• Journal of the Korea Safety Management & Science
• /
• v.26 no.3
• /
• pp.93-100
• /
• 2024

Outdoor storage fires have a significant impact on the surrounding environment, including adjacent storage facilities and buildings. Therefore, it is essential to review and manage the fire impact to minimize damage to human life and property on the outdoor storage fires. In this study, the heat release rate and radiant heat flux were simulated according to the fire time, wind veolcity, and presence or absence of water spray equipment in an outdoor storage facility fire, and the fire impact was analyzed. The outdoor storage was designed to simulate two scenarios on the outdoor storage fires containing gasoline, and FDS was used for fire simulation. As a results, when the water spray facility was not operating and the wind velocity was 5 m/s, the maximum radiant heat flux was 24.80 kW/m2, which exceeded the limit radiant heat flux of 20 kW/m2. When the water spray facility was operating and the wind veolcity was 10 m/s, the maximum radiant heat flux was 18.77 kW/m2, which did not exceed the limit radiant heat flux, indicating that the fire impact on adjacent storage facilities was relatively small.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.507-510
• /
• 2008

Characteristics of an autothermal reformer at various operating parameters have been studied in this paper. Numerical method has been used, and simulation model has been developed for the analysis. Full Combustion reaction, Steam Reforming(SR) reaction, Water-Gas Shift(WGS) reaction, and Direct Steam Reforming(DSR) reaction are assumed as dominant chemical reactions in the autothermal reformer. Simulation results are compared with experimental results for code validation. Operating parameters of the autothermal reformer are inlet temperature, Oxygen to Carbon Ratio(OCR), Steam to Carbon Ratio(SCR), and Gas Hourly Space Veolcity(GHSV). SR reaction rate decreases with low inlet temperature. If OCR is increased, $H_2$ yield is increased but optimal point is suggested. WGS reaction is activated with high SCR. When GHSV is increased, reforming efficiency is increased but pressure drop may decrease the system efficiency.

• Transactions of Materials Processing
• /
• v.7 no.2
• /
• pp.177-185
• /
• 1998

The kinematically admissible veolcity field is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric plane dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric lane dies is caused by the eccentricity of plane dies. The axial velocity distribution in the plane dies is divided in to the uniform velocity and the deviated velocity. The deviated velocity is linearly changed with the distance from the center of cross-section of the workpiece. The results show that the curvature of products and the shapes of the dead metal one are determined by the minimization of the plastic work and that the curvature of the extruded products increase with the eccentricity.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.01a
• /
• pp.59-60
• /
• 2012

자유 낙하하는 물체가 받는 힘은 중력 뿐이다. 우리는 중력만을 받아서 운동하는 것을 자유 낙하 운동이라고 하고 자유 낙하하는 물체를 자유낙체라 한다. 다시 말해서, 물체의 초기 운동 상태와 무관하게 중력의 영향으로만 자유롭게 낙하하는 물체를 말하는 것이다. 본 논문에서는 공기의 저항을 무시하고, 수직방향으로 짧은 거리의 범위 내에서 고도에 의한 자유낙하 가속도의 변화가 없다는 가정을 하고, 자동차가 수직 상 방향으로 출발하여 도약하고 최고점에 도달하는 시간, 최대높이, 자동차가 출발 위치로 돌아오는 시간과 자동차의 속도, 자동차가 땅에 떨어질 때의 시간 및 속도에 대해 알 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.135-136
• /
• 2011

자유낙체란 자유로이 낙하하는 물체를 말한다. 즉 물체의 초기 운동 상태와 무관하게 중력의 영향으로만 자유롭게 낙하하는 물체를 말하는 것이다. 본 논문에서는 공기의 저항을 무시하고, 수직방향으로 짧은 거리의 범위 내에서 고도에 의한 자유낙하 가속도의 변화가 없다고 가정한다. 이러한 가정 하에, 자동차가 수직 상 방향으로 출발하여 최고점에 도달하는 시간, 최대높이, 자동차가 출발 위치로 돌아오는 시간과 자동차의 속도, 자동차가 땅에 떨어질 때의 시간 및 속도에 대하여 알아본다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.883-888
• /
• 2011

Laparoscopic surgery is being used in various surgical fields because it minimizes scarring. Laparoscopic operations require practical hand skills, so surgeons train on animals and via surgery training tool sets. However, these tool sets do not give the surgeon the sensation of touching real organs. A recently developed laparoscope simulator has a high friction force along the translational axis and a high gravity force along the pitch axis, and therefore it does not permit the operator to control his or her hands delecately. In the paper, the friction force along the axes is auumed to depend on the veolcity, and the gravity force on the angle and distance. We develop a compensation model that combines the gravity and friction force models.