Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Chip Load Control Using a NC Verification Model Based on Z-Map

Z-map 기반 가공 검증모델을 이용한 칩부하 제어기

  • Published : 2005.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a new method for the optimization of feed rate in sculptured surface machining. A NC verification model based on Z-map was utilized to obtain chip load according to feed per tooth. This optimization method can regenerate a new NC program with respect to the commanded cutting conditions and the NC program that was generated from CAM system. The regenerated NC program has not only the same data of the ex-NC program but also the updated feed rate in every block. The new NC data can reduce the cutting time and produce precision products with almost even chip load to the feed per tooth. This method can also reduce tool chipping and make constant tool wear.

Keywords

References

  1. Bergs, T., Rodriguez, C., Altan, T. and Altintas, Y., 'Tool path optimization for finish milling of die and mold surfaces - software development,' Transactions of NAMRI/SME, Vol.24, pp.81-86, 1996
  2. Lee, G. W., Rho, S. D., Shin, D. M., Han, H. S., 'NC Code Post-Processor Considering Metal Removal Rate,' J. of KSPE, Vol. 17, No. 5, pp. 116-123, 2000
  3. Bae, D. W., Ko, T. J., Kim, H. S., 'Development of a virtual machining system by a CAD model based cutting simulation,' J. of KSMTE, Vol. 8, No. 3, pp.83-91, 1999
  4. Kim, K. M., Cho, P. J., Kim, B. H., Chu, J. N., 'The study on the cutting force prediction in the ball end milling process at the random cutting area using Z-map,' Proc. of KSPE spring meeting, Vol. 1, pp. 125-129, 1996
  5. Baek, D. K., Ko, T. J., Kim, H. S., 'Machining Verification Model Considering Feed Rate for Virtual Milling,' J. of KSPE, Vol. 19, No. 12, pp.86-92, 2002
  6. FANUC LTD, Parameter manual - Fanuc Series 180-Model C , pp. 72-89, 1995