• 조명전기설비학회논문지
• /
• 제23권6호
• /
• pp.1-13
• /
• 2009

본 연구의 목적은 도심상업지역의 조도실태를 조사하여, CIE 조명환경구역 규정이 국내에 적용 가능한가를 검토하는 것이다. 현장조사를 통하여 도심상업지역 보행자 도로의 수평면 조도와 수직면 조도를 측정하였고, 조명환경에 대한 보행자의 만족도를 조사하기 위하여 설문을 실시하였다. 조사가 이루어진 장소는 모두 4곳으로 보행자 도로의 조명상태와 야간의 보행자 수가 각각 다른 곳이었다. 조도측정 결과 인구유동 및 조명상태에 따라 조도값이 차이를 보이고 있었으며, 설문조사 결과 보행자도로의 조도가 보행자의 조명환경 만족도에 영향을 미치는 것으로 나타났다. 마지막으로 CIE 조명환경구역의 조도 규정은 국내 도심상업지역에 적용할 수 있는 것으로 나타났다.

• 한국농촌건축학회논문집
• /
• 제10권3호
• /
• pp.27-34
• /
• 2008

Recently, the outdoor lighting of architectural Facade has increased for the improvement of night-scape in urban and coastal resort. The purpose of this research is to analyze lighting characteristics; Luminance, Illuminance, Color Temperature, Chromaticity in Gyengpo Park of Eastern famous coastal resort. The result of this paper is as follows: 1) The Luminance ratio was measured that compare to the 1:10 criterion(IESNA) was in excess to the most building except "K". Because of these condition, Luminance environments was injurious to visual health the overuse of the outdoor lighting or glare to the eyes. 2) The level of vertical Illuminance value was insufficient 33.3% among the cases of survey with 4Lux standard of CIE. 3) The kinds of outdoor lighting of BLDG were increased lighting emitting diode(LED), metal halide(MH) instead of reduction trend of neon, fluorescent light, halogen. As the crisis of Energy resources we will be investigate adapt method of outdoor lighting, which design is based on economical efficiency by the use of optimum lighting.

• 조명전기설비학회논문지
• /
• 제17권4호
• /
• pp.13-19
• /
• 2003

학교 교실 조명은 교사와 학생들에게 쾌적한 명시 환경을 주어 시력 보호와 학습 효과의 향상을 도모하는데 매우 중요한 역할을 하고 있다. 이러한 교실 조명 환경의 향상을 도모하기 위한 방법으로 칠판등 개발이 이루어지고 있다. 본 논문에서는 칠판면에 일정한 조도를 제공하고 효율이 높은 칠판등용 경면 반사판 형상을 설계하는 과정을 설명하였다. 이러한 과정에서 크기가 있는 광원에 의한 설계상의 문제점을 고찰하고자 한다.

• 한국실내디자인학회논문집
• /
• 제24권4호
• /
• pp.43-50
• /
• 2015

In lighting design and lighting in the light of how the physical space rather than the amount of light metering is implemented in the same space as horizontal illuminance and luminance study of the spatial analysis as a basis for improving the quality of scientific and cognitive aspects analyzed the vertical component of the light. Vertical component of the light and the ability to interpret the information space can be secured more easily sense the brightness of a small area compared to the horizontal components of electrical energy, due to the contrast between the dark and the surrounding induce customers to public facilities or commercial space The pedestrian aids to facilitate the determination of the copper. In addition, to secure the brightness of the overall sense of space allows to have a sense of comfort to lower the tension of the space. The vertical component of light also has a deep relationship to improving the quality of light in electrical energy savings increase the accessibility of space, space, nightscape in the humanities also contribute to environmental and looking for one trillion people in the city in terms of cultural development and identity There.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.591-598
• /
• 1998

Light intensity and spectral characteristics of different types of fluorescent lamps were tested to investigate their possibility as the artificial lighting sources for the close illumination applied in the transplant production factory. Photosynthetic photon flux densitiy(PPF), illuminance and irradiance for all lamps decreased logarithmically with an increase of the vertical distance from the lighting source. The fluorescent lamp specially designed plant growth (PG lamp) showed a maximum spectral irradiance at the wavelength of 660nm. However, it showed lower irradiance than that of a standard fluorescent lamp at the range of wavelength between 500 and 600nm. On the other hand, PG lamp showed higher PPF and lower illuminance than those of the standard fluorescent lamp. The maximum peak of spectral characteristics for both of the single and twin three-bind fluorescent lamps was shorn at the wavelength of 545m and the next peaks were shown at the wavelength of 610nm and 435nm, respectively. Since the red fluorescent lamp has a narrower peak at the wavelength of 660nm, it may be useful for the supplementary red lighting. For three of standard, single three-band and twin three-band fluorescent lamps, the values of conversion factor for converting illuminance to PPF fell within the narrow range from 76 to 791x/$\mu$molㆍm$^{-2}$ ㆍs$^{-l}$ . However, for PG lamp, it was 29.71x/$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$. Also, the values of conversion factor for converting PPF to irradiance of fluorescent lamp used in this study ranged between 4.85 and 5.34$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$/Wㆍm$^{-2}$ .

• 조명전기설비학회논문지
• /
• 제22권11호
• /
• pp.1-8
• /
• 2008

In this paper, the optical properties of the 54[W] LED module have confirmed by changing the angles of LED modules for street light applications. The angle of LED module changed from the $0[^{\circ}]$ to $60[^{\circ}]$ varying by $20[^{\circ}]$ as horizontal direction ${\ominus}_1$. Morever, the angle of LED module changed from the $0[^{\circ}]$ to $15[^{\circ}]$ varying by $5[^{\circ}]$ as vertical direction ${\ominus}_2$. As a result of simulation, the average illumination was about 17[lux] and the overall illuminance uniformity was 0.29 for a 10.39[m] long and 6[m] wide illuminance area at height of 6[m], which is acceptable for street lighting illumination in the Illuminating Engineering Society(IES) standard.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.22-30
• /
• 2015

Currently, in South Korea, 'Light Pollution Prevention Act by Artificial Lighting' has been enforced. For advertising lighting, it is limited based on only the light-emitting luminance. Luminance is a concept related to the glare. Not only the luminance of the light source, but also glare is affected depending on some situations like blinking, luminance contrast, background illuminance. This study conducted glare subjective evaluation with brightness, color, and blinking by looking at the LED lighting box. The results showed that the glare indexes were higher about 2 times in a decrease of background illuminance from 100lx to 0lx. The glare index of R, G, B light was higher than that of white light. The average glare index of the blue light was higher about 8 times compared to 2,700K. And the blink rate had little effect on the glare, but it affected the irritation. Therefore, the glare effect of light color and blinking needs to be considered for the standard of luminous environment.

• 감성과학
• /
• 제16권3호
• /
• pp.305-310
• /
• 2013

This user-centered research aims to empirically evaluate color temperature (K) and illuminance (lx) of residential bathroom lightings to determine the most optimal lighting conditions for productive task performance as well as for satisfying users' emotional needs. Using 3 LED lighting fixtures, 4 types of lighting contexts were investigated; main lighting, task lighting, shower lighting, and bath lighting. Two lightings were installed parallel to the vertical edges of the main bathroom mirror to be used as main and task lighting, while another fixture was installed above the bathtub to be used for shower and bathing. For each lighting context, subjects (N＝54) were instructed to perform a few tasks during which time the users were exposed to different lighting conditions with color temperature ranging from 2700 K ~ 6500 K and illuminance ranging from 100 lx ~ 700 lx. Upon completing the given tasks, subjects were asked to evaluate the lighting conditions and their applicability for performing the given tasks. Based on the user evaluations, the most optimal lighting conditions for the different lighting scenarios are as follow: 1) 3500 K ~ 4300 K and 150 lx for main lighting, 2) 3500 K ~ 4300 K and 500 lx ~ 700 lx for task lighting, and 3) 2700 K ~ 3500 K and 100 lx ~ 150 lx for shower/bath lighting. These results can be used to adjust the lighting standards suggested by KS, as well as be utilized by both engineers and designers in designing new types of user-centered bathroom lightings.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.16-26
• /
• 2004

우리나라의 경우 최근 경관조명의 중요성을 인식하고 많은 건축물과 광장, 조경, 역사적 모뉴멘트 등에 옥외조명이 설치되고 있다. 특히, 최근 쇼핑용 복합건물들은 옥외조명을 설치함으로써 건물의 인지도를 높이고, 그에 따라 매출을 증대시키고자 한다. 그러나, 대형 쇼핑용 복합빌딩에 옥외조명을 과다하게 설치함으로써 광공해를 발생시키고 있다. 이미 광공해에 대하여 선진외국에서는 조명조례와 광공해대책가이드 등을 제정하여 쾌적한 조명환경을 구축하려고 노력하고 있다. 이에 본 연구는 주로 야간에 많이 이용되는 3개의 복합쇼핑 빌딩에 설치된 옥외조명의 광공해의 발생 실태를 조사하였다. 이를 위하여 건물의 표면휘도, 보행도로의 수평면조도 및 연직면조도를 직접 현장에서 측정기구로 측정하여 CIE기준과 비교하였으며, 연구 결과는 다음과 같다. 전반확산형조명기구가 보행도로에 설치됨으로써 눈부심이 부분적으로 발생하고 있으므로 cut-off 조명기구를 설치할 필요가 있는 것으로 나타났다. 또한, 건물외관의 옥외조명은 건물의 인지도와 광고를 강조하기 위하여 휘도값을 크게 설계한 것으로 나타났다. 즉, 도로에 면한 건물표면의 측정휘도값이 CIE기준과 비교했을 때 2배정도 높게 나타났으며, 보도의 연직면 조도비도 권장값보다 크게 나타났다. 아직 우리나라의 경우 광공해에 대한 기준이나 가이드가 없으므로 이에 대한 대책이 절실히 필요하다.

• KIEAE Journal
• /
• 제15권4호
• /
• pp.21-28
• /
• 2015

Purpose: Although security lights are used to secure pedestrian visibility and safety at nighttime, they can generate light trespass in the neighboring residential space. To prevent this, standards for acceptance limits on vertical illuminance and light pollution by the windows of residential buildings are presented. Method: This study thus representatively selected three types of lamps and, through an evaluation and analysis of the physical and subjective discomfort glare per lamp, proposed a discomfort glare index for each lamp. The evaluation and analysis according to the lamps were conducted through experiments. The variables were the security lights' lamps (NH 100W, MH 70W, LED 50W), installation angles ($0^{\circ}$, $20^{\circ}$), and installation distances (3m, 5m, 7m, 9m). Result: According to the results of the discomfort glare evaluation depending on the angles and distances of the security lights, the following minimum standards are proposed: for NH 100W, a discomfort glare index of 30 and an installation distance of 4m; for MH 70W, a discomfort glare index of 32 and an installation distance of 4m; and, for LED 50W, a discomfort glare index of 31 and an installation distance of 6m, respectively. In addition, this paper recommends the use of MH 70W, when the road width is 4m-6m, and LED 50W, when the road width is over 6m, respectively.