• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.66-71
• /
• 1990

The prediction and estimation of R/C structure behavior subjected to earthquake type loading is partly based on the experimental results of the monotonically increased cyclic loading, rather than that of the irregularly increased cyclic loading. However, actual earthquake is typical random vibration. In this respect, comparing and analysing experimental test results of R/C specimens subjected to monotonically increased cyclic loading and irregularly increased cyclic loading, this study proposes the research direction of irregularly increased cyclic loading during earthquake.

• 한국산학기술학회논문지
• /
• 제12권4호
• /
• pp.1532-1538
• /
• 2011

본 연구에서는 반복되는 동하중에 의한 구조물 상부바닥에 나타나는 균열에 대한 연구를 수행하였다. 물류 센터 상층 바닥슬라브에 균열발생 원인으로 의심되는 지게차의 진동이 향후 운영상에 문제가 되고 있다. 따라서 본 연구에서는 주요지점에서 지게차의 운행/적하차시 발생하는 진동을 측정 및 분석 하였다. 측정된 진동을 바탕으로 진동허용규제치와 비교분석한 결과, 허용규제치를 초과하는 과도진동으로 판명되어 구조적 균열의 원인을 규명하였다. 또한 측정 결과 값을 바탕으로 범용 유한요소모델링 및 해석을 통해 진동저감을 위한 영향성을 평가하였다. 이에 따른 대책방안을 제시하였으며, 대책 안 시공 후 진동저감효과를 검증할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.396-401
• /
• 2006

Dynamic behaviors of the impact damper are studied experimentally and numerically. In order to investigate wide range of excitation frequencies and amplitudes, a simple but high amplifying and bias-free experimental setup is designed. Experiments focused on the harsh operation condition demonstrate Accelerated mass loading which not only deteriorates the performance of the impact damper but also involves the structural resonance which should be avoided for the stability of the system. In the previous studies, instability or deterioration of the performance was reported for the off resonance frequency region. But this paper shows that the performance deterioration and structural resonances can be predicted. Using finite element modeling and analysis, accurate system parameters were derived and used for the numerical modeling employing the conservation of the momentum. Numerical study of the transient responses using 4th-order Runge-Kutta method demonstrates general performance of the system, and shows that accelerated mass loading phenomenon is deeply related with the vibration amplitudes and the mass of the auxiliary system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.602-607
• /
• 1997

Ball balance belong to a kind of automatic balancers opten referred to as direct balancer or passive mass systems. In such systems the balancing is achieved with free masses. One of the most prevalent problems encountered in washing is the vibration during spin cycle. The primary cause of this vibration is mass unbalance associated with non unform distribution of clothes. Front loading type machine of European style, especially, has inherent unbalance mass due to its shape and this then makes the vibration worse than top loading type machine, which is more popular in Korea. Since the mass distribution of cloths is random and can not be predicted in advance, direct automatic balances appear to be the only feasible alternative. The results form computer simulation and experimental testing will be presented together with stability implications.

• Advances in materials Research
• /
• 제6권2호
• /
• pp.93-128
• /
• 2017

In this paper, thermal vibration behavior of nanoscale beams made of functionally graded (FG) materials subjected to various types of thermal loading are investigated. A Reddy shear deformation beam theory which captures both the microstructural and shear deformation effects without the need for any shear correction factors is employed. Material properties of FG nanobeam are assumed to be temperature-dependent and vary gradually along the thickness according to the power-law form. The influence of small scale is captured based on nonlocal elasticity theory of Eringen. The nonlocal equations of motion are derived through Hamilton's principle and they are solved applying analytical solution. The comparison of the obtained results is conducted with those of nonlocal Euler-Bernoulli beam theory and it is demonstrated that the proposed modeling predict correctly the vibration responses of FG nanobeams. The effects of nonlocal parameter, material graduation, mode number, slenderness ratio and thermal loading on vibration behavior of the nanobeams are studied in detail.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.930-938
• /
• 2004

This paper presents the noise source identification of a car A/V system. There are two different kinds of noise sources noise generated by loading mechanism and rattle noise by externally forced vibration. A dynamometer has been made to produce stationary inertia to the loading mechanism of A/V system. Sound pressure spectra and sound intensity were measured by operating the dynamometer setup as various motor speeds, and the results were analyzed. A dominant rattle noise source about A/V system's components has been found by multi-dimensional spectral analysis. Residual spectrum method was applied for eliminating coherence between the vibration sources. In result, the dominant rattle noise source was identified by partial coherent output spectrum of individual vibration component.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.442-458
• /
• 2014

Wave induced vibrations increase the fatigue and extreme loading, but this is normally neglected in design. The industry view on this is changing. Wave induced vibrations are often divided into springing and whipping, and their relative contribution to fatigue and extreme loading varies depending on ship design. When it comes to displacement vessels, the contribution from whipping on fatigue and extreme loading is particularly high for certain container vessels. A large modern design container vessel with high bow flare angle and high service speed has been considered. The container vessel was equipped with a hull monitoring system from a recognized supplier of HMON systems. The vessel has been operating between Asia and Europe for a few years and valuable data has been collected. Also model tests have been carried out of this vessel to investigate fatigue and extreme loading, but model tests are often limited to head seas. For the full scale measurements, the correlation between stress data and wind data has been investigated. The wave and vibration damage are shown versus heading and Beaufort strength to indicate general trends. The wind data has also been compared to North Atlantic design environment. Even though it has been shown that the encountered wind data has been much less severe than in North Atlantic, the extreme loading defined by IACS URS11 is significantly exceeded when whipping is included. If whipping may contribute to collapse, then proper seamanship may be useful in order to limit the extreme loading. The vibration damage is also observed to be high from head to beam seas, and even present in stern seas, but fatigue damage in general is low on this East Asia to Europe trade.

• Earthquakes and Structures
• /
• 제2권4호
• /
• pp.337-356
• /
• 2011

In this paper, cable-stayed bridges with single pylon and two equal side spans, with variations in geometry and span ranging from 120 m to 240 m have been studied. 3D models of the bridges considered in this study have been analysed using ANSYS. As the first step towards a detailed seismic analysis, free vibration response of different geometries is studied for their mode shapes and frequencies. Typical pattern of free vibration responses in different frequencies with change in geometry is observed. Further, three different seismic loading histories are chosen with various characteristics to find the structural response of different geometries under seismic loading. Effect of variation in pylon shape, cable arrangement with variation in span is found to have typical characteristics with different structural response under seismic loading. From the study, it is observed that the structural response is very much dependent on the geometry of the cable-stayed bridge and the characteristics of the seismic loading as well. Further, structural responses obtained from the study would help the design engineers to take decisions on geometric shapes of the bridges to be constructed in seismic prone zones.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1991년도 춘계학술대회논문집; 한국해사기술연구소, 대전; 1 Jun. 1991
• /
• pp.41-45
• /
• 1991

구조 진동에 의해 발생하는 Relative Sound Power를 계산하는 문제가 최근 에 중요시되고 있다. 이 논문에서는 조화적인 집중하중에 대한 무한 탄성보 에서 방출하는 Relative Sound Power를 연구한다. Sound Power는 수치적으 로 적분되고 몇가지 인자들의 함수로써 적분인자를 표시하였다. Keitie와 Peng[2]는 진동하는 보로부터의 방출하는 Relative Sound Power에 대한 하 중 길이의 효과, 그리고 water 하중을 받는 보에서 방출하는 Acoustic radiation에 대한 Source 운동과 기초 강성의 효과를 연구하였다. 보의 진동 응답에서 light fluid loading과 heavy fluid loading에 의한 양쪽의 반응을 고 려한다. 보에는 기초 강성과 Damping 그리고 장력이 작용한다. water 하중 과 air 하중을 받는 보에서 Damping의 변화에 대한 보로부터 방출하는 relative sound power의 크기를 결정하였다. 일반적으로 인장력보다 압축력 이 작용할 때 relative sound power level이 크다는 것을 알고 있다. 실제로 인장력이나 압축력이 보에 작용할 때 relative sound power에 얼마나 영향을 미치는가를 계산하였다. 그리고 진동계로부터 방출하는 sound fluid loading 과 기초 강성에 기인한 복잡한 효과를 해석하였다. 이 논문의 목적은 강성계 수와 wavenumber 비, 그리고 fluid loading에 대한 sound power의 응답에 대하여 설명하고자 한다.

• 한국소음진동공학회논문집
• /
• 제25권1호
• /
• pp.40-47
• /
• 2015

Dynamic response of any small structure is always affected by the mass of the attached accelerometer. This paper predicts the natural frequencies and frequency response functions by removing the mass loading effect from the accelerometer. This mass loading is studied on a simple cantilever beams by varying the location of accelerometer. By using sensitivity analysis with iteration method, accelerometer mass and location are obtained. The predicted natural frequencies of the small cantilever beam without the accelerometer's mass show good agreement with the structural re-analysis.