• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.288-299
• /
• 2003

Statement of problem: Many kinds of post and core systems are in the market, but there are no clear selection criteria for them. Purpose: The purpose of this study was to compare the flexural strength and modulus of elasticity of core materials, and measure the bending strength of post systems made of a variety of materials. Material and Methods: The flexural strength and elastic modulus of thirteen kinds core buildup materials were measured on beams of specimens of $2.0{\times}2.0{\times}24{\pm}0.1mm$. Ten specimens per group were fabricated and loaded on an lnstron testing machine at a crosshead speed of 0.25mm/min. A test span of 20 mm was used. The failure loads were recorded and flexural strength calculated with the measured dimensions. The elastic modulus was calculated from the slopes of the linear portions of the stress-stram graphs. Also nine kinds commercially available prefabricated posts made of various materials with similar nominal diameters, approximately 1.25mm, were loaded in a three-point bend test until plastic deformation or failure occurred. Ten posts per group were tested and the obtained data were anaylzed with analysis of variance and compared with the Tukey multiple comparison tests. Results: Clearfil Photo Core and Luxacore had flexural strengths approaching amalgam, but its modulus of elasticity was only about 15% of that of amalgam. The strengths of the glass ionomer and resin modified glass ionomer were very low. The heat pressed glass ceramic core had a high elastic modulus but a relatively low flexural strength approximating that of the lower strength composite resin core materials. The stainless steel, zirconia and carbon fiber post exhibited high bending strengths. The glass fiber posts displayed strengths that were approximately half of the higher strength posts. Conclusion: When moderate amounts of coronal tooth structure are to be replaced by a post and core on an anterior tooth, a prefabricated post and high strength, high elastic modulus core may be suitable. CLINICAL IMPLICATIONS In this study several newly introduced post and core systems demonstrated satisfactory physical properties. However when the higher stress situation exists with only a minimal ferrule extension remaining a cast post and core or zirconia post and pressed core are desirable.

• Animal Bioscience
• /
• 제37권3호
• /
• pp.500-508
• /
• 2024

Objective: Due to current selection practices for increased egg production and peak persistency, the production profile, age at maturity, and body weight criteria for commercial layers are constantly changing. Body weight and age at the time of photostimulation will thus always be the factors that need to be adequately addressed among various production systems. The current study was carried out to determine the effects of pullets' body weight (low, medium, and heavy) on their performance, welfare, physiological response, and hormonal profile. Methods: With regard to live weight, 150 16-week-old pullets were divided into three groups using a completely randomized design (CRD) and held until the 50th week. One-way analysis of variance was used to evaluate the data under the CRD, and the least significant difference test was used to distinguish between treatment means. Results: In comparison to the medium and light birds, the heavy birds had higher body weight at maturity, an earlier age at maturity, and higher egg weight, eggshell weight, eggshell thickness, egg yolk index, breaking strength, egg surface area, egg shape index, egg volume, and hormonal profile except corticosterone. However, the medium and light birds had lower feed consumption rates per dozen eggs and per kilogram of egg mass than the heavy birds. Light birds showed greater body weight gain, egg production, and egg specific gravity than the other categories. At 20 weeks of age, physiological response, welfare aspects, and catalase were non-significant; however, at 50 weeks of age, all these factors-aside from catalase-were extremely significant. Conclusion: The findings of this study indicate that layers can function at lower body weights during photostimulation; hence, dietary regimens that result in lighter pullets may be preferable. Additionally, the welfare of the birds was not compromised by the lighter weight group.

• 한국산업보건학회지
• /
• 제15권2호
• /
• pp.124-134
• /
• 2005

To investigate the exposure effect of polynuclear aromatic hydrocarbons (PAHs), we measured airborne total PAHs as an external dose, urinary 1-hydroxypyrene (1-OHP) as an internal dose of PAHs exposure, and analyzed the relationship between urinary 1-OHP concentration and PAHs exposure. The study population contained 44 workers in steel-pipe coating and paint manufacture industries. The airborne PAHs was obtained during survey day, and urine were sampled at the end of shift. Personal information on age, body weight, height, eniployment duration, smoking habit, and alcohol consumption was obtained by a structured questionnaire. Airborne PAHs were analyzed by the gas chromatograph with mass selective detector. Urinary 1-OHP levels were analyzed by the high performance liquid chromatograph with ultraviolet wavelength detector. For statistical estimation, t-test, ${\chi}^2$-test, analysis of variance, correlation analysis, arid regression analysis were executed by SPSS/PC (Windows version 10). The mean of environmental total PAHs was $87.8{\pm}7.81{\mu}g/m^3$. The mean concentration ($526.5{\pm}2.85{\mu}g/m^3$) of workers in steel-pipe coating industries using coal tar enamel was the higher than that ($17.5{\pm}3.36{\mu}g/m^3$) of workers in paint manufacture industries using coal tar paint. The mean of urinary 1-OHP concentration ($51.63{\pm}3.144{\mu}\;mol/mol$ creatinine) of workers in steel-pipe coating industries was the higher than that ($2.33{\pm}4.709{\mu}\;mol/mol$ creatinine) of workers in paint manufacture industries. The mean of urinary 1-OHP concentration of smokers was the higher than that of non-smokers. There was significant correlation between the urinary concentration of 1-OHP and the environmental concentration of PAHs (r=O.S48, p<0.001), pyrene(r=0.859, p<0.001), and urinary cotinine (r=0.324, p<0.05). The regression equation between the urinary concentration of 1-OHP in ${\mu}g/g$ creatinine($C_{1-OHP}$) and airborne concentration of PAHs (or pyrene) in ${\mu}g/m^3$ ($C_{PAHs}$ or Cpyrene) is: Log ($C_{1-OHP}$)=-0.650+0.889×Log($C_{PAHs}$), where $R^2=0.694$ and n=38 for p<0.001.Log ($C_{1-OHP}$)=1.087+0.707${\times}$Log(Cpyrene), where $R^2=0.713$ and n=38 for p<0.001. From the results of stepwise multiple regression analysis about 1-OHP, significant independents were total PAHs and urinary cotinine (adjusted $R^2=0.743$, p<0.001). In this study, there were significant correlation between the urinary concentration of 1-OHP and the airborne concentration of PAHs. The urinary 1-OHP was effective index as a biomarker of airborne PAHs in workplace. But it was influenced by non-occupational PAHs source, smoking.

• Journal of Nutrition and Health
• /
• 제53권6호
• /
• pp.613-628
• /
• 2020

본 연구는 전북지역 334명의 중년여성을 대상으로 건강염려, 건강증진행동 및 삶의 질의 수준을 조사하였으며, 그 결과를 요약하면 다음과 같다. 건강염려의 총점은 60점 중 37.64점으로 보통수준, 전체 평균값은 3.14점이었다. 하위항목 중 건강습관이 3.51점으로 가장 높았다. '흡연과 같은 해로운 습관을 피한다'가 4.04점으로 가장 높으며, '건강에 대하여 걱정한다'가 2.30점으로 가장 낮았다. 건강증진의 총점은 115점 중 79.18점으로 보통수준, 전체 평균값은 3.44점이었다. 하위항목 중 생활습관이 4.09점으로 가장 높았다. 문항 중 '흡연을 하지 않는다'가 4.25점으로 가장 높으며, '미역, 김, 다시마, 멸치, 우유 등을 자주 섭취한다'가 2.48점으로 가장 낮았다. 삶의 질의 총점은 150점 중 101.18점으로 보통수준이며, 전체 평균값은 3.37점이었다. 하위항목 중 사회적 요인이 3.63점으로 가장 높았다, '자녀와의 관계만족'이 3.72점으로 가장 높았으며, '전반적인 건강상태 만족'이 2.95점으로 가장 낮았다. 조사대상자의 일반적인 특성에 따른 건강염려는 'BMI', '가계월수입', '직업', '질병여부', '체중만족', '체중조절 관심'에서 유의한 차이가 있었다. 건강증진행동은 '연령, 'BMI', '가계월수입', '생리여부', '건강보조식품섭취', '체형인식', '체형만족도'에서 유의한 차이가 있었다. 삶의 질은 'BMI', '가계월수입', '학력', '직업', '질병여부', '체중만족'에서 유의한 차이가 있었다. 삶의 질에 미치는 관련변수들의 상대적 영향력을 알아본 결과, 삶의 질에 대한 전체 1단계에서 BMI '18.5 이상 23.0 미만', 질병 '없음', 가계월수입 '500만원 이상'의 순이며, 설명력은 17.4%이었다. 2단계에서 건강염려 요인 투입에 따른 총 설명력은 23.2%이며, '건강염려'의 영향력이 가장 크며, 그 다음은 질병 '없음', 가계월수입 '500만원 이상'의 순이었다. 3단계 건강증진행동 요인 투입에 따른 총 설명력은 40.8%이었다. 삶의 질에 대한 예측변인의 영향력은 '건강증진행동', 질병 '없음', '건강염려'의 순이었다. 이상의 결과, 전북지역 중년여성의 건강염려 수준과 건강증진 행동은 보통수준이었다. 그러나 건강증진행동은 실제 삶의 질에 큰 영향력을 가지고 있었다. 특히, 질병 없는 건강상태는 건강증진행동을 실천하는데 중요한 동기부여가 될 수 있다. 따라서 건강염려 수준을 적절히 유지하며, 신체적 변화기에 있는 중년여성들의 건강관리 능력을 높이는 것이 삶의 질을 높이는 방안이라 판단된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권9호
• /
• pp.1234-1238
• /
• 2017

Objective: The vertebral number is associated with body length and carcass traits, which represents an economically important trait in farm animals. The variation of vertebral number has been observed in a few mammalian species. However, the variation of vertebral number and quantitative trait loci in sheep breeds have not been well addressed. Methods: In our investigation, the information including gender, age, carcass weight, carcass length and the number of thoracic and lumbar vertebrae from 624 China Kazakh sheep was collected. The effect of vertebral number variation on carcass weight and carcass length was estimated by general linear model. Further, the polymorphic sites of Vertnin (VRTN) gene were identified by sequencing, and the association of the genotype and vertebral number variation was analyzed by the one-way analysis of variance model. Results: The variation of thoracolumbar vertebrae number in Kazakh sheep (18 to 20) was smaller than that in Texel sheep (17 to 21). The individuals with 19 thoracolumbar vertebrae (T13L6) were dominant in Kazakh sheep (79.2%). The association study showed that the numbers of thoracolumbar vertebrae were positively correlated with the carcass length and carcass weight, statistically significant with carcass length. To investigate the association of thoracolumbar vertebrae number with VRTN gene, we genotyped the VRTN gene. A total of 9 polymorphic sites were detected and only a single nucleotide polymorphism (SNP) (rs426367238) was suggested to associate with thoracic vertebral number statistically. Conclusion: The variation of thoracolumbar vertebrae number positively associated with the carcass length and carcass weight, especially with the carcass length. VRTN gene polymorphism of the SNP (rs426367238) with significant effect on thoracic vertebral number could be as a candidate marker to further evaluate its role in influence of thoracolumbar vertebral number.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권5호
• /
• pp.2393-2398
• /
• 2012

Objectives: The purpose of this study was to evaluate the geometric accuracy of thoracic anatomic landmarks as target surrogates of intrapulmonary tumors for manual rigid registration during image-guided radiotherapy (IGRT). Methods: Kilovolt cone-beam computed tomography (CBCT) images acquired during IGRT for 29 lung cancer patients with 33 tumors, including 16 central and 17 peripheral lesions, were analyzed. We selected the "vertebrae", "carina", and "large bronchi" as the candidate surrogates for central targets, and the "vertebrae", "carina", and "ribs" as the candidate surrogates for peripheral lesions. Three to six pairs of small identifiable markers were noted in the tumors for the planning CT and Day 1 CBCT. The accuracy of the candidate surrogates was evaluated by comparing the distances of the corresponding markers after manual rigid matching based on the "tumor" and a particular surrogate. Differences between the surrogates were assessed using 1-way analysis of variance and post hoc least-significant-difference tests. Results: For central targets, the residual errors increased in the following ascending order: "tumor", "bronchi", "carina", and "vertebrae"; there was a significant difference between "tumor" and "vertebrae" (p = 0.010). For peripheral diseases, the residual errors increased in the following ascending order: "tumor", "rib", "vertebrae", and "carina"; There was a significant difference between "tumor" and "carina" (p = 0.005). Conclusions: The "bronchi" and "carina" are the optimal surrogates for central lung targets, while "rib" and "vertebrae" are the optimal surrogates for peripheral lung targets for manual matching of online and planned tumors.

• Journal of Pharmaceutical Investigation
• /
• 제40권2호
• /
• pp.109-115
• /
• 2010

The purpose of the present study was to evaluate the bioequivalence of two choline alphoscerate soft capsules, Gliatilin soft capsule (Daewoong Pharmaceuticals Co., Ltd.) and Cholicerin soft capsule (Sam Chun Dang Pharm. Co., Ltd.), according to the guidelines of Korea Food and Drug Administration (KFDA). Serum concentrations of choline after oral administration of choline alphoscerate were determined using a validated LC/MS/MS method. This method showed linear response over the concentration range of 0.5-20 ${\mu}g$/mL with correlation coefficient of 0.9999. The lower limit of quantitation using 100 ${\mu}L$ of serum was 0.5 ${\mu}g$/mL which was sensitive enough for pharmacokinetic studies. Thirty six healthy male Korean volunteers received each medicine at the choline alphoscerate dose of 1200 mg in a $2{\times}2$ crossover study. There was a one-week washout period between the doses. Blood samples were taken at predetermined time intervals up to 8 hr. $AUC_t$ (the area under the serum concentration-time curve from time 0 to 8 hr) was calculated by the linear trapezoidal rule method. $C_{max}$ (the maximum serum drug concentration) and $T_{max}$ (the time to reach $C_{max}$) were compiled from the serum concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t$ and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters, indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for Cholicerin/Gliatilin were log0.9998-log1.1172 and log0.9938-1.0944, respectively. These values were within the acceptable bioequivalence intervals of log0.80-log1.25. Thus, the criteria of the KFDA guidelines for the bioequivalence was satisfied, indicating Cholicerin soft capsule and Gliatilin soft capsule are bioequivalent.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.15-29
• /
• 2005

Statement of problem. The adjustable dental impression trays were made for being adjusted their width automatically along the width of dental arch. Purpose. The purpose of this study was to investigate the best retentive form of adjustable dental impression tray, and so to make it a more satisfactory product. Material and methods. The eight pairs of adjustable trays were made of ABS(acrylonitrile butadiene styrene) with different distribution of holes and with or without the rim on the border area of them. The experiment was done with the horse-shoe shaped metal plate to pull out the set impression body from the tray, and the tray jig which was made for holding the tray on a lower part of Universal Testing Machine(UTM, Zwick Z020, Zwick Co., Germany). After the impression in the tray was allowed to set four minutes, a tensile force was applied at right angles to the tray which had been previously seated on the jig. The force was applied to measure a maximum retentive force by use of a UTM at a constant strain rate of 100mm per minute. A 2-factor analysis of variance (p<.05) was used to determine whether differences existed among distribution of retentive holes and between rim existing and not. Results. 1 The retentive force of the upper and lower resin tray with 2mm holes on the tray border was highest(25.83/24.98kg). (p<.05) 2. As the tray had more retentive holes, it was less retentive. 3. There was no significant difference in the retentive force of the varied hole intervals in the case of distributing all the area. (p>.05) 4. The rimless trays were more retentive generally, than the rimmed trays except 2 case: upper tray group-all area / 2 mm, intervals and lower tray group-margin only / 2 mm, intervals.(p<.05) 5. Most of the adjustable trays were showed higher retentive force than perforated metal tray except the lower group that perforated on the all area at intervals of 2 mm.

• Fisheries and Aquatic Sciences
• /
• 제22권9호
• /
• pp.20.1-20.8
• /
• 2019

Background: Despite the favorable geo-climatic potential of Cameroon, the national production of tilapia remains low due to poor tilapia growth reported by fish farmers. One of the underlying reasons is the early female maturation at a very small size and precocious breeding in earthen ponds, resulting in overpopulation which leads to stunted growth and therefore to the production of unmarketable fish size. Studies have shown that dietary supplementation of G. kola enhanced growth in young Clarias gariepinus and Oreochromis niloticus. It was also reported that G. kola inhibited spawning in Tilapia adult females. Therefore, this study sought to assess the effects of Garcinia kola as growth promoter and inhibitor of gonadal development in young Oreochromis niloticus. Methods: A total of 108 juveniles weighing $13.32{\pm}0.62g$ were randomly distributed in 9 hapas of 12 fishes each (9 females and 3 males) and fed for 70 days with three isonitrogenous diets, 40% crude protein with increasing Garcinia kola supplementation levels of 0 (normal diet), 6% and 10% (experimental diets). Physico-chemical parameters of the water (temperature, dissolved oxygen, pH, nitrate, nitrite, ammonia, and transparency) were measured twice a week. Every 14 days, fish were harvested, counted, and weighed. At the end of the experiment, three fish of each sex per replicate were sacrificed and their gonad and liver collected and weighed. Data were statistically analyzed using one-way analysis of variance repeated measure followed by Newman-Keuls multiple tests. Results: The results showed that all physico-chemical parameters of the water were within the recommended values for Tilapia culture. Tilapia fed 6% Garcinia kola supplemented diet displayed higher final body weight in males ($38.60{\pm}3.50g$) and females ($36.77{\pm}3.62g$) compared to those receiving normal diet ($36.23{\pm}1.36g$ and $25.87{\pm}3.32g$; respectively to the final body weight in males and females). The gonadosomatic index and hepatosomatic index indicated no significant variation in males while in females, these were significantly low in the experimental fish compared to control fish. Conclusion: The results of this study demonstrated that supplementation of G. kola seeds in diets of young Tilapia improved growth performance and impaired gonadal development in females.

• Animal Bioscience
• /
• 제37권12호
• /
• pp.2167-2177
• /
• 2024

Objective: Black soldier fly (BSF) as an animal protein feed source is currently becoming a hot research topic. This study investigated the effects of the BSF as a protein feed source for goats on slaughter performance, muscle nutrient composition, amino acids, fatty acids, minerals, and antioxidant levels. Methods: Thirty Qianbei Ma goats (20.30±1.09 kg) were randomly divided into three groups: the control group (GRP_C) supplemented with 10% full-fat soybean, treatment 1 (GRP_U) supplemented with 10% untreated BSF, and treatment 2 (GRP_T) supplemented with 10% heat-treated BSF. One-way analysis of variance among groups (with Fisher's least significant difference post hoc comparison) was used in this study. Results: The nutrients, amino acids, fatty acids, minerals, and antioxidants in muscle were analyzed. The results showed that there were no significant differences in the moisture, dry matter, crude protein, ash, amino acids, and mineral content of the muscles among the three feeding groups. The slaughter rate and carcass weight of the GRP_U and GRP_T groups were significantly lower (p<0.05). The overall meat quality of the GRP_U and GRP_T groups decreased (p<0.05). The individual unsaturated fatty acids and total unsaturated fatty acids in the GRP_U group were higher (p<0.05) than those in the GRP_C and GRP_T groups. Both GRP_U and GRP_T decreased (p<0.05) the antioxidant capacity of the meat. Conclusion: Therefore, the heat-treated BSF had a better effect on meat quality compared to untreated BSF, but there were greater negative effects on the meat quality of GRP_U and GRP_T than GRP_C.