• Journal of Magnetics
• /
• 제12권1호
• /
• pp.40-44
• /
• 2007

The Planar Hall effect in a spin valve structure has been applied as a biosensor being capable of detecting $Dynabeads^{(R)}$ M-280. The sensor performance was tested under the application of a DC magnetic field where the output signals were obtained from a nanovoltmeter. The sensor with the pattern size of $50{\times}100{\mu}m^2$ has produced high sensitivity; especially, the real-time profiles by using that sensor revealed significant performance at external applied magnetic field of around 7.0 Oe with the resolution of 0.04 beads per $\mu m^2$. Finally, a successful array including 24 patterns with the single sensor size of $3{\times}3{\mu}m^2$ has shown the uniform and stable signals for single magnetic bead detection. The comparison of this sensor signal with the others has proved feasibility for biosensor application. This, connecting with the advantages of more stable and high signal to noise of PHR sensor's behaviors, can be used to detect the biomolecules and provide a vehicle for detection and study of other molecular interaction.

• 대한교통학회지
• /
• 제35권2호
• /
• pp.116-128
• /
• 2017

교통사고는 운전자가 주변 차량 및 도로기하구조 상태 변화에 대한 인지부족과 적절한 회피 행동을 능동적으로 수행하지 못하는 경우에 순간적으로 발생하는 차량의 물리적 충돌사건으로 정의 될 수 있다. 따라서, 운전자가 도로를 주행하면서 만들어 내는 주변 환경과의 상호작용을 지속적으로 모니터링하고, 교통사고를 유발할 개연성이 높은 이벤트를 검지하는 것은 교통사고 예방을 위한 선결조건이다. 본 연구에서는 연속류 도로를 대상으로, GPS(Global Positioning System)-IMU(Inertial Measurement Unit), 카메라, 레이더, 라이다가 부착된 조사 차량을 이용하여 도로기하구조 및 교통환경 정보를 취득하였다. 취득된 정보를 가공하여 차량의 상호 작용 및 도로기하구조 특성을 고려한 주변차량과의 충돌 가능성여부를 평가할 수 있는 알고리즘을 개발하였다. 특히, 도로기하구조를 제한속도(직선부), 안전 속도(곡선부)로 구분하여 평가하고, 교통안전지표인 SDI를 이용하여 차량의 주행안전성을 평가하였다. 본 연구에서 개발한 방법론은 도래하는 자율주행시대에 차량의 센서로 부터 수집이 가능한 자료를 이용하여 안전성을 평가한다는 관점에서 향후 유용하게 활용 될 수 있을 것으로 기대된다.

• 화약ㆍ발파
• /
• 제38권4호
• /
• pp.26-36
• /
• 2020

지하공간의 이용범위 확장 및 활용이 증가함에 따라 테러리스트들에 의한 지하 내부 폭발의 발생 가능성이 증가하고 있다. 본 연구에서는 심도 50m의 심도에 굴착된 원형 터널을 모델링한 후, 터널의 내부에 폭발하중을 가하였다. 폭발하중은 ATF(Bureau of Alcohol, Tobacco, and Firearms)에서 제시하는 6종류의 운반용 차량에 대한 최대 폭약량의 폭발하중을 산정하였다. 원형 터널 주변 지반은 국내 터널 설계에서 제시하는 지보패턴에 따른 3종류의 암반등급을 선정하였다. 비선형 동적해석을 수행하여 폭발하중과 지반 특성을 매개변수로 지표 변위를 분석하여 지상 구조물의 영향에 대해 평가하였다. 해석결과, 1등급암에 대해서는 지반의 융기에 대한 영향을 고려해야 하며, 2등급암과 3등급암은 부등침하에 대한 영향을 고려해야 한다. 특히, 3등급암은 40m 이내의 지상 구조물에 대해서는 정밀 분석이 요구된다. 또한 지표 변위는 탄성계수에 의한 영향이 주요인인 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.4068-4076
• /
• 2013

열차가 주행할 때 발생하는 차륜-레일 상호작용력은 열차의 주행속도, 차량축중과 선형조건(곡선반경, 캔트) 등 여러 변수의 영향을 받는다. 구조물의 안정성을 확보하기 위해서는 증속이전에 각 변수별로 구조물에 대한 영향 평가가 필요하다. 최근 차세대고속철도사업으로 국내에서 개발된 HEMU 430-X는 지난 2013년 3월, 경부 2단계구간에서 최고 421.4km/h의 속도를 달성한 바 있다. 향후 호남고속선 Test-Bed 구간(오송기점 K.P 100-128km)에서 추가적인 증속주행시험을 하는 경우 동적효과 증가로 인한 동적하중증가와 원심하중에 의한 외측레일에 대한 궤도작용력에 대한 검토가 필요하다. 본 논문에서는 HEMU열차의 추진력, 실측주행저항과 호남고속선의 선로선형을 고려하여 TPS 분석을 수행하여 선로에서의 속도변화를 계산하였다. 그리고 HEMU 열차주행시 곡선구간에서의 원심하중과 충격계수를 고려한 궤도부담력을 평가하였다.

• 지역사회간호학회지
• /
• 제15권2호
• /
• pp.308-322
• /
• 2004

Purpose: 'The purpose of the present study was to understand students' experiences from their standpoint, to identify relevant variables and to examine into their relations by analyzing and describing what phenomenon 'nursing students' visiting ambulatory bathing service' is, what are the reasons for the phenomenon, and what interactions are in the phenomenon. Method: The subjects were thirteen students. Data were collected through in-depth interviews and analyzed by Strauss and Corbin's analysis method. Result: With regard to ambulatory bathing service, participants responded 'lack of education', 'inexperienced personal relations' and 'disappointment with recipients families'. They recognized 'burden' and 'compassion'. The intensity of generated 'burden' and 'compassion' was determined by volunteering persons, the degree of health care service, recipients' response and interaction of climate. When 'burden' and 'compassion' were generated, participants selected their own coping strategies. Strategies in the situation of 'burden' and 'compassion' were significantly influenced by 'burden' and 'compassion' and structural situation - 'mutual relation structure,' 'volunteers' capability,' 'the degree of volunteering guidance,' 'community participation,' 'recipients' environment,' 'information sharing,' 'special vehicle equipment' and 'economical burden.' Strategies include' service training,' 'receiving volunteering training,' 'preliminary service preparation,' 'volunteering.' 'connection to local medical center,' 'intention,' 'information sharing,' 'passive response to recipients' appreciation' and 'the understanding of publicity'. The results of selected 'burden' and 'compassion' are described with 'worthiness' and 'cohesion' as follows. Conclusion: This study is significantly meaningful in that it examined bathing service welfare in its initial stage. There are not much outcome from previous studies. However. it is meaningful that this study intended to develop theories on the nature of experiences and the relations among concepts derived from the visiting ambulatory bathing service process of nursing students. Professors who taught social volunteering in universities understood the experience of nursing students who did the visiting ambulatory bathing service. Consequently, professors will provide an effective instruction to enable these students to carry out visiting ambulatory bathing services efficiently in order to meet demands when they conduct the services. For the volunteering service activity in major-related fields among college students' social volunteering activities, they recognized the necessity of systematic education and preparation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.165-172
• /
• 2004

LE-7A is the main engine of the H-IIA launch vehicle. Under its development, the nozzle suffered from two troubles during startup and shutdown transients of the engine. One is a large side load, which damages the actuator of the nozzle, and the other is damage on regenerative cooling tubes due to high heat load. It has been considered that these problems are caused by a peculiar separation pattern called Restricted Shock Separation (RSS). RSS is observed in several rocket nozzles, for example, LE-7A nozzle, Vulcain nozzle and so on. Their contours are not conventional truncated perfect (TP) nozzle - LE-7A nozzle is a compressed truncated perfect (CTP) nozzle and Vulcain nozzle is a thrust optimized (TO) nozzle. Although it is believed that the occurrence of RSS is affected by the nozzle contour, the mechanisms are not clarified sufficiently yet. In the present paper, a parametric numerical study is carried out to investigate the mechanisms of the occurrence of RSS in CTP nozzles during startup transient. The results show that RSS is caused by the adverse pressure gradient downstream of the Mach disk. The adverse pressure gradient is caused by the interaction of the pressure wave and Mach disk. The method to avoid the occurrence of RSS is also examined. A small step inside the nozzle affects the position of the separation point and prevents RSS. The result shows that the possibility that RSS can be suppressed by controlling the position of the separation point.

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.328-335
• /
• 2012

Due to development of digital technology, a concept of stage design management is being changed. In addition, stage management technique is changing a viewpoint of the audience watching a stage through the convergence of analogue and digital technology. Three-dimensional media such as LED and hologram and works combining with previous stage performances are rising, and the audience's requirements about spectacles on the stage are increasingly higher. Interaction between a stage, audiences and actors is a communication tool by a work story and its direction. In other words, stage design should newly focus on not only concluded work story but also comprehensive delivery of direction and the expression and extreme delivery. Therefore, this study aims to examine how to combine analogue and digital direction elements in the stage design. To this end, this study looks into everything the audience feels through performances and analogue and digital elements directed for performances and then analyzes and arranges them to present a possibility of various types of work performances. Stage structure, set, and lighting that are analogue direction elements are the basis of stage performance. Analogue direction elements mean a media vehicle that can differentiate except for basic direction of each work. This study aims to analyze new performance culture when analog and digital direction elements are combined through stage performance and a possibility of new stage performance. In addition, through this it desired to seek for a development possibility of Korean leisure culture and art culture. As the work cases, this study shows 10 works through actual stage performances held in Korea and introduces elements directed in those works.

• 한국지반공학회논문집
• /
• 제37권7호
• /
• pp.35-42
• /
• 2021

본 연구에서는 다양한 카올리나이트 혼합비에 따른 카올리나이트-모래 혼합토의 특성을 실험적으로 분석하였다. 이를 위하여 기본물성실험과 다짐시험을 실시하고 그 결과를 분석하였으며, 카올리나이트와 모래입자 간의 상호 구조를 더욱 자세히 분석하기 위하여 현미경 사진을 이용한 관측을 추가적으로 수행하였다. 실험결과, 카올리나이트 혼합비가 증가할수록 비표면적의 증가에 따른 함수비의 증가 및 모래입자와의 강한 결합구조를 형성하는 것으로 나타났으며, 최대 건조밀도는 감소하고 초기간극비는 증가하는 것으로 나타났다. 현미경 사진 분석 결과, 세립분 함량의 증가에 따라 모래의 특성이 지배적인 비율, 중간 비율, 세립분의 특성이 지배적인 비율을 확인할 수 있었으며, 세립분의 함량이 25-40% 정도인 경우에 입자간 상호작용이 잘 이루어지는 것을 관측할 수 있었다.

• Geomechanics and Engineering
• /
• 제18권2호
• /
• pp.141-151
• /
• 2019

In this paper, it is aimed to present a detail investigation about the comparison of static and dynamic behavior of historical masonry arch bridges considering different arch curvature. $G{\ddot{o}}derni$ historical masonry two-span arch bridge which is located in Kulp town, Diyarbakir, Turkey is selected as a numerical application. The bridge takes part in bowless bridge group and built in large measures than the others. The restoration projects were approved and rehabilitation studies have still continued. Finite element model of the bridge is constituted with special software to determine the static and dynamic behavior. To demonstrate the arch curvature effect, the finite element model are reconstructed considering different arch curvature between 2.86 m-3.76 m for first arch and 2.64 m-3.54 m for second arch with the increment of 0.10 m, respectively. Dead and live vehicle loads are taken into account during static analyses. 1999 Kocaeli earthquake ground motion record is considered for time history analyses. The maximum displacements, principal stresses and elastic strains are compared with each other using contour diagrams. It is seen that the arch curvature has more influence on the structural response of historical masonry arch bridges. At the end of the study, it is seen that with the increasing of the arch heights, the maximum displacements, minimum principal stresses and minimum elastic strains have a decreasing trend in all analyses, in addition maximum principal stresses and maximum elastic strains have unchanging trend up to optimum geometry.