• 제목/요약/키워드: Variance estimation

검색결과 733건 처리시간 0.023초

층화 추출에서 보정추정량에 대한 붓스트랩 분산 추정 (Bootstrap Variance Estimation for Calibration Estimators in Stratified Sampling)

  • 염준근;정영미
    • 한국조사연구학회:학술대회논문집
    • /
    • 한국조사연구학회 2001년도 추계학술대회 발표논문집
    • /
    • pp.77-85
    • /
    • 2001
  • 무응답 상황하에서 보정 추정량에 대해 관심변수와 강한 상관계수를 가진 보조정보의 수준에 따라 모집단 총합에 대한 추정량과 분산추정량을 붓스트랩 방법을 이용해서 구했다. 이때 존재하는 보조정보의 수준이 표본인 경우와 모집단인 경우로 나누어 모집단 총합에 대한 보정 추정량(calibration estimator)을 구하고, 그에 따른 붓스트랩 분산 추정량을 도출하였다. 또한 테일러 분산 추정량, 잭나이프 분산 추정량과 붓스트램 분산 추정량의 효율성을 모의 실험을 통해 비교해 보았다.

  • PDF

컴퓨터 시뮬레이션을 통한 시스템 파라미터 추정의 효율성 (Simulation Efficiency for Estimation of System Parameters in Computer Simulation)

  • 권치명
    • 대한산업공학회지
    • /
    • 제19권1호
    • /
    • pp.61-71
    • /
    • 1993
  • We focus on a way of combining the Monte Calro methods of antithetic variates and control variates to reduce the variance of the estimator of the mean response in a simulation experiment. Combined Method applies antithetic variates (partially) for driving approiate stochastic model components to reduce the vaiance of estimator and utilizes the correlations between the response and control variates. We obtain the variance of the estimator for the response analytically and compare Combined Method with control variates method. We explore the efficiency of this method in reducing the variance of the estimator through the port operations model. Combined Method shows a better performance in reducing the variance of estimator than methods of antithetic variates and control variates in the range from 6% to 8%. The marginal efficiency gain of this method is modest for the example considered. When the effective set of control variates is small, the marginal efficiency gain may increase. Though these results are from the limited experiments, Combined Method could profitably be applied to large-scale simulation models.

  • PDF

Heterogeneity of Variance by Sex in Postweaning Gain of Angus Calves under Different Environment Levels

  • Oikawa, T.;Hammond, K.;Tier, B.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권6호
    • /
    • pp.846-849
    • /
    • 1999
  • Angus postweaning daily gain (PWDG) were analyzed to investigate heterogeneous variance by sex. A set of data (16,239 records) was divided into six sub-data sets according to level of environment. REML estimation was conducted by a multitrait model, where PWDG in each sex was treated as a separate trait. Estimates showed diversity among environmental levels, where the heritability for heifers was high in good environment but low in poor environment. The bull's estimates varied among environmental levels. The largest heterogeneity of phenotypic variance between sexes was estimated in a data set of the poor environment level. The genetic correlations between the heifer's PWDG and the bull's PWDG were high in the good environment and low in the poor environment (-0.17). The results suggest existence of genotype by sex interaction in the poor environment.

시뮬레이션과 RSM을 이용한 시스템 최적화 과정에서 공통난수 활용에 따른 분산 분석 (Analysis of Variance for Using Common Random Numbers When Optimizing a System by Simulation and RSM)

  • 박진원
    • 한국시뮬레이션학회논문지
    • /
    • 제10권4호
    • /
    • pp.41-50
    • /
    • 2001
  • When optimizing a complex system by determining the optimum condition of the system parameters of interest, we often employ the process of estimating the unknown objective function, which is assumed to be a second order spline function. In doing so, we normally use common random numbers for different set of the controllable factors resulting in more accurate parameter estimation for the objective function. In this paper, we will show some mathematical result for the analysis of variance when using common random numbers in terms of the regression error, the residual error and the pure error terms. In fact, if we can realize the special structure of the covariance matrix of the error terms, we can use the result of analysis of variance for the uncorrelated experiments only by applying minor changes.

  • PDF

Matrix Formation in Univariate and Multivariate General Linear Models

  • Arwa A. Alkhalaf
    • International Journal of Computer Science & Network Security
    • /
    • 제24권4호
    • /
    • pp.44-50
    • /
    • 2024
  • This paper offers an overview of matrix formation and calculation techniques within the framework of General Linear Models (GLMs). It takes a sequential approach, beginning with a detailed exploration of matrix formation and calculation methods in regression analysis and univariate analysis of variance (ANOVA). Subsequently, it extends the discussion to cover multivariate analysis of variance (MANOVA). The primary objective of this study was to provide a clear and accessible explanation of the underlying matrices that play a crucial role in GLMs. Through linking, essentially different statistical methods, by fundamental principles and algebraic foundations that underpin the GLM estimation. Insights presented here aim to assist researchers, statisticians, and data analysts in enhancing their understanding of GLMs and their practical implementation in diverse research domains. This paper contributes to a better comprehension of the matrix-based techniques that can be extended to GLMs.

불균형 선형혼합모형에서 추정량 (A Comparison of Estimation in an Unbalanced Linear Mixed Model)

  • 송석헌;정병철
    • 응용통계연구
    • /
    • 제15권2호
    • /
    • pp.337-354
    • /
    • 2002
  • 본 논문에서는 오차성분이 계열상관을 갖는 불균형 랜덤모형에서 분산성분의 추정방법에 대하여 연구하였다. 분산성분에 대한 추정량으로 조건부 ANOVA(cANOVA), ML및 REML추정량등을 유도하였으며, 계열상관값과 불균형의 정도에 따른 추정량의 변동성을 추정량의 분위수를 이용하는 EQDGs플롯을 이용하여 비교하였다. 모의실험결과 cANOVA추정방법은 불균형의 정도에는 추정량값이 크게 영향을 받지 않는 것으로 나타났으나 계열상관값의 증가에 따라서는 변동성을 보이고 있다. 불균형의 정도와 계열상관값을 동시에 고려하는 경우에는 ML추정방법이 cANOVA, REML추정방법보다 변동성이 안정적으로 나타났다.

Estimation of Change Point in Process State on CUSUM ($\bar{x}$, s) Control Chart

  • Takemoto, Yasuhiko;Arizono, Ikuo
    • Industrial Engineering and Management Systems
    • /
    • 제8권3호
    • /
    • pp.139-147
    • /
    • 2009
  • Control charts are used to distinguish between chance and assignable causes in the variability of quality characteristics. When a control chart signals that an assignable cause is present, process engineers must initiate a search for the assignable cause of the process disturbance. Identifying the time of a process change could lead to simplifying the search for the assignable cause and less process down time, as well as help to reduce the probability of incorrectly identifying the assignable cause. The change point estimation by likelihood theory and the built-in change point estimation in a control chart have been discussed until now. In this article, we discuss two kinds of process change point estimation when the CUSUM ($\bar{x}$, s) control chart for monitoring process mean and variance simultaneously is operated. Throughout some numerical experiments about the performance of the change point estimation, the change point estimation techniques in the CUSUM ($\bar{x}$, s) control chart are considered.

A Study on the Desired Target Signal Estimation using MUSIC and LCMV Beamforming Algorithm in Wireless Coherent Channel

  • Lee, Kwan Hyeong
    • International journal of advanced smart convergence
    • /
    • 제9권1호
    • /
    • pp.177-184
    • /
    • 2020
  • In this paper, we studied to direction of arrival (DoA) estimation to use DoA and optimum weight algorithms in coherent interference channels. The DoA algorithm have been considerable attention in signal processing with coherent signals and a limited number of snapshots in a noise and an interference environment. This paper is a proposed method for the desired signal estimation using MUSIC algorithm and adaptive beamforming to compare classical subspace techniques. Also, the proposed method is combined the updated weight value with LCMV beamforming algorithm in adaptive antenna array system for direction of arrival estimation of desired signal. The proposed algorithm can be used with combination to MUSIC algorithm, linearly constrained minimum variance beamforming (LCMV) and the weight value method to accurately desired signal estimation. Through simulation, we compare the proposed method with classical direction of in order to desired signals estimation. We show that the propose method has achieved good resolution performance better that classical direction arrival estimation algorithm. The simulation results show the effectiveness of the proposed method.

무응답 대체 방법과 대체 효과 (Imputation Methods for Nonresponse and Their Effect)

  • 김규성
    • 한국조사연구학회:학술대회논문집
    • /
    • 한국조사연구학회 2000년도 춘계학술대회 조사연구의 방법론적 쟁점
    • /
    • pp.1-14
    • /
    • 2000
  • 사회.경제조사에서 흔히 발생하는 무응답에 대한 통계적 대처 방안을 고찰하였다. 항목 무응답이 발생했을 때 무응답 데이터를 포함하지 않는 완전 데이터를 만드는 방법으로 무응답 대체 방법이 널리 이용되고 있다. 본 논문에서는 여러 가지 대체 방법을 소개하고 각 방법의 장.단점을 비교.설명하였다. 또한 대체된 데이터를 응답 데이터인 것처럼 활용했을 때 발생하는 문제점들을 지적하였다. 무응답을 대체하면 대체된 값들 때문에 대체 후 추정량의 분산은 대체 분산만큼 증가하는 반면, 대체된 데이터에 기초한 통상적인 분산추정량은 대체 분산을 추정하지 못하므로 결과적으로 대체 후 추정량의 분산을 과소추정하게 된다. 이러한 분산의 과소추정의 원인을 이론적으로 고찰하였고, 모의실험을 통하여 그 결과의 심각성을 설명하였다. 마지막으로 분산의 과소 추정 문제를 해결하는 몇 가지 수정된 분산추정 방법을 소개하고 토의하였다.

  • PDF

무응답 대체 방법과 대체 효과 (Imputation Methods for Nonresponse and Their Effect)

  • 김규성
    • 한국조사연구학회지:조사연구
    • /
    • 제1권2호
    • /
    • pp.1-14
    • /
    • 2000
  • 사회${\cdot}$경제조사에서 흔히 발생하는 무응답에 대한 통계적 대처 방안을 고찰하였다. 항목 무응답이 발생했을 때 무응답 데이터를 포함하지 않는 완전 데이터를 만드는 방법으로 무응답 대체 방법이 널리 이용되고 있다. 본 논문에서는 여러 가지 대체 방법을 소개하고 각 방법의 장${\cdot}$단점을 비교${\cdot}$설명하였다. 또한 대체된 데이터를 응답 데이터인 것처럼 활용했을 때 발생하는 문제점들을 지적하였다. 무응답을 대체하면 대체된 값들 때문에 대체 후 추정량의 분산은 대체 분산만큼 증가하는 반면, 대체된 데이터에 기초한 통상적인 분산추정량은 대체 분산을 추정하지 못하므로 결과적으로 대체 후 추정량의 분산을 과소추정하게 된다. 이러한 분산의 과소추정의 원인을 이론적으로 고찰하였고, 모의실험을 통하여 그 결과의 심각성을 설명하였다. 마지막으로 분산의 과소추정 문제를 해결하는 몇 가지 수정된 분산추정 방법을 소개하고 토의하였다.

  • PDF