preparation.

• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.21-30
• /
• 2016

Recently manufacturing companies have used PLC control programs popularly for their automated production systems. Since the life cycle of production process is not so long, the change of the production lines occur frequently. Most of changes happen with modification of the position information and control process of the equipment. PLC control program is also modified based on the fundamental process. Therefore, to verify new PLC program by configuring virtual space according to real environment is needed. In this paper we show a logical modeling method, based on Timed-FSA useful for sequence control and dead-lock prevention. There is a problem wasting user's labor and time when defining a variety of states in a device. To overcome this problem, we propose an extended I-O model based on existing methods by adding a token concept of Petri Nets. Also we will show the usability of the extended I-O modeling through user study.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.11 no.1
• /
• pp.9-16
• /
• 1974

To contribute towards more accurate estimation of the virtual inertia coefficient for the horizontal vibration of ships, three dimensional correction factor $J_H$ for the added mass of finitely long elliptic prismatic bars in horizontal vibration in a free surface of an ideal fluid are calculated. In the problem formulation Dr. T. Kumai's quasi-finite length concept[1,11,12] is employed. Now that, in Dr. Kumai's work[1] for the horizontal vibration the mathematical model was a circular cylinder, the principal aim of the authors' work is to investigate the influence of the beam-draft ratio B/T on $J_H$. The numerical results of this work are shown in Fig.3 graphically, from which we may recognize that the influence of B/T on $J_H$ is remarkable as much as that of the length-draft ratio L/T(refer to Fig.1 also). In Fig.3 the curves for B/T=2.00 are of those based on Dr. Kumai's result[1]. On the other hand, the experimental data obtained by Burril et al.[9] for the horizontal vibration of finitely long prismatic bars of various cross-section shapes are compared with the theoretical added mass coefficients defined by combination of the authors' $J_H$ from Fig.3 and two dimensional coefficients $C_H$ obtained by Lewis form approximation for the corresponding sections. They are in reasonable correspondence with each other as shown in Fig.2. Finally, considering that the longitudinal profile of full-form ship's hull is well resembled to that of an elliptic cylinder and that the influences of other factors such as the sectional area coefficient and the shape of section contour itself can be well merged in the two dimensional added mass coefficient, the authors recommend that the data given in Fig.3 may be successfully adopted for the three dimensional correction factor the added mass in the horizontal vibration of hull-form ships.