• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.538-541
• /
• 2009

본 논문에서는 촉각기반 비디오 및 오디오 스트리밍 기술 개발을 설명한다. 제안하는 스트리밍 기술은 촉각정보를 포함한 비디오 프레임과 함께 진동정보를 가진 오디오를 실시간으로 전송해주는 방법에 대한 구현을 설명한다. 촉각정보 전송을 위하여 비디오 화면을 일정한 크기의 셀로 나누어 각 셀에 비디오 화면의 콘텐츠에 대응하는 촉각정보를 적용시켜 주었다. 이 정보들은 특정 형식으로 파일로 저장되게 되고 촉각정보 전송에 사용되게 된다. 촉각정보 전송은 비디오 프레임과 교차하며 전송된다. 이렇게 전송된 비디오와 촉각정보는 클라이언트 컴퓨터에서 병렬적으로 처리되어 화면에 출력시켜준다. 진동정보를 가진 오디오를 전송하기 위해서는 사운드를 분석하여 특정 사운드에 적합한 진동을 적용시켜 주었다. 이런 방법으로 저장된 진동정보는 사운드 스트리밍과 동기화되어 사용자에게 전송되며 이를 통해 사용자는 관람하고 있는 비디오 화면을 만짐으로써 화면 콘텐츠의 재질을 느낄 수 있고 음향에 따라 다양한 패턴의 진동을 느낄 수 있다.

• 소음진동
• /
• 제8권4호
• /
• pp.733-740
• /
• 1998

본 논문은 덕트 내에 설치된 음향 스크린의 특성을 연구하였다. 다양한 형상의 음향 스크린의 투과 손실 측정을 통하여, 음향 스크린에 의해 생긴 두 개의 비대칭 경로가 특정 주파수에서 큰 협대역 소음 저감을 발생시킴을 알 수 있었다. 그리고, 실험과 수치적 모의 실험을 바탕으로 이러한 현상을 정확하게 설명할 수 있는 해석적 모델을 개발하였다.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.89-95
• /
• 2002

A shadow mask inside the Braun tube of a TV is sustained by springs attached to the glass panel, its vibration cause the picture image to discolor, which is called the microphonic phenomenon. It is found that it results from resonance when the natural frequency of the shadow mask coincides with that of built-in speaker sound. This paper describes experimental and analytical investigations by using FEM on the vibration problem of the shadow mask assembly. The simulation scheme may be efficiently used to develop a new design for a large-screen flat TV.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.564-568
• /
• 2006

Smooth picture module is operated by vibration to tilt the light from the DMD (digital micro mirror device) of DLP projection TV, which makes the screen of the TV smoother and DMD chip cost lower. To satisfy the vibration characteristics of smooth picture module, it is designed by optimizing moment of inertia, spring constant and damping coefficient, using structural and fluid dynamic simulation that showed a good agreement with experimental data. To reduce the material cost and moment of inertia, engineering plastic is used and the reliability is estimated. A VCM (voice coil motor) type actuator for smooth picture has to satisfy performance requirements such as higher driving force, lower power consumption, and lower cost. The initial design and optimization for VCM was performed using FE analysis. It allowed us to optimize the design of magnetic circuit of the proposed actuator to obtain higher force while maintaining a lower cost.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.670-677
• /
• 2009

The purpose of this study is to reveal the quantitative dose-response relationship between the noise emitted in the platform of subway station and the public response. The noise measured in the platform of subway station was used for a jury test. In order to find the factors which influence annoyance response due to the platform noise, jurors were examined for the difference of the annoying response, interrelation of sound quality parameter and annoyance response. The platform noise level was 77.2$\sim$83.9 dBA and the most of passengers at the platform were highly annoyed. And screen door contributes to annoyance reduction of platform noise. The results from analyzing sound quality parameters shows that loudness and annoyance response have a high correlation coefficient.

• 한국소음진동공학회논문집
• /
• 제11권4호
• /
• pp.43-51
• /
• 2001

An experimental modal analysis is the process to identify structure's dynamic characteristics such as resonant frequencies, damping values and mode shapes. An experimental model was made of stainless steel in the shape of a circular cylindrical shell and installed on the test bed with jigs. For investigating vibrational characteristics of the continuous circular cylindrical shell with intermediate supports, modal testing is performed by using impact hammer, accelerometer and 8-channel FFT analyzer. The frequency response function(FRF) measurements are also made on the experimental model within the frequency range from 0 to 4kHz. Modal parameters are identified from resonant peaks in the FRF's and animated deformation patterns associated with each of the resonances are shown on a computer screen. The experimental results are compared with analytical and FEA results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.718-723
• /
• 2004

The insertion loss of a noise barrier comes from the effects of diffraction, transmission loss, absorption coefficient and attenuation by direct propagation. The noise level after the noise barrier, differs reatly from the diffraction on the upper part of the barrier. Maekawa, furze and Anderson presented a empirical formula for calculating the diffraction of a semi infinte screen shaped noise barrier. In this syudy, Noise reduction performance software was developed for the proper design and assessment of new plastic barrier . Predicted sound pressure level from using the software is compared with the site-measurement results to verify the noise reduction performance and feasibility of prediction software for insertion loss of noise barrier.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1381-1385
• /
• 2000

In this paper, a guideline of axial flow fan design for noise reduction of refrigerators is p resented. Refrigerators have components which have a role to screen particular frequency air borne-noise which is generated by an axial flow fan set in them. Effective ways to use the particular characteristic of refrigerators are shown in this study. As a result of application of the methods, we reduced the noise of the target systems by more than 3 dB(A) from the viewpoint of air-borne noise produced by the axial flow fan set.

• 소음진동
• /
• 제5권1호
• /
• pp.123-132
• /
• 1995

The microphonic phenomenon in TV(television) is a phenomenon that a stained pattern locally appears in the screen or moves like waves. This can be observed when audio signal of TV has specific frequencies under loud volume of sound. In this study, microphonic phenomenon has been investigated, and two practical ways of circumventing this has been proposed. Based on modal analysis of several TV parts(Cathod Ray Tube, shadowmask, etc.), it was proved that the microphonic phenomenon is caused by the resonance of the shadow mask. One of the proposed ways to circumvent this phenonenon is increasing the thickness of the frame, the other is removing the middle welding points between the frame and the shadow mask. The effects of these modifications are evaluated by the finite element analysis, and the results show that the magnitude of vibration of shadow mask reduced by 10 - 20dB, which is large enough to provent microphonic phenomenon even under maximum level of sound volume.

• Smart Structures and Systems
• /
• 제13권5호
• /
• pp.775-796
• /
• 2014

This study presents a vibration-based health monitoring strategy for short span bridges utilizing an inspection vehicle. How to screen the health condition of short span bridges in terms of a drive-by bridge inspection is described. Feasibility of the drive-by bridge inspection is investigated through a scaled laboratory moving vehicle experiment. The feasibility of using an instrumented vehicle to detect the natural frequency and changes in structural damping of a model bridge was observed. Observations also demonstrated the possibility of diagnosis of bridges by comparing patterns of identified bridge dynamic parameters through periodical monitoring. It was confirmed that the moving vehicle method identifies the damage location and severity well.