• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.169-175
• /
• 2016

Purpose: Direct splinting material should have high flexural strength to withstand force during mastication and low modulus of elasticity to provide some movement while force applied for relief of stress. The purpose of this study was to compare flexural strength and modulus of elasticity of several resinous splinting materials. Materials and Methods: Four materials; Super-Bond C&B, G-FIX, G-aenial Universal Flo, FiltekTM Z350 XT; were used in this study. Fifteen rectangular bar specimens of each material were prepared. Three-point bending test were performed to determine physical properties. Maximum load at fracture was recorded and flexural strength and modulus of elasticity were calculated. One-way analysis of variance (ANOVA) and Scheffe's tests at a 0.05 level of significance were conducted on all test results. Results: Statistical analysis reveals that Super-Bond C&B had significant low mean value for flexible strength and the other three materials showed no significant difference. For modulus of elasticity, Super-Bond C&B exhibited statistically lower modulus of elasticity. G-FIX presented intermediate result, showing statistically higher modulus of elasticity than Super-Bond C&B but lower than G-aenial Universal Flo and FiltekTM Z350 XT. There was no significant difference on modulus of elasticity between G-aenial Universal Flo and FiltekTM Z350 XT. Conclusion: Using a G-FIX, the newly commercially available splinting material, which shows higher fracture resistance properties comparable to flowable and restorative composite resin and a relatively flexible nature might be a beneficial for stabilizing teeth mobility.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.317-327
• /
• 2012

The average specific cake resistance, the most important indicator for cake filtration and solid-liquid separation, is measured by filtration experiment. But the exact value is difficult to measure because of the other influences such as sedimentation during filtration. This study, a little more stable method named filtration-permeation is proposed for measuring average specific cake resistance. The filtration-permeation is composed of permeation of particle eliminated water through pre-formed cake by filtration. Using 1 wt% calcium carbonate suspension, the filtration-permeation experiments were performed for 8 kinds of filter media at the conditions of 0.5 atm and 0.2 atm, 1 and 3 sheets of filter media. At each specific condition, three to five times filtration-permeation were accomplished. As a result, stable permeation speed is measured. According to this experimental result, the characteristics of permeation and the effect of sedimentation are analyzed with Ruth's equation. The one way analysis of variance (one way ANOVA) is applied to the average specific cake resistances of filtration and permeation obtained with the selected three kinds of filter media. The average specific cake resistances between 0.5 atm and 0.2 atm by filtration do not distinguished, but those by permeation is perfectly distinguished. The experimental results during permeation have a very narrow distribution than that measured during filtration. The analysis of filtration experiments, it was verified that the resistance of filter medium by traditional method is of no significance. Finally, the migration of small particles through the medium composed of fiber glass at low pressure was studied.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.51-56
• /
• 2009

Time synchronization algorithm in wireless sensor networks is essential to various applications such as object tracking, data encryption, duplicate detection, and precise TDMA scheduling. This paper describes CDRS that is a time synchronization algorithm using the Clock Drift rate and Reference Signals between two sensor nodes. CDRS is composed of two steps. At first step, the time correction is calculated using offset and the clock drift rate between the two nodes based on the LTS method. Two nodes become a synchronized state and the time variance can be compensated by the clock drift rate. At second step, the synchronization node transmits reference signals periodically. This reference signals are used to calculate the time difference between nodes. When this value exceeds the maximum error tolerance, the first step is performed again for resynchronization. The simulation results on the performance analysis show that the time accuracy of the proposed algorithm is improved, and the energy consumption is reduced 2.5 times compared to the time synchronization algorithm with only LTS, because CDRS reduces the number of message about 50% compared to LTS and reference signals do not use the data space for timestamp.

• PNF and Movement
• /
• v.7 no.3
• /
• pp.17-27
• /
• 2009

The purpose of this study was to investigate the effect of close kinetic chain(CKC) and open kinetic chain(OKC) posion on proprioceptive neuromuscular facilitation applied to the unilateral upper extremity on the muscle activation of lower extremity. All subjects were randomly assigned to two groups: open kinetic chain group(n=5),closed kinetic chain group(n=5). All participants were PNF patterns applied on the unilateral upper extremity in all subjects were the kinetic chain(CKC) and open kinetic chain(OKC) posion on flexion/abduction/external rotation. The hold and approximation techniques for the irradiation were applied to end range. All measurements for each subject took the following tests: pre-test, post - test in 4weeks, post-testin 8weeks. EMG data was collected from the vastus medialis, tibialis anterior, biceps femoris, and gastrocnemius muscle of both lower extreamity using surface EMG system, Each EMG value in individual muscle was normalized for maximal voluntary contraction. The data were analyzed using Two-way analysis of variance(ANOVA) with repeated measures to determine the statistical significances. The results of this study are summarized as follows. First, during for close kinetic chain(CKC) and open kinetic chain(OKC) posion on PNF pattern application, all of the %MVIC values of close kinetic chain and open kinetic chain posion increased sign ificantly compared(p<0.05). Second, The close kinetic chain(CKC) and open kinetic chain(OKC) posion on PNF pattern application was significantly increased with in the intervention period(p<.05). Third, there was a no significant open kinetic chain posion on PNF pattern application of sing muscle group with in the intervention period.(p<0.05) there was a significant close kinetic chain posion on PNF pattern application of sing muscle group with with in the intervention period(p<0.05). Forth, interaction of the exercise position and muscle was also significant. Post-hoc tests revealed that the activation levels of vastus medialis muscle and tibialis anterior muscle was higher in the closed kinetic chain position(p<.05). that the activation levels of vastus medialis and gastrocnemius muscle was higher in the open kinetic chain position(p<.05). In conclusion, it was found that the application of PNF patterns to the unilateral upper extremity effect on the muscle activation of lower extremity and both open kinetic chain exercise and closed kinetic chain exercise was significantly increased muscle activity. Further studies are needed to analyzed long term effects and subjects resulting from these changed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.2
• /
• pp.45-52
• /
• 2002

An experimental investigation on the structure and dynamic behavior of two dimensional over-expanded air jets exiting into water was carried out. The hish speed digital video imaging and static pressure distribution measurement were made to characterize the structure and time-dependant behavior of the jets. Mach number at the jet exit was 2.0 and was slightly less than the value predicted by the ideal nozzle calculation. Variance of jet spreading angle at different stagnation condition was measured as a function of mass flow rate. Periodic nature of the air jet distortion in water was observed and the frequency of the repetition was approximately 5-6 Hz for all cases tested. Three characteristic length scales were defined to characterize jet structure. $L_1$, maximum width of the plume when the periodic instability occurs, $L_2$, width of the jet where secondary reverse flow entrained jet flow and $L_3$, distance from the jet exit to the location where entrainment of the secondary reverse flow occurs. The ratio of $L_1$ and $L_2$ decreased with increasing stagnation pressure, i.e. mass flow rate. $L_3$ increased with increasing stagnation pressure. The temporal behavior of static pressure measurements also showed peak around frequency of 5, which corresponds the frequency obtained by visual measurements

• The Korean Journal of Financial Management
• /
• v.2 no.1
• /
• pp.55-75
• /
• 1986

This article is to analyse the economic efficiency of capital market, which plays a role of resource allocation in terms of financial claims such as stock and bond. It provides various contributions to the welfare theoretical aspects of modern capital market theory. The key feature that distinguishes the theory described here from traditional welfare theory is the presence of uncertainty. Securities has time dimensions and the state and outcome of the future are really uncertain. This problem resulting from this uncertainty can be solved by complete market, but it has a weak power to explain real stock market. Capital Market is faced with the uncertainity because it is a kind of incomplete market. Individuals and firms in capital market made their consumption-investment decision by their own criteria, i. e. the maximization of expected utility form intertemporal consumption and the maximization of the market value of firm. We noted that allocative decisions that had to be made in the economy could be naturally subdivided into two groups. One set of decisions concerned the allocation of first-period resources among consumption $C_i$, investment in risky firms $I_j$, and riskless investment M. The other decisions concern the distribution among individuals of income available in the second period $Y_i(\theta)$. Corresponing to this grouping, the theoretical analysis of efficiency has also been dichotomized. The optimality of the distribution of output in the second period is distributive efficiency" and the optimality of the allocation of first-period resources is 'the efficiency of investment'. We have found in the distributive efficiency that the conditions for attainability is the same as the conditions for market optimality. The necessary and sufficient conditions for attainability or market optimality is that (1) all utility functions are such that -$\frac{{U_i}^'(Y_i)}{{U_i}^"(Y_i)}={\mu}_i+{\lambda}Y_i$-linear risk tolerance function where the coefficients ${\mu}_i$ and $\lambda$ are independent of $Y_i$, and (2) there are homogeneous expectations, i. e. ${\Large f}_i(\theta)={\Large f}(\theta)$ for every i. On the other hand, the efficiency of investment has disagreement about optimal investment level. The investment level for market rule will not generally lead to Pareto-optimal allocation of investment. This suboptimality is caused by (1)the difference of Diamond's decomposable production function and mean-variance valuation model and (2) the selection of exelusive investment or competitive investment. In conclusion, this article has made an analysis of conditions and processes of Pareto-optimal allocation of resources in capital marker and tried to connect with significant issues in modern finance.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.147-163
• /
• 2013

The world faces several issues of energy crisis and environmental deterioration due to over-dependence on single source of which is fossil fuel. Though, fuel is needed as ingredients for industrial development and growth of any country, however the fossil fuel which is a major source of energy for this purpose has always been terrifying thus the need for alternative and renewable energy sources. The search for alternative energy sources resulted into the acceptance of a biofuel as a reliable alternative energy source. This work presents the study of optimization of process of transesterification of vegetable oil to biodiesel using NaOH as catalyst. A $2^4$ factorial design method was employed to investigate the influence of ratio of oil to methanol, temperature, NaOH concentration, and transesterification time on the yield of biodiesel from vegetable oil. Low and high levels of the key factors considered were 4:1 and 6:1 mole ratio, 30 and $60^{\circ}C$ temperatures, 0.5 and 1.0 wt% catalyst concentration, and 30 and 60 min reaction time. Results obtained revealed that oil to methanol molar ratio of 6:1, tranesetrification temperature of $60^{\circ}C$, catalyst concentration of 1.0wt % and reaction time of 30 min are the best operating conditions for the optimum yield of biofuel from vegetable oil, with optimum yield of 95.8%. Results obtained on the characterizzation of the produced biodiesel indicate that the specific gravity, cloud point, flash point, sulphur content, viscosity, diesel index, centane number, acid value, free glycerine, total glycerine and total recovery are 0.8899, 4, 13, 0.0087%, 4.83, 25, 54.6. 0.228mgKOH/g, 0.018, 0.23% and 96% respectively. Results also indicate that the qualities of the biodiesel tested for are in conformity with the set standard. A model equation was developed based on the results obtained using a statistical tool. Analysis of variance (ANOVA) of data shows that mole ratio of ground nut oil to methanol and transesterification time have the most pronounced effect on the biodiesel yield with contributions of 55.06% and 9.22% respectively. It can be inferred from the results various conducted that vegetable oil locally produced from groundnut oil can be utilized as a feedstock for biodiesel production.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.3
• /
• pp.88-96
• /
• 2000

The objective of this study is to evaluate the preference and visual characteristic of users according to the location of benches at urban community parks. The types of benches are separated into four patterns and located in four representative places at urban community parks. Each relations between visual preference and adjective related factors are calibrated by the estimated results of Pearson correlation coefficient. Moreover, the factors which affect the visual preference are obtained by multiple regression analysis and to calibrate the each factors significant level, the method of multivariate variance analysis is applied. The results of this study are summzrized as belows: 1. Four types of factors which consist the visual characteristic are classified as emotional factor of visual images(aesthetic factor(F1), texture related factor(F2)) and physical factor(physical factor(F3), transformable factor(F4)). Each factor's eigenvalue is appears as 5.27∼1.78 and the eigenvalue of emotional factor of visual images is more higher than the physical factor. 2. The correlation coefficient between visual preference according to the location of benches(X21) and aesthetic factor(f1) is estimated as 0.79, which is highest value among the four factors. And the correlation coefficient of texture related factor(f2), physical factor(F3) and transformable factor(F4) is estimated as 0.14, 0.04 and 0.08 respectively. 3. The visual preference of users according to the location of benches is greatly affected by the emotional factor of visual images(F1, F2) and the physical factor(F3, F4) are poorly related. The results of this study suggest the effective guidelines for the location of leisure facilities. Moreover the design and planning of leisure facilities at the urban community park have to be reexamined. What must be examined from now on is as follows: First, the preference research of rest facilities in the urban park through the multiple approach must be carried out continuously. Second, the research about the visual quality of the environmental sight observed in sitting on the bench as well as the visual quality of the showed object and place needs to be supported. Nevertheless, through this study the utilization into the useful data of the plan and the design for the systematic disposition of landscape architecture equipments centered on the users can be expected.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.419-436
• /
• 2006

PURPOSE: The purpose of this study was to explore dental hygiene treatment fear and anxiety in dental patients. METHODS: The sample consisted of 466 dental patients who had received the dental hygiene treatment at 8 Dental Hospitals and Clinics in Daegu city between March and August 2006 studied. Dental hygienists recruited a questionnaire, which includes generalized anxiety sub-scale(4 items), specific fear sub-scale(5 items), distrust sub-scale(5 items), and catastrophic anxiety sub-scale(4 items). Minimum score is 1, and maximum score is 5. The research was designed to be a cross-sectional measured study. SAS statistical software was used for the analysis. The characteristics of the study sample were described by mean and standard deviation(SD) for continuous variables and by frequency and percentage for categorical variables. The Student's t-test and analysis of variance(ANOVA) were used to compare fear and anxiety score in demographic variables. A Pearson's correlation analysis was conducted for relationship among values of fear and anxiety for dental hygiene. Multiple regression analysis was performed to determine the factors associated with fear and anxiety related with dental hygiene. RESULTS: A total of 466 dental patients were analyzed, their average age${\pm}$SD was $37.7{\pm}12.9$ years(range: 15-79 yr). The mean value for dental hygiene fear and anxiety was 2.70(generalized anxiety 2.65, specific fear 2.93, distrust anxiety 2.72, and catastrophic anxiety 2.42, respectively). There was a statistically significant difference in gender(p<0.05), 2.81 for women was higher than 2.55 for men(p=.0000). The older we are, the higher fear and anxiety for dental hygiene treatment were. that is, under age of 20 years 2.49, 20 years 2.59, 30 years 2.69, 40 years 2.77, 50 years 2.88, 60 years 2.69, and over age of 70 2.45, respectively(p=.0321). Factors related to dental hygiene treatment fear and anxiety by multiple regressions were gender(${\square}$=0.18, p=0.0001), age(${\square}$=.07, p=.0058), and the time when visits dentist recently(${\square}$=.07, p=.0058). CONCLUSIONS: In conclusion, gender, age and the time when visits dentist recently were significantly associated with dental hygiene treatment fear and anxiety. We recommend that further research should investigate a dental hygiene treatment fear and anxiety by using more follow-up study.

• Korean Security Journal
• /
• no.61
• /
• pp.235-254
• /
• 2019

This study identifies a factor structure regarding the criterion of terror awareness by using confirmatory factor analysis. The study provides information whether the criterion fits in the analysis of terror awareness in Korea or not. Data of 176 public officials working at the National Assembly collected in 「Study on the Improvement of Security in the National Assembly Building」(Choi O-Ho and others, 2016) was used in the analysis. Study results showed the fit statistics of 3 questions regarding concern in terror, 5 questions regarding cognition of terror occurrence, 3 questions regarding countermeasure of terror, and 3 questions regarding equipments against terror satisfied the standard. Also, standard regression coefficient exceeded the standard and was shown to be fit. Concern in terror, as a latent variable, was below the standard value of average variance extracted. However, focused validity was secured by obtaining other values fit. This study proceeded distinct validation test to supplement data. The test results showed that the criterion level was fit. Thus, further survey should include questions that are appropriate to measure the awareness of terror based not only on theories and previous studies but also on questions of terror awareness tested in this study. Such development in surveys will support the means of data measurement.