• 한국정보전자통신기술학회논문지
• /
• 제2권1호
• /
• pp.29-35
• /
• 2009

본 논문에서는 차량의 후면에서 촬영한 영상을 이용하여 효과적으로 번호판을 추출하고, 그 안에 표기된 문자를 인식하는 방법을 제안한다. 기존의 연구방법은 전체영상에 대하여 전처리를 수행하여 에지(edge)영상을 구하여 이진화 한다. 이진화된 영상에서 허프(Hough)변환을 수행하여 수평, 수직선을 구하고, 번호판의 특징을 이용하여 번호판 영역을 추출한다. 이 방법의 문제점은 처리시간이 많이 소요되므로 실시간처리가 곤란하다는 점과 야간관 같이 명암상태가 불규칙하고 영상에서 번호판 테두리가 나타나지 않으면 번호판 영역추출을 할 수 없다는 점이다. 또한 차량의 후면에서 촬영한 영상에서 번호판 영역의 명암값 변화의 특성을 이용하여 번호판 영역에서 숫자폭, 배경영역과 숫자영역의 명암차를 조사하여 숫자영역임을 확인하고, 확인된 숫자와 숫자사이의 거리를 조사하여 번호판 영역을 추출한다. 본 연구는 기존방법의 번호판 테두리 훼손에 따른 번호판 영역추출 실패의 문제점을 해결하고 시간 소요의 문제를 실시간안에 처리 함으로써 실용적 응용이 가능하다. 실험 결과 100장의 샘플영상으로 실험한 결과 멀리 있는 자동차 영상에서도 자동으로 번호판을 판독할 수 있었으며, 번호판 추출에 실패한 영상은 13%를 나타내었고, 문자인식에 실패한 영상은 0.4%의 결과를 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• 제6권2호
• /
• pp.110-115
• /
• 1996

Yellow mutants of the astaxanthin producing red yeast Phaffia rhodozyma were obtained by nitrosoguanidine mutagenesis. The carotenoid composition of the yelow mutants, Yan-1 and Ny-1, was mainly $\beta$ -carotene (> 95$%$) and torulene (< 5$$). Therefore, the yellow mutants are carotene oxygenation deficient mutants (CODMs). CODMs produced decreased quantities of carotenoids compared to their red parents and this indicated that carotene may regulate its synthesis. CODMs, Yan-1 and Ny-4, on plates containing 50 $\mu$ M antimycin, showed highly pigmented vertical papillae. Antimycin-induced mutants purified from the papillae showed increases in carotenoid content (up to 1 mg $\beta$-carotene/g yeast). CODMs, Yan-1 and Ay-1, were more sensitive to antimycin than red strains, Ant-1 and 67-385. This was probably due to lower antioxidant activity of $\beta$-carotene than that of astaxanthin. Light increased torulene and light+antimycin further increased the torulene. Yan-1 and Ny-4 could grow with succinate, though their red parents, Ant-1 and Anf-1p, could not. However, antimycin induced mutation of Yan-1 or Ny-4 destroyed the ability to grow with succinate.

• 한국소음진동공학회논문집
• /
• 제23권6호
• /
• pp.502-511
• /
• 2013

Noise performance of small wind turbines is critical since these are generally installed near the community. In this study, flow noise characteristics of Savonius wind turbines are numerically investigated. Flow field around the turbine are computed by solving unsteady RANS equation using CFD techniques and the radiated noise are predicted by applying acoustic analogy to the computed flow data. Parametric study is then carried out to investigate the effects of operating conditions and geometric design factors of the Savonius wind turbine. Tonal noise components with higher harmonic frequency than the BPF are identified in the predicted noise spectra from a Savonius wind turbine. The end-plates and helical blades are shown to reduce overall noise levels. These results can be used to design low-noise Savonius wind turbines.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.202-206
• /
• 2001

The characteristics of heat transfer on the fire clay with microwave heating are numerically investigated using finite element method. The modelled regular hexahedron chamber($50cm{\times}50cm{\times}50cm$) filled with air consists of vertical heat source and sink walls, a fire clay model, and adiabatic plates at the top and bottom walls. With different geometrical aspect ratios of the fire clay model, the heat energy distribution is throughly investigated. The optimal shape of the fire clay for given chamber geometry and microwave power is analyzed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.135-140
• /
• 2001

A post-tensioned reinforced concrete slab bridge is analyzed by specially orthotropic laminate theory. Symmetrically reinforced slab with tension and compression steel is considered for convenience of analysis. Each longitudinal and transverse steel layer is regarded as a lamina, and material constants of each lamina is calculated by the use of the rule of mixture. This bridge is under uniformly distributed vertical loads, and axial loads and end moments due to post-tensioning. In this paper, finite difference method is used for numerical analysis of this bridge. Theory and analysis method of specially orthotropic laminate plates used in this paper can be used for design of new bridges, and maintenance and repair of old bridges.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.141-146
• /
• 2001

A post-tensioned steel plate girder bridge with cross-beams is analyzed by specially orthotropic laminate theory. The cross-sections of both girders and cross-beams are WF types. The result is compared with that of the beam theory. This bridge with simple support is under uniformly distributed vertical load, and axial loads and moment due to post-tension. In this paper, finite difference method for numerical analysis of simple supported bridge is developed. Relatively exact solution is obtained even with small number of meshes. Theory and analysis method of specially orthotropic laminate plates used in this paper can be used in design of new bridges, and maintenance and repair of old bridges.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.648-651
• /
• 2003

In this paper, we propose the recognition system of a license plate using SOM algorithm. The recognition of license plate was investigated by means of the SOM algorithm. The morphological information of horizontal and vertical edges was used to extract a plate region from a car image. In addition, the 4-direction contour tracking algorithm was applied to extract the specific area, which includes characters from an extracted plate area. Therefore, we proposed how to extract license plate region using morphological information and how to recognize the character string using SOM algorithm. In this paper, 50 car images were tested. The extraction rate obtained by the proposed extraction method showed better results than that from the color information of RGB and HSI, respectively. And the license plate recognition using SOM algorithm was very efficient.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.31-38
• /
• 2003

Line heating is an effective and economical process for forming flat metal plates into three-dimensional shapes for plating of ships. Because the nature of the line heating process is a transient thermal process, followed by a thermo elastic plastic stress field, predicting deformed shapes of plate is very difficult and complex problem. In this paper, neural network model o3r solving the inverse problem of metal forming is proposed. The backpropagation neural network systems for determining line-heating positions from object shape of plate are reported in this paper. Two cases of the network are constructed-the first case has 18 lines which have different positions and directions and the second case has 10 parallel heating lines. The input data are vertical displacements of plate and the output data are selected heating lines. The train sets of neural network are obtained by using an analytical solution that predicts plate deformations in line heating process. This method shows the feasibility that the neural network can be used to determine the heating-line positions in line heating process.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.819-822
• /
• 2006

This paper has the objects of deciding dynamic instability regions of thick plates on inhomogeneous Pasternak foundation by finite element method and providing kinematic design data for mats and slabs of building structures. In this paper, dynamic stability analysis of tapered opening thick plate is done by use of Serendipity finite element with 8 nodes considering shearing strain of plate. To verify this finite element method, buckling stress and natural frequencies of thick pate with or without in-plane stress are compared with existing solutions. The results are as follow that this finite element solutions with $4{\times}4$ meshes are shown the error of maximum 0.56% about existing solutions, and the larger foundation parameters, the farther dynamic instability regions are from vertical axis of graph presented relation of ${\beta}\;and\;\overline{\omega}/\omega$.

• 한국소음진동공학회논문집
• /
• 제11권5호
• /
• pp.131-139
• /
• 2001

In this paper, aerials gas pipeline vibrations due to the passing of vehicles have been measured, and peak values and characteristics of vibration were analyzed. In order to develop isolation system for gas pipeline, six cases with various support condition and hanging method were tested. The hanger used instead of wore rope isolated almost all vibrations transmitted from main beam. In the results of test, we could decrease response of vibration velocity from 49 % to 56 % and response of vertical vibration acceleration from 49 % to 60 %, because hanger instead of wire rope was used and rubber pads instead of wooden shield plates at support positions for Proofing horizontal vibration were used.