• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.134-139
• /
• 2018

A novel approach for frequency-tripling vector signal generation via balanced detection without precoding and optical filter is proposed. The scheme is mainly utilizing an integrated dual-polarization quadrature phase shift keying (DPQPSK) modulator. In the DPQPSK modulator, one QPSK modulator is driven by an RF signal to generate high-order optical sidebands, while the other QPSK modulator is modulated by I/Q data streams to produce baseband vector signal as an optical carrier. After that, a frequency-tripling 16-quadrature-amplitude-modulation (16QAM) vector millimeter-wave (mm-wave) signal can be obtained by balanced detection. The proposed scheme can reduce the complexity of transmitter digital signal processing. The results show that, a 4 Gbaud baseband 16QAM vector signal can be generated at 30 GHz by frequency-tripling. After 10 km single-mode fiber (SMF) transmission, the constellation and eye diagrams of the generated vector signal perform well and a bit-error-rate (BER) below than 1e-3 can be achieved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2209-2212
• /
• 2003

In this paper, we propose the method to extract the important frequency bands from the EMG signal, and for generation of feature vector using the important frequency bands. The EMG signal is measured with 4 sensor and is recorded as 4 channel’s time series data. The same frequency bands from 4 channel’s frequency components are selected as the important frequency bands. The feature vector is calculated by the function formed using the combination of selected same important frequency bands. The EMG signals acquired from seven wrist motion type are recognized by changing into the feature vector formed. Then, the extraction and generation is performed by using the double combination of the genetic algorithm (GA) and the neural network (NN). Finally, in order to illustrate the effectiveness of the proposed method, computer simulations are done.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.277-284
• /
• 2010

This paper presents a novel hybrid carrier based space vector modulation for cascaded multilevel inverters. The proposed technique inherits the properties of carrier based space vector modulation and the fundamental frequency modulation strategy. The main characteristic of this modulation are the reduction of power loss, and improved harmonic performance. The carrier based space vector modulation algorithm is implemented with a TMS320F2407 digital signal processor. A Xilinx Complex Programmable Logic Device is used to develop the hybrid PWM control algorithm and it is integrated with a digital signal processor for hybrid carrier based space vector PWM generation. The inverter offers less weighted total harmonic distortion and it operates with equal electrostatic and electromagnetic stress among the power devices. The feasibility of the proposed technique is verified by spectral analysis, simulation, and experimental results.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.345-350
• /
• 2010

This paper presents a Photovoltaic Generation system using a Space Vector Modulation. PWM voltage source inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power, from 10 to 20[%]. Synchronous signal and control signal was processed by the 56F8323 microprocessor for stable modulation. Also, Waveforms output current and voltage of system controlled so that phase conforms and can supply electric power that stabilize by the unit power factor.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
• /
• pp.65-68
• /
• 2000

In this paper, as a compatible software radio transmission system, Digital-Radio conversion system which can directly change the digital signal generated by the logic circuit into radio signal is proposed. By the vector synthesis method, the digital signals can change directly into radio signal. If such a circuit is realized, RF circuit and an antenna can be composed by the simple one device, and the radio is directly controlled and performed by the software processing which is the essence of software radio. This Digital-Radio conversion system of this paper give many number of communication channels being offered by PN code and offer a hardware design flexibility by digitization, therefore it decrease the percentage ratio of hardware of system and give a more flexible function of software basis. In this paper, this proposed Digital-Radio conversion system is called D/R converter, and the principle of this D/R converter, radio signal generation algorithm is explained and the performance characteristics of proposed algorithm is shown in time base by the computer simulation method.

• 한국태양에너지학회 논문집
• /
• 제32권6호
• /
• pp.29-36
• /
• 2012

The existing solar tracking sensor for 2 axial control system to trace latitude and longitude is made of four phototransistor. The phototransistor-making is difficult and it's manufacturing is more high-priced than a wide use phototransistor because they have to the same characteristics of each phototransistor output signal. This paper described the algorithm for supplement these weakness. The algorithm applied to signal normalizing method and vector decomposition law. The deviations of each a wide use phototransistor output signal are resolved by signal normalizing method and it is able to make a solar tracking sensor using three phototransistor by vector decomposition law. Therefore, in this paper, it is reduced the number of phototransistor that is composed of solar tracking sensor and possible to use a wide use phototransistor by the proposed algorithm.

• 한국음향학회지
• /
• 제43권2호
• /
• pp.243-252
• /
• 2024

최근에 연구되기 시작한 폴리(Foley) 음향 생성 모델 중 벡터 양자화 변분 오토인코더(Vector Quantized-Variational AutoEncoder, VQ-VAE) 구조와 Pixelsnail 등 생성모델을 활용한 생성 기법은 중요한 연구대상 중 하나이다. 한편, 딥러닝 기반의 음향 신호의 압축/복원 분야에서는 기존의 VQ-VAE 구조에 비해 잔여 벡터 양자화 기술이 더 적합한 것으로 보고되고 있으며, 따라서 본 논문에서는 폴리 음향 생성 분야에서도 잔여 벡터 양자화 기술이 효과적으로 적용될 수 있을지 연구하고자 한다. 이를 위하여 본 논문에서는 기존의 VQ-VAE 기반의 폴리 음향 생성 모델에 잔여 벡터 양자화 기술을 적용하되, Pixelsnail 등 기존의 다른 모델과 호환이 가능하고 연산 자원의 소모를 늘리지 않는 모델을 고안하여 그 효과를 확인하고자 하였다. 효과를 검증하기 위하여 DCASE2023 Task7의 데이터를 활용하여 실험을 진행하였으며, 그 결과 평균적으로 0.3 가량의 Fréchet audio distance 의 향상을 보이는 것을 확인하였다. 다만 그 성능 향상의 정도가 제한적이었으며, 이는 연산 자원의 소모를 유지하기 위하여 시간-주파수축의 분해능이 저하된 영향으로 판단된다.

• 융합신호처리학회논문지
• /
• 제1권2호
• /
• pp.131-137
• /
• 2000

본 논문은 소프트웨어 무선에 적합한 전송장치로써 로직회로에 의해 생성되어지는 디지털신호를 직접 무선으로 변환시킬 수 있는 디지털-무선 변환장치를 제안한다. 이러한 회로가 실현되어지면 변조회로, RF회로와 안테나를 1개의 간단한 디바이스로 실현할 수 있어 소프트웨어무선의 본질인 소프트웨어처리에 의한 무선의 제어를 직접 수행할 수 있게 된다. 본 논문의 디지털-무선 변환장치는 채널화용 PN코드가 부여하는 위상각도에 의해 무수히 많은 채널화를 기할 수 있으며 디지털화에 의하여 설계에 유연성을 주게 되므로 하드웨어의 비중을 최소화시키고 소프트웨어 베이스의 유연한 기능을 갖는다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2641-2647
• /
• 2003

Conventional DLLs estimate the delay times of satellite signals individually and feed back these measurements to the VCO independently. But VDLL estimates delay times and user position directly and then estimate the feedback term for VCO using the estimated position changes. In this process, input measurements are treated as vectors and these vectors are used for navigation. First advantage of VDLL is that noise is reduced in all of the tracking channels making them less likely to enter the nonlinear region and fall below threshold. Second is that VDLL can operate successfully when the conventional independent parallel DLL approach fails completely. It means that VDLL receiver can get enough total signal power to track successfully to obtain accurate position estimates under the same conditions where the signal strength from each individual satellite is so low or week that none of the individual scalar DLL can remain in lock when operating independently. To operate VDLL successfully, it needs to know the initial user dynamics and position and prevents total system from the divergence. The suggested integration method is to use the inertial navigation system to provide initial dynamics for VDLL and to maintain total system stable. We designed the GPS/INS integrated navigation system. This new type of integrated system contained the vector pseudorange format generation block, VDLL signal processing block, position estimation block and the conversion block from position change to delay time feedback term aided by INS.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.82-87
• /
• 2011

In this paper, a sensorless speed control system is designed for the next generation high speed railway at zero and low speed region. The applied vector control scheme is a maximum torque per ampere(MTPA) method to utilize reluctance torque of IPMSM. The designed sensorless control scheme is a rotating high frequency voltage signal injection method. To verify the designed system, a simulator for the vector controller and sensorless controller is implemented using Matlab/simulink.