• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.3
• /
• pp.355-362
• /
• 2015

Test procedure for the design verification of wind turbine pitch and yaw bearings has been developed. Test items were selected to evaluate operational reliability of pitch and yaw bearings by considering loading and operational conditions, and by analyzing the design criteria of pitch and yaw bearings. The developed test items consisted of preliminary test, fatigue load test, extreme load test, low temperature environmental test and dismantling inspection after all the test were completed. Because it reflects the actual operational conditions of the pitch and yaw bearings, the developed test procedure has high reliability and can verify the basic design considerations in the international standard and guidelines.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.65-68
• /
• 2013

A photovoltaic array exhibits several local and single global maximum power points under partial shading conditions. To track the global maximum power point precisely, a novel global maximum power point tracking scheme is proposed in this paper. In the proposed scheme, robustness of the tracking performance has been improved by enhancing searching profile. In addition, the paper addresses the tracking failure condition, and provides the experimental verification with several simulation and experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.68-75
• /
• 2005

This paper presents a new method for the optimization of feed rate in sculptured surface machining. A NC verification model based on Z-map was utilized to obtain chip load according to feed per tooth. This optimization method can regenerate a new NC program with respect to the commanded cutting conditions and the NC program that was generated from CAM system. The regenerated NC program has not only the same data of the ex-NC program but also the updated feed rate in every block. The new NC data can reduce the cutting time and produce precision products with almost even chip load to the feed per tooth. This method can also reduce tool chipping and make constant tool wear.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.74-79
• /
• 2002

The piping verification tests were performed in order to verify the structural integrity during initial operation of the reactor coolant systems and the primary heat transportation systems of nuclear power plants by KEPRI in Korea. The tests were conducted at full operating temperature and pressure. The objective is to evaluate the possibility of excessive load generating on piping, piping supports, and reactor structures etc. in the steady normal operation and expected pump transient conditions. As a result, the measured vibrations have been shown acceptable level according to ASME/ANSI OMa-Standard, Part 3.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.86-92
• /
• 2002

This paper presents a new model of NC verification in NC milling using z-map. The model can describe the motion of machine tool like a real machine effectively. The model uses x, y, and z directional feed rate as well as cutting data for modeling Z-map of workpiece. The model verifies the over-cut, the under-cut and the surface topography using NC codes and cutting conditions. To investigate the performance of the model, simulation study was carried out. As the results, the model gave the geometry accuracy of workpiece, the surface topography, and the chip loads.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.315.1-315
• /
• 2002

The piping verification tests were performed in order to verify the structural integrity during initial operation of the reactor coolant systems and the primary heat transportation systems of nuclear power plants by KEPRI in Korea. The tests were conducted at full operating temperature and pressure. The objective is to evaluate the possibility of excessive load generating on piping, piping supports, and reactor structures etc. in the steady normal operation and expected pump transient conditions. (omitted)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1555-1562
• /
• 1995

This study represents the non-dimensional cutting force model. With the non-dimensional cutting force model it is possible to estimate efficiently the maximum cutting force during one revolution of cutter. Using the non-dimensional cutting force model, the feed rate and spindle speed are adjusted so as to satisfy the maximum cutting force and maximum machining error. To verify the accuracy and efficiency of the non-dimensional cutting force model, a series of experiments were conducted, and experimental results proved and verified the non-dimensional cutting force model. The NC toolpath verification system developed in this paper uses the non-dimensional cutting force model, so that it is effective for calculating the cutting force and adjusting the cutting conditions.

• The Journal of the Korean life insurance medical association
• /
• v.26
• /
• pp.41-53
• /
• 2007

In the course of insurance claim administration, medical experts' opinions are called medical claim reviews. They are classified into two main categories: medical verification and counsel for claim staff. Medical verification compare between product coverage and the insured's physical condition. Medical counsel for claim staff is advice for claim staff when they have a question about medical knowledge to make a claim decision. A common example of medical verification is insurance coding of pituitary apoplexy. Some clinicians have insisted that the ICD coding of pituitary apoplexy is l63 of cerebral infarction, but the exclusion criteria of I code show that neoplasm is coded as C00 to D48. Thus, pituitary apoplexy must be coded as D33. An example of medical counsel for claim staff is interpretation of some medical conditions. It is divided into UCR(usual, customary, and reasonable) assessment, assessment of causality, and so on. Disability evaluation is another subject of medical counsel for claim staff. The final claim decision must be made by claim staff because only the claim staff have the authority of claim decision. Medical claims review is only an expert's opinion.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.2
• /
• pp.128-134
• /
• 2004

In order to verify and take measures against a variety of troubles which cannot be predicted in a well-controlled laboratory, it is necessary that solar system should be experimented in an actual situation during a long period. Through this experiment it can be also understood how the load pattern and operational conditions expected in a design process become different to those in the actual running, which can be applied to a new system design. We installed 6 kW solar hot water heating system with a shower facility and operated during 7 months. As a result, average 8.3 persons took a shower a day； solar fraction is 71％ and total collector efficiency is 40％ during the periods from March to September. We confirmed several troubles encountered in the actual situation and considered practical center-measures.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.6
• /
• pp.964-973
• /
• 1997

A tidal prism eutrophication model, an one-dimensional intertidal model, is developed to study water quality conditions at small coastal basins and tidal creeks. The model simulates the physical transport processes using the concept of tidal flushing. The concept is simple and straightforward, and thus is ideal for small coastal basins with complex geometry. The model, having twenty-four state variables in the water column, simulates salinity, temperature, dissolved oxygen, three algal groups, and the cycles of carbon, nitrogen, phosphorus and silica. The model is applied to the Lynnhaven Bay, a small coastal basin of Chesapeake Bay in U.S.A. The model is calibrated using the field data collected in 1994, and then is verified using the independently collected data in 1980. The model overall gives a good reproduction of the field data, partly owing to the data collected from the field surveys specifically designed for the model application. This paper presents the procedure, and the results of the model calibration and verification.