• 반도체디스플레이기술학회지
• /
• 제15권2호
• /
• pp.70-73
• /
• 2016

Previously proposed contamination detecting sensor was revisited for the investigation of the liquid tendency. Experiments revealed different output voltages for several kinds of liquid input, but showed same values for various flow rates of each liquid. The transmittance of the liquid was measured, and it is well correlated with the voltages. Linearity in values and the compensation of the sensor to sensor deviation were tried to obtain. And, long term test was performed as attached at the manufacturing equipment in the field.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권2호
• /
• pp.46-52
• /
• 2004

Numerous connectors are used in automobiles for transmission of electrical signals across various electro-mechanical components. The connectors must operate with high reliability in order to minimize failures due to signal degradation. In this work, the effects of contamination at the contact interface of connectors used fur automobile crankshaft position sensor on the impedance change were investigated. An experimental set-up was built to simulate the electrical signal transmitted from the sensor to the engine control unit through a connector. Output from the connector was investigated using connectors contaminated with engine block residues and water droplets. It was found that slight contamination of the connectors could lead to significant signal degradation which can lead to engine failure. Also, the effect of water in the connector altered the signal severely. However, the signal gradually regained the original state as the water evaporated from the interface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
• /
• pp.123-127
• /
• 2002

This paper presented the results of evaluation of artificially contaminated suspension insulators for transmission lines. The suspension insulators were contaminated with kaolin and clay which were included various amount of natural salt. The degree of contamination were evaluated by measuring equivalent salt deposit density(ESDD). Then, the leakage currents were measured as a function of applied voltage, degree of contamination, humidity.

• Tribology and Lubricants
• /
• 제16권5호
• /
• pp.395-402
• /
• 2000

The effect of particulate contamination on friction and wear between a negative-pressure picoslider and a laser-textured disk was studied. Particles of different concentrations, materials and sizes were injected to the head-disk interface (HDI), consisting of disks with various textures, at the same speed. In a contaminated environment, durability of head-disk interface gradually decreased as the particle concentration increased. Large particles caused HDI failure early and resulted in an extensive damage to the slider and disk surfaces. Hard particles also caused HDI failure earlier and damages more extensive than soft ones. Based on the test results, mechanisms of HDI failure with picoslider were presented.

• 한국축산식품학회지
• /
• 제44권5호
• /
• pp.1011-1027
• /
• 2024

Animal-derived foods, such as meat and dairy products, are prone to spoilage by psychrotrophic bacteria due to their high-water activity and nutritional value. These bacteria can grow at refrigerated temperatures, posing significant concerns for food safety and quality. Psychrotrophic bacteria, including Pseudomonas, Listeria, and Yersinia, not only spoil food but can also produce heat-resistant enzymes and toxins, posing health risks. This review examines the characteristics and species composition of psychrotrophic bacteria in animal-derived foods, their impact on food spoilage and safety, and contamination patterns in various products. It explores several nonthermal techniques to combat bacterial contamination as alternatives to conventional thermal methods, which can affect food quality. This review highlights the importance of developing nonthermal technologies to control psychrotrophic bacteria that threaten the cold storage of animal-derived foods. By adopting these technologies, the food industry can better ensure the safety and quality of animal-derived foods for consumers.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권6호
• /
• pp.106-112
• /
• 2011

This study developed preliminary assessment methodology for priority listing of soil and groundwater contamination sources, considering source characteristics, local environments and risk receptors. Source characteristics were evaluated by scoring relative risk of contamination sources. Local environments were evaluated by scoring annual rainfall, hydraulic conductivity of aquifer, and annual groundwater use. Risk receptors were evaluated by scoring local population, direct distance to surface water, direct distance to drinking-water wells. Scores of each parameter were allocated by analysing distribution of parameter values obtained from government databases. Distributed scores of source characteristics local environments: risk receptors were 12 : 12 : 12. The preliminary assessment scored 0 to 36 for each soil and groundwater sources. Inventory of soil and groundwater sources consisted of 7 categories. This study applied the preliminary assessment methodology to Manan-Gu, Anyang City, Korea. The number of car repair and washing facility was the largest in the contamination source inventory. Petroleum storage facilities showed the highest assessment score. The preliminary assessment methodology also indicated that Anyang-Dong was the priority section among Anyang-Dong, Suksu-Dong, Bakdal-Dong. This study is the first trial for relative ranking soil and groundwater contamination sources by considering source and local characteristics. Therefore, further researches and revision of the preliminary assessment methodology need to be pursued for various applications.

• 한국환경농학회지
• /
• 제41권1호
• /
• pp.9-15
• /
• 2022

BACKGROUND: Heavy metals discharged from various sources contaminate the soil and water and the residuals can persistently be accumulated. In this study, the concentration of soil heavy metals was assessed over the whole regions of Korea based on the contamination factor and the geoaccumulation index. METHODS AND RESULTS: The data of averaged concentrations of heavy metals and fluorine were collected from the Korean Statistical Information Service (KOSIS) and the research papers published. In order to classify the levels of heavy metal concentration, the contamination index, including the contamination factor and the geoaccumulation index, based on the relative ratio of the actual concentration of heavy metals in the soil to the background concentration was calculated. In addition, the distribution of heavy metals in soils was visualized by using the geographic information system (GIS). As a result, the Cd contamination in the soils was the most concerned. CONCLUSION(S): This study very roughly indicated the outline of heavy metal concentration over the whole regions of Korea. The change in heavy metals' concentration over the time should further be monitored and the larger data of heavy metal contamination are needed for better understanding in the future.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.169-175
• /
• 2006

This study investigated variation leakage current maximum value and waveform considering applied voltage phase angel by simulating three environmental conditions, such as fog, salt fog, and kaolin contamination .As the result of applied voltage phase angel characteristics, leakage currents presented almost in phases in the early stage regardless of environmental conditions just after applying the voltage, and the phase of leakage currents certain phase lags for the discharge of the applied voltage when surface discharges occurred due to the continuous environmental contamination. In addition, the difference in phase significantly increased according to the intensity of discharges. The change in distortion rates according to the environmental contamination presented a nearly same level just after applying the voltage. The distortion rate of third harmonic for the fundamental wave presented by the order of fog>salt fog>kaolin when surface discharges occurred due to the applied voltage for certain continued periods. In the case of the fog and salt fog, the scale of spectrums decreased according to the increase in frequencies from the results of the analysis of high frequencies. In addition, the even number frequency presented a relatively large level compared to the odd number frequency under the kaolin contamination.

• 한국지반신소재학회논문집
• /
• 제8권2호
• /
• pp.1-9
• /
• 2009

본 연구는 폐기물이 매립되어있는 산업단지의 기 설계보고서와 추가로 수행된 지반조사 자료를 이용하여 매립폐기물 현황조사 결과를 바탕으로 환경오염도와 매립폐기물 안정화정도를 조사하고, 폐기물 매립 지역의 시험굴 조사를 통한 매립 폐기물의 종류와 형상 및 매립량 등을 산정하고 폐기물에 의한 토양 오염도 분석과 처리방안에 대해 검토하였다.

• Journal of Microbiology and Biotechnology
• /
• 제5권6호
• /
• pp.309-314
• /
• 1995

Samples were collected from a commercial ethanol production plant to enumerate the bacterial contamination in each step of a starch based ethanol production process. Though the slurry of raw material used in the process carried bacteria with various colony morphology in the order of $10^4$ per ml, only the colonies of white and circular form survived and propagated through the processes to the order of $10^8$ per ml at the end of fermentation. Almost all of the bacterial isolates from the fermentation broth were lactic acid bacteria. Heterofermentative Lactobacillus fermentum and L. salivarius, and a facultatively heterofermentative L. casei were major bacteria of an ethanol fermentation. In a batch fermentation L. fermentum was more detrimental than L. casei to ethanol fermentation. In a cell-recycled fermentation, ethanol productivity of 5.72 g $I^{-1} h^{-1}$ was obtained when the culture was contaminated by L. fermentum, whilst that of the pure culture was 9.00 g $1^{-1} h^{-1}$. Similar effects were observed in a cell-recycled ethanol fermentation inoculated by fermentation broth collected from an industrial plant, which showed a bacterial contamination at the level of 10$^8$ cells per ml.