• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.647-649
• /
• 2000

Brushless DC motors are widely used in many industrial fields as an actuator of robot and driving power motors of electrical vehicle. In this paper adaptive fuzzy sliding mode scheme is developed for velocity control of brushless DC motor. The proposed scheme does not require an accurate dynamic model. yet it guarantees asymptotic trajectory tracking despite torque variations. Numerical simulation and DSP-based experimental works for velocity control of brushless DC motor are carried out.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.172-180
• /
• 2005

Image resampling according to epipolar geometry is an important prerequisite for a variety of photogrammetric tasks. Established procedures for resampling frame images according to epipolar geometry are not suitable for scenes captured by line cameras. In this paper, the mathematical model describing epipolar lines in scenes captured by line cameras moving with constant velocity and attitude is established and analyzed. The choice of this trajectory is motivated by the fact that many line cameras can be assumed to follow such a flight path during the short duration of a scene capture (especially when considering space-borne imaging platforms). Experimental results from synthetic along-track and across-track stereo-scenes are presented. For these scenes, the deviations of the resulting epipolar lines from straightness, as the camera's angular field of view decreases, are quantified and presented.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.132-139
• /
• 1989

Optical flow is important not only for determining velocity and trajectory of the object but also for image segmentation and 3D information. The gradient-based method is mostly used to compute optical flow form image sequences, but it accomanies smoothing effect of velocity vectors. In this paper, an enhanced algorithm for computing optical flow using scalar edge to restrict is also applied to reduce errors both around motion boundary and in the occlusion region.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.404-409
• /
• 2000

Characteristics of secondary vortices is topologically investigated in the near-wake region of a circular cylinder where the Taylor hypothesis does not hold. The three-dimensional flow fields in the wake-transition regime were measured by a time-resolved PIV. For the analysis in a moving frame of reference, the convection velocity of the Karman vortices is evaluated from the trajectory of vortex center which is defined as the centroid of the vorticity field. Then, a saddle point is obtained by applying the critical point theory. Science the distributions of fluctuating Reynolds stresses defined by triple-decomposition are closely related with the existence of secondary vortices. the physical meaning of them is explained in conjunction with vortex center and saddle point trajectories. Finally, the temporal evolution of streamwise vortex is also discussed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.6
• /
• pp.584-590
• /
• 1984

This study is to develop a program, with which the motion of the system can be simulated in view of kinematics and dynamics, and then evaluate functional capabilities of many robots in order to select the most suitable one for any given working conditions. According to the theory of Denavit & Hartenberg, rectangular coordinate is set at each joint in the robot of six joints, as this one is the major concern, and transformation matrices are derived between any two coordinates. The necessary displacement of each joint for executing a given a work is obtained from the position and posture transformation and the in-stantaneous velocity of the joint is got from given velocity distribution of the path. The necessary torque of each joint is finally calculated by Newton-Euler Method. This simulation program is applied to a robot with six rotational joints, Rotational angle and torque to time which has a given motion trajectory are figured and also torque to r.p.m.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.1-6
• /
• 1992

A principle of "orthogonalization" is proposed as an extended notion of hybrid (force and position) control for robot manipulators under geometric endpoint constraints. The principle realizes the hybrid control in a strict sense by letting position and velocity feedback signals be orthogonal in joint space to the contact force vector whose components are exerted at corresponding joints. This orthogonalization is executed via a projection matrix computed in real-time from a gradient of the equation of the surface in joint coordinates and hence both projected position and velocity feedback signals become perpendicular to the force vector that is normal to the surface at the contact point in joint space. To show the important role of the principle in control of robot manipulators, three basic problems are analyzed, the first is a hybrid trajectory tracking problem by means of a "modified hybrid computed torque method", the second is a model-based adaptive control problem for robot manipulators under geometric endpoint constraints, and the third is an iterative learning control problem. It is shown that the passivity of residual error dynamics of robots follows from the orthogonalization principle and it plays a crucial role in convergence properties of both positional and force error signals.force error signals.

• Journal of computational fluids engineering
• /
• v.19 no.2
• /
• pp.30-39
• /
• 2014

We report in this paper the analysis of the motion of a needle and a spring in a viscous fluid under the influence of gravitational force. Lateral shift as well as vertical motion of a needle falling in a viscous fluid has been observed from a simple experiment. We also observed the combined rotation and translation of a falling spring. The trajectory and velocity of the falling needle and the spring were obtained by using an image processing technique. We also conducted numerical simulation for both problems. For the falling-needle problem, we employed a theory; but it turns out that significant correction is required for the solutions to match the numerical and experimental data. For the falling spring problem various theoretical formula were tested for their justification, but none of the existing theories can successfully predict the numerical and experimental results.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.679-684
• /
• 2000

This paper presents the development of system and program for a Parallel-Typed CNC Machine. The system consists of parallel manipulator, PC (Personal Computer), DMC (DSP Motion Controller), and machining tools. In order to control the manipulator, the program, which is implemented in "c/c++" language, involves inverse/direct kinematics, velocity mapping, Jacobian and etc. A controller computes the kinematic formulation in real-time and generates and motion by the DMC. A monitor, which has access to program and sensory information, displays the status of manipulator.nipulator.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.630-638
• /
• 2011

A new smooth bore test barrel was developed to be used in sensitivity assessment test for explosives and fragment impact test. The bore diameter of the barrel is 20 mm, and the powder chamber is designed to be replaceable with the 12.7 mm, 20 mm and 30 mm type chamber. The test results showed the wide range of fragment velocity from 400 to 2000 m/s, included the fragment velocity requirement of the fragment impact test(alternate procedure #1) in MIL-STD-2105B. The stability of the bullet trajectory was checked by test shots and the structural safety of the system has been confirmed through the stress analysis and the interior ballistics analysis of the barrel.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.102-111
• /
• 2005

In this paper, we address a position control for a parallel stage, which is levitated and driven by electric magnetic force. This consists of a levitating object (called platen) with 4 permanent magnetic linear synchronous motors in parallel. Each motor generates vertical force for suspension against gravity and propulsion force horizontally as well. This stage can generate six degrees of freedom motion by the vertical and horizontal force. A dynamic equation of the stage system is derived based on Newton-Euler method and it's special Jacobian matrix describing a relation between the limited velocity and Cartesian velocity is done. There are proposed two control methods for positioning which are Cartesian space controller and Actuator space controller. The control performance of the Cartesian space controller is better than the Actuator space controller in task space trajectory while the Actuator space controller is simpler than the Cartesian space controller in controller realization.