• 제목/요약/키워드: Vehicle Speed and Distance

검색결과 312건 처리시간 0.029초

능동적 안전성을 고려한 윈도 세이프티 모듈의 개발 (A Development of Safety Window System Module Considering Active Safety Technology)

  • 이중순;손일문;곽효연
    • 한국자동차공학회논문집
    • /
    • 제16권3호
    • /
    • pp.23-29
    • /
    • 2008
  • It is necessary to develope the active safety system in terms of driver's safety and convenience. In this paper, we were developed the non-contact type of safety window system operated by the initial value of feedback control such as the output signal of photo sensor. It was designed based on the control algorithm with an improved load sensitivity. Therefore, compared with the existing system, it is possible to prevent the occurrence of a mull-function. Also, it has a convenient functions of the window such as an auto up/down and closing, and has a response times better. It can be installed the various types of common vehicles that have the different movement distance and speed of window. In conclusion, the developed system may be adapted the vehicle commercially.

차량 이동하중 해석에 의한 강합성 사장교 케이블의 충격계수 평가 (Evaluation of Cable Impact Factor by Moving Vehicle Load Analysis in Steel Composite Cable-Stayed Bridges)

  • 박용명;박재봉;김동현;최병호
    • 한국강구조학회 논문집
    • /
    • 제23권2호
    • /
    • pp.199-210
    • /
    • 2011
  • 사장교의 케이블은 타 부재에 비해 단면적이 매우 작고 고응력 상태이므로 진동에 매우 민감한 부재이다. 따라서 사장교 케이블의 충격계수는 실제 차량의 주행으로 발생하는 동적 효과를 반영하여 평가하는 것이 합리적이다. 이에 본 연구에서는 차량 중량, 케이블 모델, 노면조도, 차량속도 및 차량간격의 설계변수를 고려하여 중앙경간 230m 및 540m의 강합성 사장교를 대상으로 차량 이동하중 해석을 수행하여 케이블의 충격계수를 평가하고, 현재 실무에서 사용되고 있는 영향선을 이용한 방법과 비교하였다. 본 연구에 사용된 노면조도는 ISO 8608 규정에 근거하여 랜덤 생성하였으며, 생성 회수에 따른 케이블 충격계수의 수렴 추이를 분석함으로써 결과의 신뢰도를 확보하였다. 또한, 차량모델은 9-자유도를 갖는 트랙터-트레일러 형식의 트럭 모델을 적용하였으며 차량의 운동방정식은 Lagrange운동방정식으로부터 유도하였다. 해석 대상 교량은 3차원 유한요소모델로 구축하였으며 보강형과 주탑은 보요소, 케이블은 등가탄성계수를 갖는 트러스요소를 사용하였다. 이동하중으로 인한 교량-차량 상호작용 해석에는 직접적분법을 사용하였으며, 교량의 변위 오차율이 허용 범위 내에 수렴될 때까지 반복 해석을 수행하였다. 그 결과, 실제 차량의 주행으로 발생하는 동적 효과를 고려하지 못하는 영향선 기법은 차량 이동하중 해석에 비해 측경간 단부 케이블의 충격계수를 과소평가할 수 있는 것으로 나타났다.

스마트폰에서 다중데이터를 이용한 측위시스템 구현 (An Implementation of Positioning System using Multiple Data in Smart Phone)

  • 이현섭;김진덕
    • 한국정보통신학회논문지
    • /
    • 제15권10호
    • /
    • pp.2195-2202
    • /
    • 2011
  • 현재 차량의 현재 위치와 진행방향 이동거리를 알려주는 내비게이션이 사용되고 있다. 이러한 내비게이션의 센서 중 차량의 현재 위치를 측위 하기 위해 GPS 센서를 사용 하는데, 이 GPS 센서는 위성신호의 삼각측량에 의해 얻은 좌표 값으로 현재 위치를 측위하게 된다. 이러한 특성 때문에 GPS의 위성신호가 닫지 않는 터널이나 고층 건물이 둘러싸인 지역에서는 그 위치를 측위 하기 힘들다. 또한 GPS 수신율이 떨어지는 지역에 대해서는 위치 이탈 현상이 발생하기도 한다. 이에 GPS의 문제점에 대해 보완하고, 차량내부에 있는 CAN 센서와 스마트폰의 지자기 센서를 이용한 측위를 이용하였고 주변의 WiFi의 AP 정보를 이용한 위치 측위 방식을 이용하여 위성신호가 닫지 않는, GPS 음영지역에 대해서 위치를 측위하고 GPS 가 불안정한 지역에 있어서는 위치 보정이 되는 시스템을 설계 및 구현하였다. 그 결과 GPS신호를 보정 할 수 있었으며 GPS 음영지역에 대해서는 다른 데이터로 차량의 위치를 측위 할 수 있었다.

국내 단지도로에서 도로교통소음에 대한 통계학적 특성연구 -도로교통 소음원이 수음점에 미치는 수평.수직 음원 분포특성 중심으로- (The Study on the Statistical Characteristics of Road Traffic Noise in Apartment Complex)

  • 조일형;장순웅;강성원;김석구;고정용
    • 한국환경과학회지
    • /
    • 제16권10호
    • /
    • pp.1179-1187
    • /
    • 2007
  • This paper represents the statistical characteristics of sources and receptors for road traffic noise in apartment complex. Also we suggested that the site-specific characteristics of vertical and horizontal distributions in the complex apartment have been derived using a different analysis for evaluating levels of Leq1h by the apartment floor at a given distance from a road in terms of the flow rate, the mean speed of the traffic, and the percentage of the type vehicles in the day and night periods. As a result, the contribution orders of traffic quantity by the type of vehicles showed as followed: light vehicle>medium vehicle>heavy vehicle>motorcycle. Especially, the mixing ratio of entering the road on the heavy vehicle in the daytime was two times higher than that of in the night. The speed in all types of vehicle is in the range of 41 and 81 km/hr and noise level was not significantly different in day and night-time. The sources of road traffic noise had different variations and uncertainties using a random variable and probability distribution. The sound distribution to receptors by the apartment floor showed S curve between 1st floor and $15^{th}$ floor With the normality test, the normal distributions using Anderson-Darling Test followed $1^{st},\;3^{th},\;13^{th}$ and $15^{th}$, floor in the daytime and all floors except $7^{th}$ floor in the night (p>0.05). And also, the value of the pearson correlation coefficient (r) obtained in this study have significantly different at the range of floor. In conclusion, the results suggested that the distribution characteristics of levels of $Leq_{1h}$ on the sources and receptors of road traffic noise in apartment complex must be improved and developed on the guideline of regulation of road traffic noise.

주행차량에 의한 궤도 동적?성의 매개변수 분석 (Parametric Analysis in Dynamic Characteristics of Railway Track due to Travelling Vehicle)

  • 김상효;이용선;조광일
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 춘계학술대회 논문집
    • /
    • pp.337-342
    • /
    • 2003
  • The dynamic load effects are conveyed to the railway bridges through tracks which are generated by moving trains The dynamic load effects may vary due to the dynamic characteristics of the applied vehicle loads and the railway bridges containing the track system. However, the track effects have been neglected or simplified by spring elements in the most studies since it is quite complex to consider the track systems in the dynamic analysis models of railway bridges. In this study, track system on railway bridges is modeled using a three-dimensional discrete-support model that can simulate the load carrying behavior of tracks. In addition, this program is developed with the precise 20-car model and a continuous PSC(prestressed concrete) box girder bridge, which is the main bridge type of Korea Train express(KTX). Three-dimensional elements are used for both. The dynamic response of railway bridges is found to be affected depending on whether the track model is considered or not. The influencing rate depends on the traveling speed and different wheel-axle distance. The dynamic bridge response is decreased remarkably by the track systems around the resonant frequency. Therefore, the resonance effect can be reduced by modifying the track properties in the railway bridge.

  • PDF

실시간 이미지 처리 방법을 이용한 개선된 차선 인식 경로 추종 알고리즘 개발 (Development of an Improved Geometric Path Tracking Algorithm with Real Time Image Processing Methods)

  • 서은빈;이승기;여호영;신관준;최경호;임용섭
    • 자동차안전학회지
    • /
    • 제13권2호
    • /
    • pp.35-41
    • /
    • 2021
  • In this study, improved path tracking control algorithm based on pure pursuit algorithm is newly proposed by using improved lane detection algorithm through real time post-processing with interpolation methodology. Since the original pure pursuit works well only at speeds below 20 km/h, the look-ahead distance is implemented as a sigmoid function to work well at an average speed of 45 km/h to improve tracking performance. In addition, a smoothing filter was added to reduce the steering angle vibration of the original algorithm, and the stability of the steering angle was improved. The post-processing algorithm presented has implemented more robust lane recognition system using real-time pre/post processing method with deep learning and estimated interpolation. Real time processing is more cost-effective than the method using lots of computing resources and building abundant datasets for improving the performance of deep learning networks. Therefore, this paper also presents improved lane detection performance by using the final results with naive computer vision codes and pre/post processing. Firstly, the pre-processing was newly designed for real-time processing and robust recognition performance of augmentation. Secondly, the post-processing was designed to detect lanes by receiving the segmentation results based on the estimated interpolation in consideration of the properties of the continuous lanes. Consequently, experimental results by utilizing driving guidance line information from processing parts show that the improved lane detection algorithm is effective to minimize the lateral offset error in the diverse maneuvering roads.

일반도로 중앙분리대 측 백색 실선 도입 타당성 분석 연구 (Feasibility Analysis for White Pavement Markings in the Roadways with Median Barrier)

  • 김다예;홍경식;이호원
    • 한국도로학회논문집
    • /
    • 제20권3호
    • /
    • pp.75-84
    • /
    • 2018
  • PURPOSES: This study analyzes feasibility for application white pavement markings in the roadways with median barrier. METHODS : By reviewing numerous relevant laws, standards, and operational cases, the white pavement markings' excellence was demonstrated. Driver's behavior was analyzed through a virtual driving experiment using driving simulator and field tests. RESULTS:First, white pavement markings are superior to yellow pavement markings in terms of visibility, economics, and safety. Second, as a result of virtual driving experiment, the color of line in the roadway with median barrier didn't affect the driver's behavior such as the average vehicle speed, the distance bias in the lane and the separation distance from the centerline. Third, field test demonstrated that the driver tended to recognize the median barrier as an obstacle. In addition, the central driving ratio in the lane was increased due to improving the visibility of line at night in case of the white pavement markings. CONCLUSIONS : The application of white pavement markings in the roadways with median barrier can enhance traffic safety by improving the visibility of line at night.

제한수역에서 근접 항해하는 선박의 상호작용과 안전항해거리에 관한 연구 (A Study about the interactions of vessels running parallely in proximity to one another and safe conducting of them in restricted waterways)

  • 이춘기
    • 한국항해항만학회지
    • /
    • 제29권8호
    • /
    • pp.647-652
    • /
    • 2005
  • 선박이 수로 측벽부근을 항해할 경우, 수로 측벽은 선박에 작용하는 유체력과 모멘트를 유발시킨다. 이와 마찬가지로 근접 항해중인 두 선박간에도 상호간섭력이 작용한다. 수로 측벽부근을 항해하는 경우와 근접 항해중인 두 선박의 경우의 주요 차이는 선박의 경우에 비하여 수로 측벽은 길고 일정한 형태를 갖추고 있다. 두 선박간의 상호간섭력은 종방향 거리 $\chi_0$, 횡방향 거리 $y_0$ 및 두선박의 속도의 함수로서 가정될 수 있다. 본 연구에서는 근접 항해중인 두 선박간의 간섭력을 계산하고, 두 선박간의 횡방향 및 종방항 거리와 속도에 따른 안전 항과 거리에 대해서 검토, 고찰하였다.

병항(竝航) 2선박간의 상호작용과 안전항과(安全航過)에 관한 연구 (A Study about the interactions of vessels running parallely proximity to one another and safe conducting of them)

  • 이춘기;윤점동
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 추계학술대회 논문집
    • /
    • pp.11-16
    • /
    • 2005
  • 선박이 수로 측벽부근을 항해할 경우, 수로 측벽은 선박에 작용하는 유체력과 모멘트를 유발시킨다. 이와 마찬가지로 근접항해중인 두 선박간에도 상호간섭력이 작용한다 수로 측벽부근을 항해하는 경우와 근접 항해중인 두 선박의 경우의 주요 차이는 선박의 경우에 비하여 수로 측벽은 길고 일정한 형태를 갖추고 있다. 두 선박간의 상호간섭력은 종방향 거리 $x_0$, 횡방향 거리 $y_0$ 및 두선박의 속도의 함수로서 가정 될 수 있다. 저자는 근접 항해중인 두 선박간의 간섭력을 계산하고, 두 선박간의 횡방향 및 종방향 거리와 속도에 따른 안전 항과 거리에 대해서 검토, 고찰하였다.

  • PDF

SAD 알고리즘을 이용한 차량 속도 측정 (Vehicle Speed Measurement using SAD Algorithm)

  • 박성일;문종대;고영혁
    • 한국인터넷방송통신학회논문지
    • /
    • 제14권5호
    • /
    • pp.73-79
    • /
    • 2014
  • 본 논문에서는 비디오 시?스에서 차들을 추적하고 검출하기 위해서 비디오와 이미지 처리를 활용하여 고속도로 및 일반 도로상의 교통흐름과 차량의 속도를 계측하는 기법을 제안했다. 제안된 기법은 배경이미지를 평가하기 위해서 비디오 스트림의 처음 프레임을 활용하였다. 비쥬얼 추적 시스템은 프레임 절대 차의 합을 토대로 한 단순한 알고리즘이다. 그것은 각 비디오 프레임으로부터 전경 이미지를 산출하기 위해서 배경화면을 빼고, 각 전경 이미지에 형태적 제거를 실행하고 임계값화 함으로서 임계치 윈도우에서 보인 이진이미지를 산출한다. 첫 번째 하얀 라인과 두번째 하얀 라인사이 거리를 측정하여 차의 위치를 찾았다. 평균속도는 물체의 위치 변화를 장소가 변하는 시간으로 나눔으로서 정의했다. 제시된 기법의 결과는 측정된 데이터와 잘 일치되었고, 실시간으로 결과를 본다.