• 에너지공학
• /
• 제11권4호
• /
• pp.350-358
• /
• 2002

The present work determined the flame structure characteristics of coal syngas combusted inside swirl burners with various nozzle types. Fuel nozzle types are largely classified into two groups of axial and tangential. Experiments were carried out for investigating the effects of fuel nozzle geometry, fuel composition ratio, heating rate, excess air, and degree of swirl on the turbulent diffusion flame structure. To determine the characteristics of the flame structure, axial type fuel nozzle diameter of laboratory-scale combustor is varied to 1.23, 1.96, and 2.95 ㎜ and the direction of tangential type nozzles are varied to radial, clockwise, and counter-clockwise. The comparison of the experimental results was performed to understand functional parameters relating the flame structure. Data analysis showed that the vertical straight flame height generally decreased with increasing swirl number and decreasing axial type nozzle diameter. Flame height established with tangential type nozzle is 3 times shorter than that with vertical type. The flame structures among the 3 different tangential fuel nozzles relatively showed no particular difference. By increasing the heating rate, the width of flame increased generally in both vertical and tangential flame. Within the present experimental parameters of the investigation, flame structure is mainly depends on the nozzle type of the combustor. The visually investigated flame lengths are confirmed through the analysis of temperature profile of each flame.

• 한국화재소방학회논문지
• /
• 제34권4호
• /
• pp.101-106
• /
• 2020

자체 제작된 니들 플레임을 이용하여 바닥재를 수직 연소시켰을 때의 화염의 성장 특성 및 탄화 패턴을 해석하였다. PVC 장판은 난연성이 있는 것으로 확인되었고, 직사 화염을 받은 곳은 안쪽으로 수축되는 패턴을 나타냈다. 수직 연소가 진행되면 하부에 망울 형태의 고형화가 발생하며, 그을음은 상부로 성장하는 패턴이 형성된다. 강화마루는 난연성이 없는 것으로 확인되었으며, 상부 표면인 라미네이트층의 소실과 불규칙적인 박리가 형성되는 것을 알 수 있다. 좌측면과 우측면의 탄화의 범위는 대칭적 구조를 나타내는 것으로 해석된다. 강화마루와 마찬가지로 카펫은 수직 연소 실험에서 난연성이 없는 것이 확인되었다. 카펫에 축열이 형성되면 화염은 상승기류를 형성하고, 주변에 가연성 물질이 있을 때 화염의 확산은 더욱 촉진하는 것을 알 수 있었다. 직사화염을 받은 카펫 표면의 탄화 패턴은 표면이 용융되어 흘러내렸을 뿐만 아니라 작은 구멍이 다수 발생되는 것을 알 수 있다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.183-191
• /
• 2004

The burning characteristics of interacting droplets with internal circulation in a convective flow are numerically investigated at various Reynolds numbers. The transient combustion of 2-dimensionally arranged droplets, both the fixed droplet distances of 5 radii to 40 radii horizontally and 4 radii to 24 radii vertically, is studied. The results obtained from the present numerical analysis reveal that the transient flame configuration and retardation of droplet internal motion with the horizontal or vertical droplet spacing substantially influence lifetime of interacting droplets. At a low Reynolds number, lifetime of the two droplets with decreasing horizontal droplet spacing increases monotonically, whereas their lifetime with decreasing vertical droplet spacing decreases due to flow acceleration. This flow acceleration effect is reversed when the vertical droplet spacing is smaller than 5 radii in which decreasing flame penetration depth causes the reduction of heat transfer from flame to droplets. At a high Reynolds number, however, lifetime of the first droplet is hardly affected by either the horizontal droplet spacing or flow acceleration effect. Lifetime with decreasing vertical droplet spacing increases due to reduction of flame penetration depth. Lifetime of interacting droplets exhibits a strong dependence on Reynolds number, the horizontal droplet spacing and the vertical droplet spacing and can be con-elated well with these conditions to that of single burning droplet.

• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.79-84
• /
• 2011

In this study, breakdown characteristics of a vertical sphere-plane air gap in the presence of combustion flame were examined under the application of a.c. and d.c. high-voltages in order to investigate the effect of flame on the dielectric strength of air. Propane gas is used as the fuel of the flame, and the temperature distribution of air around the flame is measured. The polarity effects for the d.c. voltages and breakdown voltages of air when applied both of a.c. and d.c. voltages were examined in the case of the variation of the gap length and the horizontal distance between the flame and the high-voltage sphere electrode. The influence of relative air density, electrification and shape changes of the flame as factors that affect the breakdown voltages were discussed.

• 한국재난관리표준학회지
• /
• 제3권2호
• /
• pp.41-46
• /
• 2010

본 연구는 최근 직물커튼의 대용으로 가장 많이 사용하고 있는 버티컬 브라인드와 롤 스크린을 대상으로 방염제품과 비 방염제품의 연소차이를 규명하여 방염의 필요성을 확인하고 방염제품의 방염성능 지속성을 실험을 통하여 규명하고자 소방대상물에 설치되어 장기간 사용한 버티컬 브라인드와 롤 스크린을 수거하여 세탁 전 후의 방염성능을 확인한다. 이 결과를 토대로 방염제품의 성능을 규명하고 외국의 방염관련 법규와 국내 방염관련 법규의 비교분석을 통하여 국내 방염법규의 확대적용 필요성과 개선점을 도출함을 목적으로 한다. 연구결과, 방염제품과 비 방염제품과의 성능과 안전성은 확연한 차이를 볼 수 있었다. 방염제품은 불꽃과 접하면 바로 연소를 하며 용융하고 단지 착화하지 않으므로 연소 확대를 막을 수 있다는 이점이 있다. 반면 비방염제품은 120 cm의 시험체가 전소하는데 불과 3분도 걸리지 않는 다는 것을 알 수 있다. 이를 실제 화재에 적용시 연소확대에 큰 차이를 보일 것이다. 내세탁성이 없는 브라인드의 경우 세탁을 하면 방염성능이 현저하게 감소할 것으로 예상을 했으나 세탁전과 비교하여 큰 차이를 보이지 않았다. 따라서 방염브라인드도 내 세탁성을 가질 수 있음을 입증하였고 엄격한 생산과정을 통한 내구성의 유지에 관심을 가져야 하겠다.

• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.85-92
• /
• 2008

많은 나라에서 가공 송전선로 아래에서 발생된 산불에 의해 계통 섬락사고를 일으키고 있다. 본 연구에서는 상용주파수 교류 및 직류 고전압을 인가하였을 때, 연소화염에 의해 전력선의 절연강도가 저하하는 특성을 조사하기 위해 수직배열 전력선에 대한 모의조건에서 다양한 실험을 수행하였다. 실험 결과, 화염이 없는 경우에 비해 연소 화염이 존재하면 화염의 거리(h)에 따라 절연파괴전압은 크게 저하되는 것으로 나타났다. 도체와 화염의 거리(h)가 작을수록 절연파괴전압이 감소하였으며, 교류전압 인가 시, h=9[cm]일 때 평균 46.2[%], h=3[cm]일 때 평균 62.5[%] 저하된 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.133-142
• /
• 2001

Investigation on ignition and flame propagation of pyrolyzing fuel in a cylindrical enclosure is accomplished. The pyrolyzing fuel of cylindrical shape is located in an outer cylinder sustained at high-temperature. Due to gravity, the buoyancy motion is inevitably incurred in the enclosure and this affects the flame initiation and propagation behavior. The radiative heat transfer plays an important role since a high temperature difference is involved in the problem. Therefore in all cases presented here, the intrinsic radiation effects are considered. Numerical studies have been performed over various governing parameters, such as Grashof number, overheat ratio, and vertical fuel eccentricity. Depending on the Grashof number, the flame behavior is found to be totally different: a separated visible flame appears as the Grashof number reaches 10(sup)7. The location of flame onset is also affected by the vertical eccentricity of inner pyrolyzing fuel as well as thermal conditions applied.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.878-883
• /
• 2001

The effects of external excitation with various frequencies and amplitudes on the flame behavior and pollution emission characteristics from a laminar jet flame are experimentally investigated. Measurements of $NO_{x}$ emission indices($EINO_{x}$), performed in unconformed and vertical lifted flame at resonance frequency by strong excitation, have been conducted experimentally. It was also conducted to investigate the effects of excited frequency on $NO_{x}$ emissions with a various frequency ranged 0Hz to 2kHz. From the vertical lifted flame like turbulent of the excited jet with resonance frequency was shown that the dependence of $NO_{x}$ emission could be categorized into three groups: Group 1 of intermediate flame length and relative narrow flame volume yielding low $NO_{x}$ emission, Group 2 of short flame length but large flame volume yielding high $NO_{x}$ emission and Group 3 of long flame length with low temperature contours yielding high $NO_{x}$ emission.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.680-685
• /
• 2000

Investigation on ignition and flame propagation of pyrolyzing fuel in a cylindrical enclosure is accomplished. The pyrolyzing fuel of cylindrical shape is located in an outer cylinder sustained at high-temperature. Due to gravity, the buoyancy motion is inevitably incurred in the enclosure and this affects the flame initiation and propagation behavior. The radiative heat transfer plays an important role since a high temperature difference is involved in the problem. Numerical studies have been performed over overheat ratio, and vertical fuel eccentricity. The location of flame onset is affected by the vertical eccentricity of inner pyrolyzing fuel as well as thermal conditions applied.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.15-21
• /
• 2019

A rack-type warehouse has the advantage of storing a large amount in a small area by loading goods vertically. But in terms of fire risk, the fire load is very high, which can cause massive damage in the event of a fire. In the United States, research has been actively conducted to minimize the spread of vertical fires, and relevant standards have been established and operated. In Korea, research and related standards are insufficient to prevent the vertical spread of rack-type warehouse fires. In this study, an experimental study was conducted to prevent the vertical spread of a rack-type warehouse fire using a horizontal barrier and in-rack sprinklers. As a result of the test, the horizontal barrier considering the continuous flame prevented the vertical spread of the flame for a certain time. However, the horizontal barrier with continuous flame did not show the effect of preventing continuous flame. The combination of the horizontal barrier and the in-rack sprinkler prevented the vertical spread of fire effectively. In addition, the heat collecting effect through the horizontal barrier was shown and helped the early operation of the in-rack sprinklers.