• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1341-1346
• /
• 2009

In this paper, the technique to reinforce the durability performance of structure using the sensitivity information for the frame structure is applied. The fatigue life calculation for the frame structure is performed from the quasi-static and transient analysis and the characteristics of two methods are compared for the fatigue analysis. Then the reinforcement technique is applied. First, some design variables related to the locations of fatigue failure is selected. Then sensitivities of fatigue life at fracture points with respect to the variation of design variables are calculated and the vector composed of gaps between the target life and initial life cycles is calculated. If the number of fatigue fracture points is same as the number of design variables, the variations of the design variables are calculated from the linear algebraic equation. If not, the variations of the design variables are calculated from the optimization formulation with the constraints.

• 패션비즈니스
• /
• 제15권1호
• /
• pp.80-91
• /
• 2011

The purpose of this study is to evaluate the differences of visual effects and visual images by variations in shoulder angle and shoulder width of power shoulder jacket. The stimuli are 5 samples: One control group, 2 variations of the angle of shoulder line and 2 variations of the width of shoulder line. The data has been obtained from 87 fashion design majors. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test and the Correlation Analysis. The results of the study are as follows: The visual images by the angle and the width of shoulder line of power shoulder jacket are composed of 4 factors : attention, stiffness and softness, masculinity, and trendiness. Among these factors, attention factor is estimated by the most important factor. The visual effects by the angle and the width of shoulder line of power shoulder jacket are composed of 3 factors : whole silhouette, neck and arm figure, upper body figure. In these factors, the whole silhouette is estimated by the most important factor. The power shoulder jacket with extreme changes in shoulder angle has double images: it looks trendy and classy but also gives an awkward image. In case of changes in shoulder width, the visual evaluation shows big differences with the degree of expansion. The visual evaluation with variation in angle has stronger image and effect than that in width. The power shoulder jacket trend itself is also evaluated that variation in angle reflects the trend better than that in width.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1852-1860
• /
• 1991

본 연구에서는 연구대상을 주어진 구조물 형상에서 경계조건의 변화에 따른 현상 설계민감도, 특히 하중경계조건의 변화에 따른 구조물의 변형에 주안점을 두었다. 이 연구결과는 가공물의 지지위치에 따른 가공면의 변형정도 향상 및 접촉문제 해석등 에 응용이 가능하다. 유도된 민감도가 정확함을 입증하기 위하여 예제로서 하중경계 조건의 변화에 따른 범함수로 정의된 변형의 변화량을 예측하는 문제를 선정하였다.

• International Journal of Control, Automation, and Systems
• /
• 제6권6호
• /
• pp.873-883
• /
• 2008

This paper presents a parametric study on the controller design scheme for a gyro-accelerometer to have robust performance under some parameter variations. In particular, an integral and derivative based controller design method is suggested to achieve the desired performances of stability margin, bandwidth, and uniformity of scale for both gyroscopes and accelerometers with uncertainties of quality factor and resonant frequency. The simulation result shows that the control loop based on the suggested method gives satisfactory performance robustness under parameter variations, demonstrating the usefulness of the proposed design scheme.

• 복식문화연구
• /
• 제15권5호
• /
• pp.825-837
• /
• 2007

To analyze the design of Christian Dior, 216 pieces of Dior's works were collected and studied from the COLLECTION(Seoul: Dong Ah TV) from 2003 to 2005. The result is as follows. In recent three year period, Christian Dior maintained the feminine image and implemented different additions such as sexy, ethnic, avant-garde and casual image in every season. Also, to reflect a new trend or fashion sense, images of ethnic, retro, hippie or vintage were applied. In using color, different main color(YR, R, Y, BG, RP, B) were chosen every season to pursue variations. For the pattern usage, feminine beauty was presented by numerous applications of flowered pattern. Also the practice of pattern and hue in different rations in every season pursued variations in design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.560-564
• /
• 1996

A mixed H$^{2}$/$H^{\infty}$ controller design method for linear systems with time delay in all variables and parameter uncertainties in all system matrices is proposed. Robust $H^{\infty}$ performance and H$^{2}$ performance condition that accounts for model-matching of closed loop system and disturbance rejection is also derived. With expressing uncertain system with linear fractional transformation form, we transform the robust stability and performance problem to the H$^{2}$/$H^{\infty}$ optimization problem and design a mixed H$^{2}$/$H^{\infty}$ controller. Using the proposed method, mixed H$^{2}$/$H^{\infty}$ controller for underwater vehicle with time delay and parameter variations are designed. Simulations of a design example with hydrodynamic parameter variations and disturbance are presented to demonstrate the achievement of good robust performance.t performance.ance.

• 대한전기학회논문지
• /
• 제34권10호
• /
• pp.407-417
• /
• 1985

This paper describes a new method for the design of adaptive model-following control systems. This design concept is developed using the theory of slide mode. Authors present new results on the sliding control methodology to achieve accurate tracking for a class of multi-input multi-output, time-varying systems in the presence of parameter variations and disturbances. This algorithm can be easily applied to the multivariable control systems and obtained a smoother control signal in comparison to variable structure model following control systems. The design technique is easy and the control structure is simple. The design requires little computational effort. The control system is less sensitive to plant parameter variations and noise disturbances.

• 패션비즈니스
• /
• 제14권2호
• /
• pp.127-137
• /
• 2010

The purpose of this study is to evaluate the differences of visual image by variations in the volume of flare and the length of flare skirt. The stimuli are 12 samples: 4 variations of volume of flare and 3 variations of the length of skirt. The data has been obtained from 181 fashion design majors. The data has been analyzed by Factor Analysis, ANOVA, Scheffe's Test and the MCA method. The results of the study are as follows: The visual image by the volume of flare and the length of flare skirt are composed of 4 factors : matureness, attractiveness, stiffness and softness, moderateness. In these factors, matureness is estimated by the most important factor. When the volume of flare is $180^{\circ}$, the visual images are shown to be better. As the skirt gets shorter, it has more vivid and attractive image. And as the skirt gets longer, it looks older and gentle but not too plain or ordinary. The volume of flare and skirt length interact with each other in matureness and attractiveness factors. But the volume of flare affects more in stiffness and softness and moderateness factors than skirt length.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.258-267
• /
• 2016

Three-dimensional integrated circuits (3D ICs) experience die-to-die variations in addition to the already challenging within-die variations. This adds an additional design complexity and makes variation estimation and full-chip optimization even more challenging. In this paper, we show that the industry standard on-chip variation (AOCV) tables cannot be applied directly to 3D paths that are spanning multiple dies. We develop a new machine learning-based model and methodology for an accurate variation estimation of logic paths in 3D designs. Our model makes use of key parameters extracted from existing GDSII 3D IC design and sign-off simulation database. Thus, it requires no runtime overhead when compared to AOCV analysis while achieving an average accuracy of 90% in variation evaluation. By using our model in a full-chip variation-aware 3D IC physical design flow, we obtain up to 16% improvement in critical path delay under variations, which is verified with detailed Monte Carlo simulations.

• 한국의상디자인학회지
• /
• 제14권4호
• /
• pp.127-137
• /
• 2012

The purpose of this study is to recognize the differences of visual evaluation by variations in width of hem line and waistline position of the flare pants. The stimuli are 9 samples: One control group, 3 variations of the width of hem line and 3 variations of the waistline position. The data has been obtained from 44 fashion students. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: The visual evaluation by the width of hem line and waistline position of flare pants are composed of 5 factors : physical characteristics, elegance, originality, comfort, and stiffness. Among these factors, the physical characteristic is evaluated to be the most important factor. As a v isual evaluation result o f changes in the width o f hern l ine, 8 4 cm in width (the narrowest width) was highly evaluated in physical characteristics, elegance, and originality factors. For the result of changes in the waistline position, high-waisted flare pants were highly effective in physical characteristics, and also evaluated well in elegance, originality and stiffness factors. The flare pants did not show any interaction between the width of hem line and waistline position. The waistline position had more influence on visual evaluation in physical characteristics, originality and comfort factors while elegance and stiffness factors were affected by the width of hem line.