• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.889-893
• /
• 1991

This paper describe the mathematical model of helicopter rotor, which is suitable for the calculation of trim condition to develop the stability and control. The mathematical model is a nonlinear, total force and moment model of a single main rotor helicopter. The effects of fuselage, tail rotor, horizontal tail, and vertical tail are included. The phase angle and stick displacement are obtained and compared at the trim condition.

• Journal of Aerospace System Engineering
• /
• v.7 no.3
• /
• pp.15-19
• /
• 2013

Tail wing is important to designing of civil aircrafts, because it is responsible for aircraft stability and control. Tail wing has a role in aircraft control and makes aircraft fly stably without any pilot control input. Also, designing of tail wing determine trim drag force in whole aircraft. Center of gravity(CG) of aircraft travels with various effects as placement of passenger's seats, location of cargo bay, etc. In designing horizontal tail volume, aircraft CG travel has to be considered to have margin so that it should be sized to provide adequate stability and control for the airplane's entire CG range throughout the flight envelope. Finally, it is essential to have sufficient elevator control to perform stall at forward CG for all flaps down configurations. Such stalls establish the FAR stall speed which airplane take-off and landing performance. This paper deals with the process for tail wing design regarding the aircraft CG travel and results for 95-seat type turboprop aircraft.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.3 s.18
• /
• pp.149-156
• /
• 2004

In this study, vibration and aeroelastic analyses of a T-tail have been conducted. The structural dynamic computations of the T-tail are performed using MSC/NASTRAN and CFD-based computational aeroelastic analysis method is used to investigate the complex flutter phenomena. The results for vibration and aeroelastic analyses in the frequency and time domains are presented. It is importantly shown that the modal coupling of the torsional mode of vertical-wing and the asymmetric bending mode of horizontal-wing parts can give sensitive effects for the flutter stability of T-tail configurations.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.308-317
• /
• 2016

The tail flip of the decapod shrimp is a main feature in escaping behavior from the mesh of the codend in the trawl. The characteristics of tail flip in target prawn was observed and analyzed in a water tunnel in respect of flow condition and mesh penetration by a high speed video camera (500 fps). The tail bending angle or bending time in static water was significantly different than in flow water (0.7 m/s) and resultantly the angular velocity in static water was significantly higher than in flow water when carapace was fixed condition. When escaping through vertical traverse net panel in water flow the relative moving angle and relative passing angle to flow direction during tail flip, it significantly decreases the number of shrimps escaping than the case of blocking shrimp. The bending angles of tail flip between net blocking and passing through mesh were not significantly different while the bending time of shrimp passing through mesh was significantly longer than when shrimp blocking on the net. Accordingly the angular velocity of passing through mesh was significantly slower than blocking on the net although the angular velocity of the tail flip was not significantly related with carapace length. The main feature of tail flip for mesh penetration was considered as smaller diagonal direction as moving and passing angle in relation to net panel as right angle to flow direction rather than the angular velocity of tail flip.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.173-178
• /
• 2005

In this paper, an efficient and robust analysis system for the flutter optimization of laminated composite wings has been developed using the coupled computational method based on the genetic algorithm. General three-dimensional doublet-lattice method is efficiently used to compute generalized aerodynamic forces of T-tail configuration in the frequency domain. Structural dynamic analyses of laminated composite T-tail models are conducted using finite clement method. The classical P-k flutter analysis technique is applied to effectively solve the aeroelastic governing equations in the frequency domain. Optimum design studies using genetic algorithm have been conducted in order to obtain maximum flutter stability of a composite T-tail configuration. The results show that flutter stability can be significantly increased using composite materials with proper optimum design concepts even for the same weight and shape condition. In the view point of engineering design, it is also importantly shown that the optimization of the vertical wing part is highly effective comparing to the optimization of horizontal wing part.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.45-51
• /
• 2003

This paper presents a method to improve lateral stability of a four-seat canard aircraft, Velocity-173. Longitudinal stability of Velocity-173 is rather good, but lateral stability is relatively poor. A small panel which increases the area of vertical tail is designed and manufactured. In a design process, AAA(Advanced Aircraft Analysis) is used to predict the change in stability. Flight test is performed to validate the effect of a small panel attached under the vertical panel. Maximum likelihood estimation method is used to extract lateral controllability / stability derivatives from flight test data. This work validates the effect of a small panel attached under the vertical tail.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.173-179
• /
• 2017

This paper analyzes actuator characteristics for main wing and tail surfaces of an ornithopter by using a motion capture test. Experiments with the ornithopter are conducted indoor, and its fuselage is held on a jig to reduce interaction with vibration generated by flapping motion. The motion capture system detects the movement of markers attached on the main wing and tail wing tip. Experimental results show that the main wings tend to change its amplitude according to the flapping frequency, and the lift and thrust generation simulation is implemented by applying the experimental results and the ornithopter specification to Modified Strip Theory. Step input excitation is applied for experimental analysis of the tail wing in horizontal and vertical directions. As a result, horizontal and vertical tail wings have different characteristics in terms of overshoot, final value, damping ratio and natural frequency because they have different wing structures and linkages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.579-585
• /
• 2019

Increasing the detection probability of underwater targets necessitates securing the towing stability of the active towed SONAR. In this paper, to confirm the effects of tail wing fin on towing attitude and towing stability, two scale model experiments and one sea trials were conducted and the results were analyzed. The scale model tests measured the towing behavior of each of the tail fin shapes according to towing speed in a towing tank. The shape of the tail fin used in the scale model test was tested with an I-type tail fine and four Y-type tail fins, totaling five tail fins of the two kinds. The first scale model test confirmed that the Y-type tail fin was superior to the I-type tail fin in towing attitude and towing stability. The second scale model test confirmed the characteristics of the vertical tail fin height increase and the lower horizontal tail fin inclination angle application shape based on the Y-type tail fin. The shape of the application of the lower horizontal tail fin inclination angle showed the best performance. In order to verify the results of the scale model test, a full size model was constructed, sea trials were performed, and the towing attitude was measured. The results were similar to those of the scale model test.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.117-130
• /
• 2020

This study observes the case of Kakao-Page, a webtoon and web novel company, revealing the relationship between long-tail strategy and corporate competence in the cultural content industry market. This study investigated the various expansion strategies of Kakao-Page and investigated the strength of the strategy through value, rare, inimitability, and organization the method of VRIO analysis. The biggest strength of Kakao-Page is its diverse range of products ranging from 66,000, and not only does it gain merit as a long-tail, but it also becomes the core of the vertical integration and various expansion strategy. The study points out that the ability to secure a wide range of products is essential for platform content companies seeking access to the market. Also, the need for follow-up research regarding content platforms and long-tail.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.521-523
• /
• 2004

The Japan Aerospace Exploration Agency (JAXA) has proposed new vertical take-off and landing (VTOL) aircraft known as the Jet-VTOL aircraft shown in Fig.1. The Jet-VTOL aircraft is based on a canard wing configuration. The aircraft has the clustered lift-fans mounted near the center of gravity for vertical flight, and has the clustered fans mounted beside the vertical tail for cruise flight. Both fans are driven by the core engine mounted inside the aft end of fuselage. The propulsion system is innovative and attractive not to be seen even in the world.