• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.99-107
• /
• 2000

In this study several P type and N type ceramic semiconductors were prepared by atomic valence control and their electric resistivities were investigated with various concentrations of additive impurities. N-P junctions were made by thin film printing method and their varistor-like characteristics were investigated and their availability was discussed. The results are followings, 1) Some N type semiconductors with a proper concentration of additive impurity have minimum resistivities. 2) The N-P junction samples with ZnO as a constituent material of N type semiconductor have linearity in voltage-current characteristics, but the other N-P junction samples have the non-linearity, 3) Some N-P junction samples showed the good varistor-like characteristics.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1019-1026
• /
• 1996

In this study, we may be presented the carrier oscillation properties for the low-voltage varistor fabricated by a new method of three composition seed grain, in order to analyze the behavior of carriers at the its equivalent circuit model. The oscillation phenomena of carriers appeared from current-voltage characteristics under knee voltage is shown by the transient flow of nontrapped carriers group in the trap level of intergranular layer, surface state and/or depletion layer. In particularly, current oscillation phenomena is hardly shown in the high electric field. It is that the injected carriers from both electrodes are directly from the conduction band of forward biased ZnO grain through the intergranular layer into the reverse biased ZnO grain, because the trap level in the electric field above the knee voltage is mostly filled.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2166-2168
• /
• 2005

This paper presents the frequency - dependent characteristics of leakage currents flowing through ZnO varistor. The leakage current - voltage (V-I) characteristic curves of the commercial ZnO varistor were measured. The resistive leakage current was increased with increasing the magnitude and frequency of the applied voltage in the low conduction region. The power losses of ZnO varistor increase as the frequency of applied voltage increases, because of the dielectric loss related to the frequency of the test voltage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.1
• /
• pp.50-56
• /
• 2005

The electrical properties, clamping voltage characteristics, and stability of dysprosia-doped ZnO-P $r_{6}$ $O_{11}$-based varistors were investigated with different dysprosia contents from 0 to 2.0 mol%. The incorporation of dysprosia in varistor ceramics greatly increased the varistor voltage from 50 to 481.0 V/mm. It was found that the dysprosia is good additive improving a nonlinearity, in which the nonlinear exponent is above or near 50, and the leakage current is below 1.0 $\mu$A. The dysprosia-doped varistors exhibited superior clamping voltage characetristics, in which clamping voltage ratio is above or neat 2 at surge current of 50 A. The 0.5 mol% dysprosia-doped varistors only exhibited high stability, with the rate of varistor voltage of -0.9%, under DC acceleraetd aging stress, 0.95 $V_{lmA}$/15$0^{\circ}C$/24 h.h.h.h.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.143-148
• /
• 2005

The microstructure, electrical properties, and clamping voltage characteristics of $ZnO-Pr_6O_{11}-CoO-Cr_2O_3-Y_2O_3(ZPCCY)-based$ varistor ceramics sintered at $1350^{\circ}C$ were investigated as a function of sintering time from 1 to 3 h. With increasing sintering time, the average grain size and density increased in the range of $11.4\~16.0\;{\mu}m$ and $5.34\~5.54g/cm^3$, respectively, in accordance of increasing sintering time. The nonlinear exponent decreased in the range of $60\~26$ and the leakage current increased in the range of $1.3\~10.7\;{\mu}A$ with increasing sintering time. The clamping voltage ratio increased in the range $1.58\~1.65$ for ratio surge current of 10 A as the sintering time increased.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1495-1497
• /
• 1998

The effects of lanthania on the microstructure and electrical characteristics of Pr-based ZnO varistors were investigated. The average grain size was increased in the range of 21.9$\sim$56.3${\mu}m$ with increasing lanthania content(0.0$\sim$2.0mol%). La was largely segregated at the grain boundary. As lanthania content increases, threshold voltage and nonlinear coefficient were decreased and leakage current was increased. In particular 2.0mol% lanthania-added varistor exhibited low threshold, voltage 17.0V/mm and nonlinear coefficient of around 6. Based on these results, this varistor can be said to be used as low-voltage varistor, if nonlinear coefficient is somewhat improved forward.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.553-555
• /
• 1987

In the standard system of low voltage-oriented ZnO varistor,a small amount of $Sb_2O_3$ was added to improve the nonlinear exponent and then to find the variation of breakdown characteristics, 0.1m/o-SiO and 0.1m/o-$TiO_2$, respectively,were added We considered relationship between the breakdown voltage of systems and the microstructure. We found that the system containing 0.1m/o-$Sb_2O_3$ showed very high nonlinear exponent. And we found that SiO enhanced breakdown voltage and $TiO_2$ lowered it.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.3
• /
• pp.241-245
• /
• 2019

This work presents the response characteristics of a ZnO varistor to conductive EMP. An E1 pulse, standardized to MIL-STD-188-125-1, was applied to the varistors wherein the residual current and response times were measured with the applied E1 pulse current. Additionally, the response time was measured according to the length of the connection path. Consequently, the amplitude of the residual voltage through the ZnO varistors was increased with increasing amplitude of the applied E1 pulse current. As the length of the connection path increased, the operating response time and residual peak voltage also increased. These results indicate that the response characteristics of ZnO varistors can be applied to basic data to support the use of varistors as a protective measure against conductive EMP.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.63-68
• /
• 2007

A number of process problems should be solved in the multi-layered ceramic devices such as EMI filter. In particular, it is essential to control the sintering shrinkage in co-firing of different materials for obtaining defect-free samples such as crack, camber, and delamination which usually occur near the surface and interface. We studied the effect of the powder properties of ferrite on the co-firing behavior of green ceramic layers composed of ferrite and varistor. Three kind of ferrite powder samples as a function of milling time (24, 48, and 72 hr) were prepared. Varistor and ferrite ceramic green sheet were made by means of doctor blade process using slurry (ceramic powder and binder solution). Here, slurry was prepared by mixing 55 wt% powder with 45wt% binder solution. Varistor and ferrite green sheets were laminated at $80 kg/cm^2$, and co-fired at $900^{\circ}C$ and $1000^{\circ}C$ for 3 hr. We obtained the camber-free and co-fired ferrite/varistor layer structure by controlling the milling time and sintering temperature.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1471-1474
• /
• 1998

ZnO Varistor with composition of ZnO, $Bi_2O_3$, $Sb_2O_3$, CoO, NiO, $MnO_2$, $Cr_2O_3$, $Al_2O_3$ was fabricated by sintering methods. The purpose of this paper is to present certified voltage-current test data and a summary of electrical characteristics of the ZnO varistors.