• Journal of the Korean Society of Hazard Mitigation
• /
• 제2권4호
• /
• pp.97-116
• /
• 2002

In this papers, a finite element formulation is proposed for dynamic analysis of vehicle-bridge interaction problems under realistic loading conditions. Although the formulation presented in this paper is based on the consideration of only a single traversing vehicle, it can be extended to include several different bridge configurations. The traversing vehicle and the vibrating bridge superstructure are considered as an integrated system. Hence, although material and geometric nonlinearities are excluded, this introduces nonlinearity into the problem. Various vehicle models, including those with suspension systems, are considered. Traveling speed of the vehicle can be varied. The finite element discretization of the bridge structure permits the inclusion of arbitrary geometrical configurations, and surface and boundary conditions. To obtain accurate solutions, time integration of the equation of vehicle-bridge motion is carried out by using the Newmark method in connection with a predictor-corrector algorithm.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1355-1362
• /
• 2022

Nuclear fuel, including its fresh state, must be handled safely due to its critical and hazardous nature. Under normal transport conditions, several interactions take place among different components, such as transport cask used for loading the nuclear fuel and tie-down structure to attach with the vehicle. To ensure structural integrity of the nuclear fuel, vibrations and impacts transmitted from the vehicle must be sufficiently reduced. Therefore, in this study, we conducted two transportation tests from Daejeon to Kijang in Korea to verify the vehicle-induced vibrational characteristics of the KJRR-F fresh nuclear fuel when transported under normal transport conditions. The speed and location of the vehicle were obtained via GPS, and the accelerations between the vehicle and the KJRR-F fresh nuclear fuel were measured. Additionally, using the acceleration results, a structural analysis was conducted to confirm the structural integrity of the nuclear fuel under the most severe conditions during normal transport.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제20권11호
• /
• pp.494-500
• /
• 2019

The purpose of this study was to determine a method to prevent damage during the transfer of loading through optimal design of loading transfer software for an ammunition-carrying armored vehicle. Typically, an ammunition carrier armored car is equipped with an automated charge transfer system. The load is intermittently damaged during the loading of the cargo, and this needs to be improved. The following improvements and verification tests were carried out. As impact speed increased, the loading speed was reduced 60%, and a special fixture utilizing a force gauge was developed and tested. If the maximum current of 11A for the servo controller is output when the load of the conveyor is generated by interference inside the loading tube, there is a possibility of charge breakage. If the maximum current is low, the load cannot be loaded. In the loading test for the ammunition carrier armored car with the actual charge, the improved design was found to be valid, as the load was not damaged and occurred nominally.

• Journal of Auto-vehicle Safety Association
• /
• 제7권2호
• /
• pp.32-38
• /
• 2015

A sine with dwell test is well known as a test scenario for evaluation of performance of electronic stability control(ESC) on passenger vehicles and heavy commercial vehicles. However, when it comes to ESC for medium commercial vehicles, the test scenario has not been established yet. In this paper, the sine with dwell test was modified considering characteristics of medium commercial vehicles. The three main modifications of the original test scenario are the steering angle level, steering frequency, and loading condition of the vehicle. These modifications are derived from simulation study for different medium commercial vehicles. From simulation study, it was shown that the ESC system for medium commercial vehicle is objectively evaluated by the proposed test scenario. A clear improvement on vehicle stability was seen in the results when ESC system was used.

• Journal of Auto-vehicle Safety Association
• /
• 제5권2호
• /
• pp.51-56
• /
• 2013

In vehicle's door wiring harness (W/H) system is more toward to arrange a passenger compartment than a hinge and a weatherstrip. An opening/closing member of a vehicle is attached to a vehicle by a hinge in a manner enabling easy opening and closing of the opening/closing member. Such members include doors, such as side-doors and rear doors, and other opening/closing members, such as trunk lids. This article gives some insight into the dimensioning process, with special focus on large deflection analysis of wiring harness(W/H) in vehicle's door structures for durability problem. The Finite elements analysis for door wiring harness(W/H) is used for residual stresses and dimensional stability with bending flexible. Durability test data for slam test specimens were compared with the numerical predicted fatigue life for verification. The final testing of the component combines the effects of these microstructural features with the complex stress state arising from the combined service loading and residual stresses.

• Journal of Auto-vehicle Safety Association
• /
• 제13권4호
• /
• pp.99-105
• /
• 2021

Vehicle occupant postures are anticipated to vary more widely during automated driving and to become more significant in terms of the autonomous vehicle safety. Experimental and computational approaches are needed to investigate and evaluate occupant behaviors during automated driving in general. However the validity and effect of such occupant postures are unknown, thus it is necessary to examine occupant behaviors and injury countermeasures for various occupant postures. This study was focused on the development and evaluation of restraint system model for occupant behavior examinations in the first step according to autonomous vehicle occupant safety. The finite element models of dummy and restraint system were set up and simulation results showed overall model performance and safety tolerances of different reclined occupant postures during frontal impact loading.

• Structural Engineering and Mechanics
• /
• 제77권6호
• /
• pp.809-817
• /
• 2021

In this study, the dynamic behavior of a three-span hybrid continuous arch bridge under vehicle loading is investigated. The natural vibration characteristics of the bridge were analyzed through pulsation test. In the dynamic loading test, the vibrations of the bridge under different truck speeds and different pavement conditions were tested, and time histories of deflection and acceleration of the bridge were measured. Based on the dynamic loading test, the impact coefficient was analyzed. The results indicate that the pavement smoothness had more impacts on the vibration of the bridge than the truck's speed. The vertical damping of the bridge under the excitation of the trucks is larger than the transverse damping. Resonance occurs at the side span of the bridge under a truck at 10 km/h.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제8권2호
• /
• pp.231-238
• /
• 2004

The deterioration of the flexural capacity by progressive crack and over deflection in R/C bridges is developed actually from the dynamic repeated loading due to vehicle traffics. Such a fact suggest a necessities of confirmation and estimation of the data acquired from monotonic incremental loading test. Therefore, this study carry out the monotonic incremental loading test and dynamic repeated loading test in R/C beams strengthened with CFS. By dynamic repeated loading test, the experiments confirmed the validities and fittness of the results acquired from monotonic incremental loading test and estimated the characteristics of the moment-curvature, degradation of the flexural rigidity, crack and failure.

• Journal of the Korean Society for Precision Engineering
• /
• 제30권2호
• /
• pp.231-235
• /
• 2013

The purpose of this paper is to compare with estimation of equivalent fatigue load in time domain and frequency domain and estimate the fatigue life of structure with multi-axial vibration loading. The fatigue analysis with two methods is implemented with various signals like random, sinusoidal signals. Also an equivalent fatigue life estimated by rainflow cycle counting in time domain is compared with results estimated with probability density function of each signal in frequency domain. In case of frequency domain, equivalent fatigue life can estimate through Dirlik's method with probability density function. And the work proposed in this paper compared the fatigue damage accumulated under uni-axial loading to that induced by multi-axial loading. The comparison is preformed for a simple cantilever beam, which is exposed to vibrations of several directions. For verification of estimation performance of fatigue life, results are compared to those of FEM analysis (ANSYS).

• Korean Management Science Review
• /
• 제17권2호
• /
• pp.87-95
• /
• 2000

This paper presents two analytical approaches to determine the vehicle fleet size for container shuttle service. The shuttle service can be defined as the repetitive travel between the designated places during working period. In the first approach, the transportation model is adopted in order to determine the number of vehicles required. Its advantages and disadvantages in practical application are also discussed. In the second approach, a logical network which is oriented on job is transformed from a physical network which is focused on demand site. Nodes on the logical network represent jobs which include loaded travel, loading and unloading and arcs represent empty travel for the next jobs which include loaded travel, loading and unloading and arcs represent empty travel for the next job. Then a mathematical formulation is constructed similar to the multiple traveling salesman problem (TSP). A solution procedure is carried out based on the well-known insertion heuristic with the real world data.