• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.85-98
• /
• 2010

An advanced and proactive response mechanism against diverse attacks on All-IP network should be proposed for enhancing its security and reliability on open network. There are two main research works related to this study. First one is the SPIE system with hash function on Bloom filter and second one is the Sinkhole routing mechanism using BGP protocol for verifying its transmission path. Therefore, advanced traceback and network management mechanism also should be necessary on All-IP network environments against DDoS attacks. In this study, we studied and proposed a new IP traceback mechanism on All-IP network environments based on existing SPIE and Sinkhole routing model when diverse DDoS attacks would be happen. Proposed mechanism has a Manager module for controlling the regional router with using packet monitoring and filtering mechanism to trace and find the attack packet's real transmission path. Proposed mechanism uses simplified and optimized memory for storing and memorizing the packet's hash value on bloom filter, with which we can find and determine the attacker's real location on open network. Additionally, proposed mechanism provides advanced packet aggregation and monitoring/control module based on existing Sinkhole routing method. Therefore, we can provide an optimized one in All-IP network by combining the strength on existing two mechanisms. And the traceback performance also can be enhanced compared with previously suggested mechanism.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.233-239
• /
• 2012

The harmonic frequency occurred in a power system causes errors and failures of equipments such as motors, and an unnecessary power consumption. The fundamental countermeasure for the harmonic frequency is to eliminate the cause of the harmonic frequency. This paper describes about making the device to figure out the cause in real time, verifying the operation of the device, and utilizing it to various power quality measurements. The power usually has the line frequency between 45Hz and 66Hz. In this research, the number of the harmonic frequencies which can be analysed inside the 2.8kHz bandwidth, the filter bandwidth of ADE7880, is 2800/f, and the maximum is 2800/45 = 63. The maximum order of the harmonic frequency in Korea, which has the line frequency of 60Hz, was measured as 2800/60 = 46th. Also, the accuracy of the voltage, current, and power measurement had the error within 0.1%, confirming that it is very precise.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.147-154
• /
• 2009

This paper presents a grating~integrated SPR (Surface Plasmon Resonance) sensor chip for simple and inexpensive biomolecule detection. The grating-integrated SPR sensor chip has two sensing channels having a nano grating for SPR coupling. An external mirror is used for multi channel SPR sensing. The present sensor chip replaces bulky and expensive optical components, such as fiber-optic switches or special shaped prisms, resulting in a simple and inexpensive wavelength modulated multi-channel SPR sensing system. We fabricate a SPR sensor chip integrated with 835 nm-pitch gratings by a micromolding technique to reduce the fabrication cost. In the experimental characterization, the refractive index sensitivity of each sensing channel is measured as $321.8{\pm}8.1nm$/RI and $514.3{\pm}8.lnm$/RI, respectively. 0.5uM of the target biomolecule (streptavidin) was detected by a $1.13{\pm}0.16nm$ shift of the SPR dip in the 10%-biotinylated sample channel, while the SPR dip in the reference channel for environmental perturbation monitoring remained at the same position. From the experimental results, multi-channel biomolecule detection capability of the present grating-integrated SPR sensor chip has been verified. On the basis of the preliminary experiments, we successfully measured the binding reaction rate for the $2\;nM{\sim}200\;nM$ monoclonal-antibiotin, thus verifying biomolecule concentration detectability of the present SPR sensor chip. The binding reaction rates measured from the present SPR sensor chip agredd well with those from a commercialized SPR sensor.

• Fashion & Textile Research Journal
• /
• v.16 no.5
• /
• pp.706-718
• /
• 2014

Ideology which symbolizes the belief system about the order of human society represents itself in a concrete form through dress which reflects material and conceptual world. In the early 1960s Korea, where a civil revolution and a military coup took place, good examples of dress representing ideology could be found. This study investigates the dress representing ideology of the period, and examines its manifestation and aspect of transition. Literature survey and case study were conducted. The following results were obtained: First, dress representing ideology was symbolically verifying its differences and was changing with the course of time. There were the flow going down from the government, and the flow going up from the movement of the civilian. Through this process, design elements of ideological dress were combined in a dialectic way to form a new representational dress such as Jaegunbok. Second, costly and luxurious clothes meant a tool to rule over people, and the opposition was uniform meaning equality. In 1960 Korea, black waves of school uniforms appeared to lead the social change. A year later, the military government seized power in a 5.16 coup and it enforced uniform upon every people to achieve equal austerity and modernized spirit. Lastly, cotton, which was originated from Gandhi's movement in India, was symbolizing nationalism till the early 1960s in Korea meaning the funding own development with own resources.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.376-390
• /
• 2013

The purpose of this study are as follows : First, This study conceptually and artificially defines concepts of OCB, absorptive capacity, IT group-efficacy, and TTF. Second, this study confirms the relationship among the KMS performance, the result of using KMS, and the result drawn from OCB, absorptive capacity, group-efficacy, and TTF by the preceding researches, suggesting the research model and verifying through empirical study. Lastly, this study suggests the practical and strategic advices to the groups wanting to get on the edge through KMS. The results of data analysis showed that TTF was found to have a positive influence on KMS performance. IT group-efficacy and absorptive capacity were also found to have a positive effect on TTF. And IT group-efficacy was found to have a positive influence on OCB. The findings are discussed and further research topics are suggested as well.

• Journal of Labour Economics
• /
• v.43 no.3
• /
• pp.101-121
• /
• 2020

The purpose of this study, reflecting the characteristics of recent R&D activities, where knowledge convergence and exchange and the growth of researchers are becoming more important, is to promote the growth of outstanding researchers by establishing a support system for researcher career development (intensifying expertise) and career fluidity (change in core research topics). Using the results of a survey of 548 researchers from government-funded research institutes, this study analyze environmental factors of research that promotes career development suitable for the growth of researchers after quantitatively verifying the effects of career development and career mobility on research outcomes. As a result of the analysis, it is more desirable to strengthen career liquidity after stable career development, but the human resources and career development support systems of research institutes are insufficient. Therefore, in this study, policy measures to support researcher career development and liquidity were proposed in four stages.

• Journal of Korea Multimedia Society
• /
• v.15 no.8
• /
• pp.1048-1058
• /
• 2012

This paper proposes the DDMPF(Distributed Data Management Protocol using FAT) which prevents data loss and keeps the security of self-organized storages by comprising a client, a storage server, and a verification server in clouding environment. The DDMPF builds a self-organized storage server, solves data loss by decentralizing the partitioned data in it in contrast to the centralized problem and the data loss caused by the storage server problems of existing clouding storages, and improves the efficiency of distributed data management with FAT(File Allocation Table). And, the DDMPF improves the reliability of data by a verification server's verifying the data integrity of a storage server, and strengthens the security in double encryption with a client's private key and the system's master key using EC-DH algorithm. Additionally, the DDMPF limits the number of verification servers and detects the flooding attack by setting the TS(Time Stamp) for a verification request message and the replay attack by using the nonce value generated newly, whenever the verification is requested.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.63-71
• /
• 2015

Lean six sigma has to be utilized considering irrational system or defects based on features of organization beforehand. Otherwise, it won't improve anything but burden another heavy responsibilities to the people in charge. Therefore, a survey was conducted in addition to a literature review and a case study about lean six sigma to verify effective deployment method for lean 6sigma tools. The survey was conducted across for 96 interviewees who have MBB or BB was selected from 15 companies which have been running six sigma projects over 10 years and SPSS 16.0 was used for verifying reliability and validity of the research. In conclusion, some issues occurred in the process of six sigma projects were identified and effective deployment method of lean six sigma tools by integrating lean manufacturing into 6sigma were suggested based on those issues.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.335-335
• /
• 2011

토양유실은 농업환경지표를 비롯한 국제 규범에서 농업에 의한 환경오염의 핵심문제로 제기되고 있다. 이러한 토양유실의 문제점을 해결하기 위해 USLE를 기반으로 한 SATEEC모형을 사용하여 토양유실량 및 유사량을 산정하였다. SATEEC모형은 USLE입력자료와 DEM을 이용하여 산정된 토양유실량 과 GA-SDR모듈을 통해 산정된 유달률(Sediment Delivery Ratio, SDR)을 통하여 최종유출구에서의 유사량을 산정한다. 많은 연구자들은 최종유출구에서의 유사량을 실측유사량과 비교하여 비슷하게 모의되면 유역의 특성을 잘 반영한다고 판단하므로 SATEEC모형의 단점인 토양유실량이 과하게 산정되는 문제점을 중요하게 생각하지 않는다. 하지만 SATEEC 모형의 결과값인 유사량의 신뢰도를 향상시키기 위해서는 토양유실량 검증을 통한 정확한 입력자료 구축이 필요하다. 따라서 본 연구에서는 여러개의 토양유실량 시나리오를 만들어 이에 따른 SATEEC 모형의 유사량을 비교/평가하고, 이를 이용하여 토양유실량의 검증이 필요함을 제시하고자 한다. 본 연구에서 사용한 토양유실량 시나리오는 총 4개로써, 시나리오 1은 SATEEC모형을 이용하여 산정된 토양유실량이며, 시나리오2~4는 ArcGIS를 사용하여 기존의 토양유실량 값에 ${\pm}0.25$의 범위를 주어 새롭게 산정된 토양유실량으로 SATEEC모형을 이용한 유사량 산정시 입력자료로 활용하였다. 그 결과 SATEEC모형을 이용하여 산정된 토양유실량은 시나리오별로 차이를 보였다. 또한 SATEEC GA-SDR모듈을 통해 예측된 토양유실량 값과 실측유사량을 이용하여 유달률을 산정하였으며 유달률도 토양유실량 시나리오별로 차이를 보였다. 따라서 SATEEC모형을 이용하여 최종유출구에서의 유사량 산정 결과 토양유실량의 차이에도 불구하고 유사량은 거의 비슷한 값을 나타내고 있으며, 최종유출구에서의 모의된 예측 유사량이 실측유사량과 비교 시 R2=0.688, EI=0.643 정도로 실측유사량과 비슷한 경향을 나타냈다. 따라서 SATEEC모형을 이용하여 유사량 산정시 먼저 문헌을 통한 토양유실량 검증이 필요하리라 판단되며, 문헌을 통해 토양유실량 검증 후 정확한 입력자료를 구축하여 유역에서의 유사량 저감을 위한 최적관리 기법 분석에 사용할 수 있도록 프로세서를 구축해야 할 것이라 판단된다.

• Journal of KIISE:Software and Applications
• /
• v.35 no.7
• /
• pp.442-451
• /
• 2008

Most plagiarism detection systems evaluate the similarity of source codes and detect plagiarized program pairs. If we use the source codes in plagiarism detection, the source code security can be a significant problem. Plagiarism detection based on target code can be used for protecting the security of source codes. In this paper, we propose a new plagiarism detection technique for Java programs using bytecodes without referring their source codes. The plagiarism detection procedure using bytecode consists of two major steps. First, we generate the token sequences from the Java class file by analyzing the code area of methods. Then, we evaluate the similarity between token sequences using the adaptive local alignment. According to the experimental results, we can find the distributions of similarities of the source codes and that of bytecodes are very similar. Also, the correlation between the similarities of source code pairs and those of bytecode pairs is high enough for typical test data. The plagiarism detection system using bytecode can be used as a preliminary verifying tool before detecting the plagiarism by source code comparison.