• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.44-54
• /
• 2018

Stress and fatigue of the distributor, an equipment of the high-pressure evaporator for the HRSG, were evaluated according to ASME Boiler & Pressure Vessel Code Section VIII Division 2. First, from the results of the piping system analysis model, reaction forces of the tubes connected to the distributor were derived and used as the nozzle load applied to the detailed analysis model of the distributor afterward. Next, the detailed model to analyze the distributor was constructed, the distributor being statically analyzed for the design condition with the steam pressure and the nozzle load. As a result, the maximum stress occurred at the bore of the horizontal nozzle, and the primary membrane stress at the shell and nozzle was found to be less than the allowable. Next, for the transient operating conditions given for the distributor, thermal analysis was performed and the structural analysis was carried out with the steam pressure, nozzle load, and thermal load. Under the transient conditions, the maximum stress occurred at the vertical downcomer nozzle, and of which fatigue life was evaluated. As a result, the cumulative usage factor was less than the allowable and hence the distributor was found to be safe from fatigue failure.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.95-104
• /
• 2016

In general, the crash reduction effect of the rumble strip is reported to be about 30% in Korea, while it is about 40-60% in the United States. However, the effect is erroneously overestimated because the simple comparison was only made before and after the installation. Accordingly, this study will reassess the crash reduction effect of the rumble strip. The study will also examine the former's geometric characteristics as well as its effect on the causes of the crash. This study analyzed the crash effect while taking into consideration the changes in the horizontal and vertical alignment, including the width of pavement shoulders, using the crash data for two years before and after the installation of the rumble strip. The types of crash caused by the rumble strip were identified using the classification discriminant function. The crash effect on the rumble strip is estimated to be 28.3%, but the pure effect, with the exception of the effect by other elements, was analyzed to be 7.4%. For each expressway design element, the downhill section (2.0-3.0%), the section with less than 3,000 m and more than 10,000 m of the curve radius, and the section with less than 3.0 m of the pavement shoulder width were found to be effective in crash reduction. For each cause of crash, the rumble strip was analyzed to be effective in the reduction of crash caused by "not keeping the safe distance", "sleeping", "negligence in keeping eyes forward", and "excessive handle operation". In particular, the rumble strip was analyzed and seen to be especially effective in preventing crash caused by "not keeping a safe distance," and "sleeping". The installation of the rumble strip was found to be effective in the prevention of crash caused by "not keeping the safe distance" and "sleeping". The results of this study may thus be used in deciding the causes of crash and the installation location of the tailored rumble strip that would be suitable for the geometric characteristics of the roads. This study will also be helpful in the establishment of future traffic safety measures.

• Journal of The Korean Association For Science Education
• /
• v.34 no.4
• /
• pp.359-366
• /
• 2014

In this study, we try to examine its features by using the methods of systematic infographics analysis for visualization materials that are used in Physics I textbooks. Thus, after developing the analytical framework infographics, visualization materials is described in the section "information and communication" and have been analyzed separately as "data visualization" and "Infographics." The results of this study are as follows. First, the analysis framework of infographics can be classified contents of the information, visual representation, and media method. Second, the visualization materials that are displayed in the section "information and communication" of Physics I textbook are of higher quality than most schematized data that are graphically, simple information. Third, the features of visualization materials in textbooks have many relations & functions on 'information content', text & metaphor on 'visual element', illustration & comparison on 'expression type', graphic on 'expression mode', printed matter on 'media method', and horizontal & vertical type on 'the flow of attention'. From the analysis results, in the section "information and communication" of Physics I textbook uses a lot of visualization materials, however it does not provide rich infographics but only simple graphical materials. By utilizing the results of the analysis of textbook and analysis framework of infographics, which has been developed through the this study, let us hope that the opportunity to be able to grasp the importance of infographics in science education be provided.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.4
• /
• pp.45-54
• /
• 2011

A simple model for reinforced concrete shear walls with boundary elements is proposed, which is a macro-model composed of spring elements representing flexure and shear behaviors. The flexural behaviour is represented by vertical springs at the wall ends, where the moment strength and rotational capacity of the wall are based on section analysis. The shear behaviour is represented by a horizontal spring at the wall center, where the key parameters for the shear behavior are based on the flexural behaviour since the shear walls with boundary elements are governed by the flexure. The proposed model was prepared with the results of hysteretic tests of the shear walls, and then the reliability of the hysteretic rule and variables was investigated by nonlinear dynamic analyses. Using parametric study with nonlinear dynamic analyses, the effect of the variables on demand and capacity, which are major parameters in seismic performance evaluation, are investigated. Results show that the measured and calculated shear forces versus the shear distortion relationships are slightly different, but the global response is well simulated. Furthermore, the demand and capacity are also changed in a similar way to the change in the major parameters so that the proposed model may be appropriate for reinforced concrete shear walls with boundary elements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.251-256
• /
• 2021

This study analyzed the most frequently used navigation cases in a desktop environment. As a result of the research, GNB induces users' search as the top element of the search structure and can place color, text, icon, and image elements. LNB could be classified in the form of a dropdown, flyout, dropline and mega menu. In this study, the navigation structure of Interpark and Interpark among open markets used by users was analyzed. G-Market's GNB has a two-tier structure with color, text, image, and icon elements, and Interpark has a three-tiered horizontal label. Interpark's GNB drew attention by placing a badge on the seasonal label, which is a temporary content section, unlike G-market. It can be seen that the LNBs of both shopping malls have flyout menus that protrude when you mouse over the category menu arranged in a vertical text form under the logo placed on the left. The flyout menu has a complex structure consisting of the layout of the mega menu. This study is meaningful in revealing user experience elements by analyzing the GNB and LNB of shopping malls these days where internet shopping is increasing.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.6
• /
• pp.669-677
• /
• 2011

The multi-span suspension bridge generally has more than three towers and two main spans. To economically and effectively design a multi-span suspension bridge, the proper stiffness ratio of the center tower to the side tower must be determined. This study was conducted to propose a method of figuring out briefly the structural behavior of the towers in a multi-span suspension bridge. In the equivalent suspension bridge model, the main cable of the multi-span suspension bridge is idealized as an equivalent cable spring, and the external loads of horizontal and vertical forces that were calculated using the tensile forces of the main cable were applied on top of the towers. The equilibrium equations of the equivalent multi-span suspension bridge model were derived and the equations were solved via nonlinear analysis. To verify the proposed method, a sample four-span suspension bridge with a main span length of 3,000 m was analyzed using thefinite element method. The displacements and moment reactions of each tower in the proposed method were compared with the FEM analysis results. Consequently, the results of the analysis of the equivalent suspension bridge model tended to be consistent with the results of the FEM analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.120-127
• /
• 2016

This study examined the dynamic characteristics of the gate to identify the optimal gate installation direction according to the installation direction. A 1:31 scale model was constructed for a 47.5m prototype gate using acrylic. The scaled weights were tuned by adding lead weights. The first step was to measure the natural frequencies of the model gates, and compare them with finite-element analysis of the prototypes as a calibration. The scaled model was tested in a 1.6 m wide concrete flume for two orientations to determine the effects of the gate orientation on structural vibrations. Vertical vibrations were measured under a range of operational conditions, including a range of bottom opening heights and different upstream and downstream water levels. For large bottom opening heights in the normal direction, relatively large vibrations were induced by vortices shed at the plate bottom that would strike the horizontal truss member. This phenomenon was avoided in the reverse direction. For small bottom opening heights in the normal direction, these vibrations were caused by a suction force that developed at the gate bottom. The gate model in the reverse direction was preferred because of its low overall vibrational response under general gate opening and flow level combinations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3C
• /
• pp.143-155
• /
• 2006

SPT-Uphole tomography method was introduced for the evaluation of near subsurface shear wave velocity (Vs) distribution map. In SPT-Uphole method, SPT (Standard Penetration Test) which is common in geotechnical site investigation was used as a source and several surface geophones in line were used as receivers. Vs distribution map which is the triangular shape around the boring point can be developed by tomography inversion. To obtain the exact travel time information of shear wave component, a procedure using the magnitude summation of vertical and horizontal components was used based on the evaluation of particle motion at the surface. It was verified that proposed method could give reliable Vs distribution map through the numerical study using the FEM (Finite Element Method) model. Finally, SPT-Uphole tomography method was performed at the weathered soil site where several boring data with SPT-N values are available, and the feasibility of proposed method was verified in the field.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.191-202
• /
• 2007

In these days, open signboard system is controlled by administrative policy and law, but there is no consideration for different types of building. As such, this study aims to propose planning criteria for streetside commercial buildings, such as elevation and mass design of buildings, layout of signboard attached to the building elevation with consideration for streetscape. In mass planning for streetside commercial buildings, the building type with front open space keeps lower open signboard density than the building type directly leading to the street. It is desirable that open signboard of lower floor part is attached by a horizontal type, open signboard of low medium floor part by a projected vertical type, open signboard of high medium floor part and roof part with a minumum attachment of open signboard. As for elevation planning relative to open signboard, it is desirable that an irregular wall type is more useful than a regular wall type to control open signboard. And in all cases, horizontal element facade has a handicap to control the quantity of signboard. If the building has a corner, the piloti should be used in the corner of lower story for smooth circulation of pedestrians and emphasizing the transparency of elevation. Specially, in the case of a round corner, the corner should be emphasized by the composition of high transparent mass.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.331-343
• /
• 2017

In this study to improve stability, workability and economics of the H-Pile+Earth plate or H-Pile+Earth plate+Cutoff grouting currently in use, we had developed HCS method belonging to the retaining wall which is consisting of a combination H-Pile, Plastic Sheet Pile and Steel Square Pipe for gap maintenance and reinforcement of flexible plastic Sheet Pile, and the behavior of each member composing HCS method is investigated by three-dimensional finite element analysis. To numerically analyze the behavior of the HCS method, we have performed extensive three-dimentional finite element analysis for three kinds of plastic Sheet Pile size, two kinds of H-Pile size and three kinds of H-Pile installation interval, one kinds of Steel Square Pipe and three kinds of Steel Square Pipe installation interval. After analyzing the numerical results, we found that the combinations of $P.S.P-460{\times}131.5{\times}7t$ (PS7) and H-Pile $250{\times}250{\times}9{\times}14$ (H250), $P.S.P473{\times}133.5{\times}9t$ (PS9) and H-Pile $300{\times}200{\times}9{\times}14$ (H300) is the most economical because these combinations are considered to have a stress ratio (=applied stress/allowable stress) close to that as the stiffness of H-Pile, plastic Sheet Pile and Steel Square Pipe composite increased, the horizontal displacement of the retaining wall and the vertical displacement of the upper ground decreased. Especially, due to the arching effects caused by the difference in stiffness between H-Pile and plastic Sheet Pile, a large part of the earth pressure acting on plastic Sheet Pile caused a stress transfer to H-Pile, and the stress and displacement of plastic Sheet Pile were small. Through this study, we can confirm the behavior of each member constituting the HCS method, and based on the confirmed results of this study, it can be used to apply HCS method in reasonable, stable and economical way in the future.