• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2281-2283
• /
• 2004

In this paper, we show the vector control performances for the parallel-connected motor drive system using the indirect vector control and the proposed vector control. The suggested estimation scheme of the rotor flux position is presented to reduce the sensitivity due to the load difference between the motors. To confirm the validity of the proposed control method, we compare the simulation results of the proposed control method with those of the conventional indirect vector control method. The simulation results show that the proposed control method is more effective for a change in the load torque.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.889-896
• /
• 2006

The concept of reliability has been applied to the topology optimization based on a reliability index approach or a performance measure approach. Since these approaches, called double-loop single vector approach, require the nested optimization problem to obtain the most probable point in the probabilistic design domain, the time for the entire process makes the practical use infeasible. In this work, new reliability-based topology optimization method is proposed by utilizing single-loop single-vector approach, which approximates searching the most probable point analytically, to reduce the time cost. The results of design examples show that the proposed method provides efficiency curtailing the time for the optimization process and accuracy satisfying the specified reliability.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.1
• /
• pp.47-54
• /
• 2012

This paper presents implementation of SVPWM technique for three phase Voltage Source Inverter using FPGA. Software-based vector-control calculations much this drawback, in order to improve the hardware-vector-control tries. Without the need for additional software, vector control algorithm is designed to be modular SOPC, and DSP will reduce most of the operations. In this paper, the SVPWM that using HDL for the AC motor vector control algorithm level, and the dead time part and the speed control in order to controled a speed detector and designed in the form of modules. Then ALTERA corporation Cyclone III series EP3C16F484 can be verified by implemented.

• Speech Sciences
• /
• v.13 no.4
• /
• pp.177-186
• /
• 2006

In an effort to enhance the quality of feature vector classification and thereby reduce the recognition error rate of the speaker-independent speech recognition, we employ the Mahalanobis distance in the calculation of the similarity measure between feature vectors. It is assumed that the metric matrix of the Mahalanobis distance be diagonal for the sake of cost reduction in memory and time of calculation. We propose that the diagonal elements be given in terms of the variations of the feature vector components. Geometrically, this prescription tends to redistribute the set of data in the shape of a hypersphere in the feature vector space. The idea is applied to the speech recognition by hidden Markov model with fuzzy vector quantization. The result shows that the recognition is improved by an appropriate choice of the relevant adjustable parameter. The Viterbi score difference of the two winners in the recognition test shows that the general behavior is in accord with that of the recognition error rate.

• Speech Sciences
• /
• v.11 no.4
• /
• pp.17-28
• /
• 2004

In this paper, we propose a statistical approach to improve the performance of spectral quantization of speech coders. The proposed techniques compensate for the distortion in a decoded line spectrum pairs (LSP) vector based on a statistical mapping function between a decoded LSP vector and its corresponding original LSP vector. We first develop two codebook-based probabilistic matching (CBPM) methods based on linear mapping functions according to different assumption of distribution of LSP vectors. In addition, we propose an iterative procedure for the two CBPMs. We apply the proposed techniques to a predictive vector quantizer used for the IS-641 speech coder. The experimental results show that the proposed techniques reduce average spectral distortion by around 0.064dB.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.500-503
• /
• 1997

In this paper, we investigate the control methodology of inverter Airconditioner, using the three dimensional vector scheme. The method of three dimensional vector aims at the determination of optimal switching patterns for PWM to reduce switching loss and to improve the performance supplied voltage. The induction motors are widely used for home Airconditioners. These motors can be classified into two types: on or off control of Airconditioner and the speed control of motor. For speed control of motors, generally PWM methods are used. The PWM method based upon the modulation of triangular wave can not afford to supply line voltage to the motor sufficiently because of the capacity of processing speed of micro processors. Therefore airconditioner can not be operated efficiently. This problem can be solved with the method of three dimensional vector since it can increase the supplied voltage and maximum operating frequency of motor to 173V and 96Hz, respectively. As the result, this method shows 10 - 15% increase of voltage and 10% increase of operating frequency over the modulation of triangular wave. According to a theoretical study, the number of switching in the method of three dimensional vector is smaller than that of the modulation of triangular wave. The power consumption can be reduced and the supplied voltage can be increased. In other words, the efficiency of Airconditioner can be improved. We show that the method of three dimensional vector can supply higher voltage than the modulation of triangular method through the experiments and verify the degree of improvement of efficiency theoretically.

• Journal of Korea Multimedia Society
• /
• v.21 no.7
• /
• pp.755-763
• /
• 2018

In this paper, for recognize a night pedestrian from an infrared video, a new method differentiated from the existing feature vector is proposed and experimented. The new approach focuses on the shape feature vector of the structure and shape of the pedestrian image divided by the human body seven split ratio. The pedestrian images are divided into 7 square blocks from the still image of the preprocessing process. And to reduce the dimension, the square block is converted into a mosaic block. The scalar and direction of the shape feature vector is calculated by the brightness and position of the element in the mosaic. For practicality of infrared video system, the proposed method simplifies the data to be processed by reducing the amount of data in the preprocessing in order to continuously batch process the entire system in real time. Through the experiments, we verified the validity of the proposed shape feature vector. In comparison to the existing method, we propose a new shape feature vector generation method as the feature vector for night pedestrian recognition.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.5
• /
• pp.421-428
• /
• 2015

An advanced direct torque control (DTC) with pulse width modulation (PWM) method is presented in this paper. The duty ratio calculation of the selected voltage vector is based on the voltage functions of the selected voltage vector according to the sector angle. The proposed DTC uses a conventional DTC scheme with six sector divisions and switching rules. However, the winding voltages are supplied by the PWM approach. Furthermore, the duty ratio of the switching voltage vector is determined by the flux, torque error, and motor speed. The base voltage that shall determine the duty ratio can be calculated by approximate voltage functions according to the voltage angle. For the calculation of base voltages, second-order quadratic functions are used to express the output voltage of the selected voltage vector according to voltage angle. The coefficients for the second-order quadratic functions are selected by the voltage vector, which is determined by the switching rules of the DTC. In addition, the voltage functions are calculated by the coefficients and voltage angle between the voltage vector and rotor position. The switching voltages from the calculated duty ratio can supply the proper torque and flux to reduce the ripple and error. The proposed control scheme is verified through practical experimental comparisons.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.772-780
• /
• 1994

Vector quantization with two-channel conjugate codebook has been researched as an efficient coding technique that can reduce the computational complexity and codebook storage. This paper proposes FSVQ using two-channel conjugate codebook in order to reduce the number of state codebooks. Input vector in the two-channel conjugate FSVQ is coded with state codebook of a seperated state according to each codebook. In addition, LOT is adopted to obtain to obtain a high coding gain and to reduce blocking effect which appears in the block coding. As a result, although FSVQ can achieve higher data compression ratio than general vector quantization, it has a disadvantage of having a very large number of state codebooks. However FSVQ with two-channel conjugate codebooks can employ a significantly reduced number of state codebooks, even though it has a small loss in the PSNR compared with the conventional FSVQ using one codebook. Moreover FSVQ in the LOT domain can reduce blocking effect and high coding gain compared with FSVQ in the spatial domain.

• Current Optics and Photonics
• /
• v.2 no.2
• /
• pp.134-139
• /
• 2018

A novel approach for frequency-tripling vector signal generation via balanced detection without precoding and optical filter is proposed. The scheme is mainly utilizing an integrated dual-polarization quadrature phase shift keying (DPQPSK) modulator. In the DPQPSK modulator, one QPSK modulator is driven by an RF signal to generate high-order optical sidebands, while the other QPSK modulator is modulated by I/Q data streams to produce baseband vector signal as an optical carrier. After that, a frequency-tripling 16-quadrature-amplitude-modulation (16QAM) vector millimeter-wave (mm-wave) signal can be obtained by balanced detection. The proposed scheme can reduce the complexity of transmitter digital signal processing. The results show that, a 4 Gbaud baseband 16QAM vector signal can be generated at 30 GHz by frequency-tripling. After 10 km single-mode fiber (SMF) transmission, the constellation and eye diagrams of the generated vector signal perform well and a bit-error-rate (BER) below than 1e-3 can be achieved.