• KIEAE Journal
• /
• 제5권3호
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.21-33
• /
• 2015

Recently, the Korean government announced a new development plan for a large-scale greenhouse complex in reclaimed lands. Wind environments of reclaimed land are entirely different from those of inland. Many standard books for ventilation design didn't include qualitative standard for natural ventilation. In this study, natural ventilation rates were analyzed to suggest standard for ventilation design of venlo type greenhouse built on reclaimed land. CFD (Computational Fluid Dynamics) simulation models were designed according to the number of spans, wind conditions and vent openings. The wind profile at a reclaimed land was designed using ESDU (Engineering Sciences Data Unit) code. Using the designed CFD simulation model, ventilation rates were computed using mass flow rate and tracer gas decay method. Additionally computed natural ventilation rates were evaluated by comparing with ventilation requirements. As a result of this study, ventilation rates were decreased with increasing of the number of spans. Ventilation rates were linearly increased with increasing of wind speed. When the wind speed was $1.0\;m{\cdot}s^{-1}$, only side vent was open and wind direction was $45^{\circ}$, homogeneity of ventilation rate at 0~1 m height is the worst. Finally, chart for computing natural ventilation rate was suggested. The chart was expected to be used for establishing standard of ventilation design.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.468-473
• /
• 2008

Currently, most of the buildings have been the high-rise buildings and not only the damage for people but also loose of property have been increased significantly. Furthermore, the damage for residents in indoor is increased significantly, the law related to fire protection is not established yet. We discussed safety of evacuation according to unitary system in standard apartment. At a result, when installing the smoke ventilation system, the RSET has been achieved and delay effect for reaching time of CO and smoke area has been obtained.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.731-736
• /
• 2008

There was in a building and with the technical advance for a energy saving the secret efficiency of the building improved together and continuously was come. The indoor air environment brought about the deterioration which is remarkable because of it. But time of most the indoor air environmental matter is one in the element which healthily affects biggest in the moderns who lives from the interior space. Today the plan for the air environmental maintenance which dwelling space is appropriate is demanded, is the actual condition where the method of the ventilation control which is energy saving and efficient is necessary. From the research which it sees, number of ventilation 0.7 time of the aeration which is a domestic legal baseline is excessive is judged from the research which sees, The sleep hour assumes it stays most long the hour when, number of ventilation 0 time 0.1 times 0.4 times $CO_2$ consistency measurements and analyzes number of ventilation conclusive escape. And $CO_2$ peak point control leads it decides a data, effective and it talks an energy saving circulation control method and it does to sleep.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.409-420
• /
• 2017

터널환기 계획시 소요환기량은 환기시설 용량을 결정하기 위한 중요한 인자이며, 소요환기량 산정을 위한 차종별 오염 물질 배출량(환기설계를 위한 기준배출량)은 현재 환경부에서 제시하는 '제작차 허용배출 기준'을 근거하여 산정하고 있다. 그러나, 2013년부터 환경부에서는 자동차에서 배출되는 오염물질을 산정하기 위한 규정으로 '자동차 총 오염물질 배출량 산정방법에 관한 규정'을 고시하고 이 규정에 '자동차 차종별 배출계수'를 제시하고 있다. 따라서 도로터널의 소요환기량 산정시 이를 적용하는 것에 대한 검토가 필요한 실정이다. 본 연구에서는 2015년 경유차량의 배출가스 조작사건 이후 자동차 배출가스 규제강화에 따라 터널의 소요환기량 산정에 미치는 영향을 검토하였으며, 최근 환경부에서 개정한 '제작차 허용배출량 기준'과 '자동차 차종별 배출계수'에 의한 소요환기량과 EURO 배출기준을 적용한 소요환기량을 비교 분석하였다. 또한 소요환기량 산정 근거에 따른 합리적인 환기시스템 용량결정을 위한 기초 설계자료를 제공하는 것을 목적으로 한다.

• 한국지리정보학회지
• /
• 제22권2호
• /
• pp.133-151
• /
• 2019

본 연구는 찬공기 특성을 유역단위로 분석하고, 유역 내 생성되는 찬공기를 도시 바람길 계획에서 활용하는 방안을 제안하는 것을 목적으로 한다. 이를 위해, 경기도 지역의 북쪽에 위치한 중랑천 유역의 의정부시, 남쪽에 위치한 안양천 유역 및 양재천 탄천 유역의 과천시를 연구 대상지로 선정하였다. 찬공기 특성 분석을 위해 독일에서 개발된 모형인 KALM(Kaltluftabflussmodell)을 활용하였으며, 야간 6시간 동안 생성되는 찬공기 흐름 및 찬공기층 높이를 파악하였다. 중랑천 유역의 주요 바람길이 흐르는 곳에 위치해 있는 의정부시는 남쪽 외곽에서부터 유입된 찬공기가 의정부시 전체 바람길 계획의 중요한 부분을 차지하고 있다. 또한, 서쪽의 사패산 일대에서 생성된 찬공기는 시청 인근의 중심상업지구까지 유입되고 있어 도심의 열환경을 조절하는 주요한 역할을 수행하는 것으로 판단된다. 반면, 의정부시 동쪽지역은 바람길 이용이 원활하지 않는 것으로 파악되었다. 동쪽의 관악산과 서쪽의 청계산 등에서 생성된 찬공기 흐름은 과천시의 북쪽 지역에서 가장 활발하였는데, 이 흐름은 안양천 및 양재천 탄천 유역 전체에서도 주요한 바람길이다. 이에 비해, 찬공기 흐름이 원활하지 않은 남쪽지역에 '과천지식정보타운 공공주택지구' 조성이 계획되어 있어 향후 이 지역의 주거환경이 저하될 가능성이 크다. 향후, 이 지역을 개발할 경우 상세한 바람길 분석을 통한 바람길 활용 계획을 추가적으로 수립할 것을 제안하였다.

• 한국태양에너지학회 논문집
• /
• 제40권2호
• /
• pp.25-36
• /
• 2020

The Korean government has a plan to mandate zero-energy buildings in 2020 for public and 2025 for private buildings. In order to design a zero-energy building, insulation and airtightness, which are the most basic elements of passive house technology, are required, and the government has been accomplished this through step-by-step strengthening of related standards. In passive house with high thermal insulation and airtightness performance, the heat introduced into the building through solar radiation can be stored for a long time to keep the inside warm during winter. On the other hand, during summer, heat introduced into the building cannot be easily released to outside, so it is necessary to actively block solar radiation and high temperature outdoor air to prevent an increase of indoor temperature. Therefore, this study aims to derive an appropriate operation condition of passive house to maintain the indoor temperature at an suitable level according to the ventilation methods and solar shading conditions. As a result, under the conditions that the outdoor temperature was 28℃ or less, the ventilation using a heat recovery ventilation system at daytime and natural ventilation at nighttime were selected for the most appropriate operation method. In addition, in the case of solar shading, it was found that blocking solar radiation at daytime using the blind and open the blind at nighttime to ensure natural ventilation were selected for the most appropriate solar shading condition.

• 대한건축학회논문집:계획계
• /
• 제36권1호
• /
• pp.27-36
• /
• 2020

Fifteen years after the modernization of traditional markets, commercial facilities and some 1,000 markets across the country contacted arcade operators, there are no specific guidelines on installation standards, exact guidelines for public facilities, and guidelines on law, maintenance and management yet. Therefore, it is necessary to derive a plan that reflects the mindset of the market project and the users as basic planning data for making arcade remodeling of traditional markets more advanced. As a research method, case studies and surveys were conducted and the details are as follows. Through the case study, this study drew suggestions that were available and needed in Korea on the planning plan of arcade space in the developed traditional market and conducted user preference. The survey participants are 150 users of Daegu seomun market. In addition, the survey contents are approached with the concept of remodeling remuneration, so the total number of questions is 47 including 'accessibility', 'comfort', 'openness', 'safety' and 'integrity', which are five elements of the arcade plan. The survey method assessed the importance and satisfaction of each questionnaire on a 5-point scale, and the survey results were compared with technical statistics and means using the SPSS statistics package. The results of user awareness and image survey, in which the installation and remodeling of the ventilation system of the crosshairs are mentioned in the event of fire or in the case of daily ventilation, are important factors in safety. The user-conscious survey, analyzed in 'integrity', indicates that the use of multi-purpose space is required, and that the layout of street stalls and parking and user movements should be integrated. Mac of this study is going to present direction of remodeling plan and behavior analysis by analyzing user preference data for advanced remodeling of arcade in traditional markets.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술논문발표회
• /
• pp.1-6
• /
• 2002

The study offer a suggestion that from result in being a case to efflorescence for decrease a plan: $\circled1$ A efflorescence of concreat a structure will be the prograss plan; In the materials, depress use to the water-sand in the construction, admonish unification of front and rear in the environment, consideration requisite concreat don't the occurrence efflorescence. $\circled2$ Ma sonry building efflorescence establish a ventilation opening and a waterway to ma sonry the times avoid the winter or the rainy season. Ma sonry building efflorescence will be make good among a brick to a brick interval closely mortar. $\circled3$ Tile building, tile of plasticity temperature is appropriate, reduce the deviation, parapet part of efflorescence will be make good closely mortar. A construction material part a meterial developing need Perfection of construction a efflorescence occurrence is the minimum, a plan Part developed so on, composition of a ommection field systematic effort need a efflorescence Prevention a kind of detail.

• 방사성폐기물학회지
• /
• 제5권1호
• /
• pp.65-78
• /
• 2007

지하 동굴식 처분장의 건설, 운영 및 중-저준위 방사성폐기물을 처분한 이후 발생하게 되는 오염물질(Rn, CH CO, HS, Radiolysis에 의한 방사능 가스 등)은 적절한 공기량을 필요로 한 곳에 정확히 분배시킬 수 있는 환기시스템에 의해 통제되도록 하여야한다. 특히 지하 처분장은 여러 개의 진입 터널, 저장 터널, 공기 유입-배기 터널, 수직갱 등으로 이루어진 복잡한 회로망의 형태로 나타나기 때문에 이에 적절한 기술적 접근이 필요하다. 본 논문에서는 이러한 환기시스템 구축을 위한 기술적 접근을 위해 미국의 WIPP (Waste Isolation Pilot Plant)처분장과 스웨덴의 SFR (Slutforvar for Reaktoravfall) 중-저준위 처분장을 모델로 하여 두 처분장의 소요환기량을 선정하고 설계상 통풍로의 단면적, 길이, 표면 거칠기 등을 고려한 환기회로를 구성하였으며, 수학적으로 계산되는 각 회로의 저항에 대해 기술하였다. 또한 이를 바탕으로 적절한 선풍기의 용량과 수직갱 운용방안을 설계하였다. 두 처분장의 지형상의 규모 및 환기시설 비교 결과, SFR 처분장에 비해 WIPP 처분장에서와 같이 병렬구조가 많을수록 처분장 전체의 저항이 감소되며 이러한 결과로 환기시스템의 운용비 절감효과를 얻을 수 있다는 결론을 얻었다. 따라서 처분용량 증대를 위한 대단면의 SFR 처분장 구조와 전체 저항 감소를 위한 WIPP 처분장의 병렬구조를 조합한 형태가 가장 합리적이며 효율적인 환기가 이루어질 수 있을 것으로 사료된다.