• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.4
• /
• pp.19-27
• /
• 2012

The objective of this study was to test the pollutant reduction effect by the silt fence and vegetated ridge through field monitoring. The experiment plots were established with two replication and three treatments. Each plot was designed with 5 m width, 22 m length, and 3 % slope. Flumes with the floating type stage gages were installed at the outlet of each plot to monitor the runoff. For a rainfall monitoring, tipping bucket rain gage was installed within the experiment site. Cultivated crops were spring daikon and autumn chinese cabbage. Analysis of variance (ANOVA) indicated that the water quality concentration from three experiment plots were not significantly different in 5 % of significant level. The monitoring results showed that the average pollution loads reduced by silt fence compared to control were SS 75.33 %, TN 40.87 %, TP 56.58 %, BOD 52.12 %, COD 36.07 %, TOC 34.99 %; by vegetated ridge compard to control were SS 65.27 %, TN 81.80 %, TP 54.26 %, BOD 67.09 %, COD 46.55 %, TOC 43.30 %. Analysis of Spearman's rank correlation coefficient showed that BOD-SS and SS-Turbidity were highly related at the silt fence and vegetated ridge plots. In all plots, SS-Turbidity and TP-TN relations were relatively high. The monitoring results showed that the silt fence and vegetated ridge were effect method to reduce the pollutant loads from the field runoff. Long-term monitoring is required to obtain more quantitative reduction effect for diverse crops and to increase the reliability of results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2C
• /
• pp.174-180
• /
• 2007

In the tone reservation (TR) scheme, it is known that the set of randomly selected peak reduction tones (PRT's) performs better than the contiguous PRT set and the interleaved PRT set in the PAPR reduction of orthogonal frequency division multiplexing (OFDM). It is also known that finding the optimal PRT set corresponds to the secondary peak minimization problem in the TR scheme. However, the problem cannot be solved for the practical number of tones since it is NP-hard. In this paper, a new search algorithm for the near optimal PRT set is proposed based on the fact that the secondary peak value of the PRT set statistically tends to decrease asthe variance of the PRT set decreases.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.12
• /
• pp.431-438
• /
• 2020

In this paper, the method to extract lip contour by multiple threshold is proposed. Spyridonos et. el. proposed a method to extract lip contour. First step is get Q image from transform of RGB into YIQ. Second step is to find lip corner points by change point detection and split Q image into upper and lower part by corner points. The candidate lip contour can be obtained by apply threshold to Q image. From the candidate contour, feature variance is calculated and the contour with maximum variance is adopted as final contour. The feature variance 'D' is based on the absolute difference near the contour points. The conventional method has 3 problems. The first one is related to lip corner point. Calculation of variance depends on much skin pixels and therefore the accuracy decreases and have effect on the split for Q image. Second, there is no analysis for color systems except YIQ. YIQ is a good however, other color systems such as HVS, CIELUV, YCrCb would be considered. Final problem is related to selection of optimal contour. In selection process, they used maximum of average feature variance for the pixels near the contour points. The maximum of variance causes reduction of extracted contour compared to ground contours. To solve the first problem, the proposed method excludes some of skin pixels and got 30% performance increase. For the second problem, HSV, CIELUV, YCrCb coordinate systems are tested and found there is no relation between the conventional method and dependency to color systems. For the final problem, maximum of total sum for the feature variance is adopted rather than the maximum of average feature variance and got 46% performance increase. By combine all the solutions, the proposed method gives 2 times in accuracy and stability than conventional method.

• Journal of Korean Academy of Nursing
• /
• v.38 no.2
• /
• pp.321-331
• /
• 2008

Purpose: To examine the relationship between body fat percentage (BFP) and N-K cell activity (NKCA) in Korean breast and rectal cancer patients just after diagnosis. Methods: With 35 subjects enrolled between November 2002 and May 2003, Bioelectrical Impedance Analysis was used to estimate BFP. FACS Analysis was used to measure N-K cell activity. The relationships between BFP and NKCA were identified by using curve estimation, simple regression, and multiple regression, Results: The mean BFPs of the subjects and all the sub-groups were higher than acceptable BFPs. Both the mean NKCAs of male and female subjects were lower than that of healthy women. NKCA was explained by BFP with a 14.9% variance in the total subjects (p<.05). There were significant negative relationships between BFP and NKCA after controlling age, type of cancer, and stage of cancer while no significant relationship was found after controlling for gender. The relationships between BFP and NKCA in the sub-groups of female, breast cancer, and stage I, and II were significant. The relationships between male, rectal cancer, and the stage III, and VI sub-groups were not identified, but they revealed a mild to moderate steep in curve estimation. Conclusion: Weight reduction could prevent the risk and advancement of breast and rectal cancer in Koreans.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.113-118
• /
• 1992

The live loads acting on structures are generally computed in terms of equivalent uniformly distributed loads for the simplicity in design process. The loads, therefore, tend to decrease with increasing influence area in both load intensity and variance. Since multi-story column loads result from accumulation of loadings action on several different floors, its influence area becomes wider and lifetime maximum decreases. In the design codes proposing the design loads according to types of structural members(i.e., slabs, beams, columns), rather than the change of influence area, some proper reduction factors are given for columns which support more than one floor. Using the live load models developed for columns supporting single floor, in this study, the probabilistic characteristics of multi-story column loads are analyzed. In addition reduction factors given for multistory columns in current practice are calibrated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.243-250
• /
• 2017

In this study, single number rating methods of sound absorption coefficients are discussed. After that the sound absorption performance of noise barriers which are classified by Korea Standard are analyzed according to several standards. The existing rating methods such as NRC (noise reduction coefficient), SAA (sound absorption average) or ${\alpha}_w$ (weighted sound absorption coefficient) from ASTM C423, KS F 3505 and ISO 11654 are introduced. The sound absorption performance of noise barrier is evaluated to compare NRC and ${\alpha}_w$ value. When the value is over 0.6 there are large variance between NRC and ${\alpha}_w$ value. As results, it is needed to unify single number rating methods of sound absorption coefficients for Korean standards on sound absorbing materials.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.61-69
• /
• 2002

Oship stream is located nearby south eastern coasts. This study was performed to find out waters quality modeling and then to predict water quality of Oship stream. Based on survey data, BOD, T-N, T-P calibration and verification result were in good agreement with measured value within mean coefficient variance(MSE) value, which were 13.9%, 9.0%, 26.5% and 19.5%, 12.0%, 16.5%, respectively. Sectional water quality predictions of the main stream of Oship stream are executed on the basis of the following cases 1) with sewage treatment of Dogye-eup 2) reduction of mine wastewater treatment of 80% in th basin. As a result, BOD, T-P improvement rates at down stream of Oship stream, case 1) were appeared 12.2%, 22.2%, case 2) maximum sulfate ion and conductivity reduction removal rate of Oship stream were 58%, 68%. The main pollution sources of Oship-stream were almost domestic wastewater and mine wastewater discharged from Dogye-eup which located in uppers stream. The large effects will appear after the construction of Dogye sewage water treatment plant which remove the organic matter and nutrients in these sewage water. The waste water from mine can not easily to treat for characteristics of effluence and economic problems. However, to achieve the goal of water quality in Oship-stream water system, treatments of those are necessary.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1990.10a
• /
• pp.69-72
• /
• 1990

The live loads acting on structures are generally computed in terms of equivalent uniformly distributed loads for the simplicity in design process. The loads, therefore, tend to decrease with increasing influence area in both load intensity and variance. Since multi-story column loads result from accumulation of loadings acting on several different floors, its influence area becomes wider and lifetime maximum decreases. In the design codes proposing the design loads for types of structural members (i.e., slabs, beams, columns), not for tile change of influence area, some proper reduction factors are given for columns which support more than one floor. Using the live load models developed for colons supporting single floor, in this study, the probabilistic characteristics of multi-story column loads are analyzed. In addition reduction factors given for multi-story columns in current practice are calibrated.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.853-866
• /
• 2020

The purposes of this research were: 1) to investigate the effect of participatory management on financial information asymmetry, 2) to investigate the effect of corporate governance on financial information asymmetry, 3) to examine the influences of benefits incentives on financial information asymmetry, and 4) to test the mediating effects of benefits incentive that influences the relationship between participatory management, corporate governance, and financial information asymmetry. The research sample consisted of 388 Thai-listed firms. Data were collected through a survey questionnaire. Descriptive analysis, Multiple Regression Analysis, and Structural Equation Modeling were used for the data analysis. The results revealed: 1) participatory management and participation in evaluation had a negative influence on financial information asymmetry. 2) Corporate governance and the rights of shareholders had a negative influence on financial information asymmetry. 3) Benefits incentive was negatively associated with financial information asymmetry. 4) The model's influences of participatory management, corporate governance on the reduction of financial information asymmetry through benefits incentive as mediator fit the empirical data (Chi-square = 104.459, df = 84, p = 0.065, GFI = 0.967, RMSEA = 0.025). The variables in the model explained 78.00% and 4.70 % of the variance of benefits incentive and financial information asymmetry, respectively.

• The KIPS Transactions:PartB
• /
• v.8B no.6
• /
• pp.693-698
• /
• 2001

Noisy data are often fitted using a smoothing parameter, controlling the importance of two objectives that are opposite to a certain extent. One of these two is smoothness and the other is closeness to the input data. The optimal value of this parameter minimizes the error of the result. This optimum cannot be found exactly, simply because the exact data are unknown. This paper propose the threshold value for noise reduction based on wavelet-thresholding. In the proposed method PSNR results show that the threshold value performs excellently in comparison with conventional methods without knowing the noise variance and volume of signal.