• Korean Chemical Engineering Research
• /
• 제55권5호
• /
• pp.723-730
• /
• 2017

폐감귤박으로 제조한 활성탄(WCAC)에 의한 2,4-디클로로페놀(2,4-DCP) 흡착에서 온도, 초기농도, 접촉시간 및 흡착제 투여량과 같은 운전변수의 영향을 조사하기 위해 회분식 실험 및 반응표면분석법(Response Surface Methodology: RSM)을 적용하였다. 2,4-DCP 흡착부터 도출된 회귀식은 반응변수의 함수로 나타낼 수 있었다. 이 모델의 적합성은 응답에 대한 실험값과 예측값 간의 상관관계에 의해 평가되었다. $R^2$ 값은 0.9921로서 높은 상관성을 가지며, 회귀 모델에 의해 대부분의 데이터 변동을 설명할 수 있었다. 독립변수 및 그 상호작용의 유의성은 분산분석(ANOVA)과 t-검정 통계 기법으로 평가하였다. 이들 결과는 사용된 모델이 응답변수를 유의미하게 잘 부합되며, 응답과 독립 변수 간의 관계를 적합하게 잘 설명한다는 것을 보여 주었다. 흡착 속도 및 등온 실험결과는 각각 유사 2차 속도식 및 Langmuir 등온 모델에 의해 잘 설명될 수 있었다. Langmuir 등온 모델로부터 계산된 WCAC에 의한 2,4-DCP의 최대 흡착량은 345.49 mg/g이었다. 흡착과정에서 막확산과 입자내부확산이 동시에 일어나는 것을 흡착 메커니즘 연구로부터 확인하였다. 열역학적 파라미터는 WCAC에서 2,4-DCP의 흡착 반응이 흡열반응이고 자발적인 과정임을 나타내었다.

• 구강회복응용과학지
• /
• 제31권4호
• /
• pp.301-309
• /
• 2015

목적: 무치악 부위를 임플란트 보철로 수복하면 기능저하 상태였던 대합치는 생리적인 자극을 받게 된다. 본 연구는 하악 구치부 임플란트에 대합되는 상악치아의 골변화를 평가하였다. 연구 재료 및 방법: 보철물 장착시(기준점) 및 3, 6개월 후에 방사선 사진을 채득하였다. 맞춤형 필름유지기구를 제작하여 대합치의 연속적인 방사선 사진에 대한 투사를 표준화하였다. 디지털사진에서 관심부위에 대한 그레이수치를 시간별로 측정하여 95% 유의수준으로 반복측정분산분석으로 통계적 유의성을 검증하였다. 결과: 대합치의 그레이수치는 시간이 흐름에 따라 증가하였다. 치조정부위보다 중앙부위의 변화가 더 컸으나 근심과 원심의 그레이수치는 큰 차이를 나타내지 않았다. 그레이수치의 변화는 하중을 가하지 않았던 기간에 따라 다른 양상을 나타내었다. 결론: 기능저하였던 치아주변의 골조직에 기능적 하중이 가해지면 골조직의 변화가 발생할 수 있는 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제27권6호
• /
• pp.632-643
• /
• 2002

The purpose of this study was two-fold. First was to evaluate whether the molecular sieving model was appropriate for ionic dissociation experiment. Second was to compare the dissociation of calcium and hydroxyl ions from five types of calcium hydroxide pastes (Pure calcium hydroxide paste, DT temporary $dressing^{\circledR},{\;}Metapaste^{\circledR},{\;}Chidopex^{\circledR},{\;}Metapex^{\circledR}$) in three vehicles (aqueous, viscous and oily) and the antibacterial effect. Each calcium hydroxide pastes was placed into 0.65ml tube with cap and then 15% polyacrylamide gel was placed onto calcium hydroxide pastes. After the gel was hardened, the tubes were filled with tridistilled water (pH 7.14) and closed with cap. The tubes were stored in $37^{\circ}C$ 100% incubator The pH reading and the concentration of calcium ions were taken at 1, 4, 7. 10, and 14 days. The brain heart infusion agar plates with S. mutans and A. actinomycetemcomitans were used far antibacterial activity test. Middle of agar plate was filled with the calcium hydroxide pastes. The plates were incubated at $37^{\circ}C$ and observations were made to detect the zones of inhibition. These data were evaluated statistically by use of the analysis of variance and duncan test. The results were as follows. 1. In fresh mixing state, the pH of five types of calcium hydroxide pastes were measured between 12.5 and 12.8. 2. The pH was increased in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (11.45) and DT temporary $dressing^{\circledR}$ (11.33) showed highest pH, followed by $Metapaste^{\circledR}$ (9.49), $Chidopex^{\circledR}$ (8.37) and $Metapex^{\circledR}$ (7.59) 3. Calcium was higher in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (137.29 mg%) and DT temporary $dressing^{\circledR}$ (124.6 mg%) showed highest value, followed by $Metapaste^{\circledR}$ (116.74 mg%), $Chidopex^{\circledR}$ (111.84 mg%) and $Metapex^{\circledR}$ (60.22 mg%). 4. The zones of bacterial inhibition were seen around all five types of calcium hydroxide pastes. $Chidopex^{\circledR}{\;}and{\;}Metapex^{\circledR}$ groups which include iodoform were observed significantly larger zone of inhibition in A. actinomycetemcomitans compared with the other calcium hydroxide groups (p<0.05) However, $Metapex^{\circledR}$ showed the least antibacterial effect on S. mutans compared with other groups (p<0.05). The molecular sieving model was found to be acceptable in dissociation experiment of hydroxyl and calcium ions when compared with the previous tooth model study. But this model was not appropriate for the antibacterial test.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.263-273
• /
• 2007

Statement of problem: Alteration of tooth function is assumed to be changed by stress/strain on the adjacent alveolar bone, producing changes in morphology similar to those described for other load-bearing bones. When teeth are removed, opposing teeth will not be functioned. When edentulous area is restored by implant prostheses, opposing teeth will be received physiologic mechanical stimuli. Purpose: The aim of this study was to evaluate the bone changes around the teeth opposing implant restoration installed mandibular posterior area. Material and method: Eight patients who had mandibular posterior edentulous area were treated with implants. Radiographs of the opposing teeth were taken at implant prostheses delivery(baseline), 3 months, and 6 months later. Customized film holding device was fabricated to standardize the projection geometry for serial radiographs of opposing teeth. Direct digital image was obtained. Gray values of region of interest at each digital image were measured and compared according to time lapse. Repeated measured analysis of variance and post-hoc Scheffe's test were performed at the 95% significance level. Results: Alveolar bone changes around the natural teeth opposing the posterior implant in mandible showed statistically significant difference compared to control group(P<0.05). And gray values of alveolar bone around the teeth opposing implants were increased. There were no statistically significant differences of alveolar bone changes between crestal group and middle group and between mesial group and distal group according to time lapse(P>0.05). There were no statistically significant differences of alveolar bone changes among mesial-crestal group, mesial-middle group, distal-crestal group, distal-middle group, and control group(P>0.05). Conclusion: Alveolar bone around the natural teeth opposing the implant prosthesis showed gradual bony apposition.

• 한국전문물리치료학회지
• /
• 제10권3호
• /
• pp.29-40
• /
• 2003

The purpose of this study was to compare the muscle activity during a push-up on a suspension sling and a fixed support at the same level. Tests were performed on 15 male subjects. Electromyography using a surface EMG recorded the activity of the triceps, pectoralis major, and internal and external oblique muscles during each push-up. EMG activity was recorded at 0, 45, and 90 degrees of elbow flexion in the push-up position on a suspension sling or a fixed support at the same height above the floor (30 cm). The testing order was selected randomly. The subjects were asked to maintain the push-up position with straight knees, hips, and trunk for 5 seconds at each elbow angle. The mean root mean square (RMS) of EMG activity was calculated. EMG activity was normalized using the maximum voluntary isometric contractιn elicited using a manual muscle testing technique. Two-factor repeated measures analysis of variance (ANOVA) was used to compare the average RMS value of EMG activity for each condition. The EMG activity for the pectoralis major, and internal and external oblique muscles during a push-up on a sling was significantly higher than on a fixed support at all angles of elbow flexion (p<.01). There were significant differences in the EMG activity of the pectoralis major and triceps brachii muscles at difference angles of elbow flexion (p<.05). The pectoralis major muscle had the highest EMG activity at 90 degrees of elbow flexion on both the sling and fixed support. The triceps brachii muscle had the highest EMG activity at 45 degrees of elbow flexion on both the sling and fixed support. The internal and external oblique muscles had the highest EMG activity at 0 degrees of elbow flexion, although the difference with angle of flexion was not significant. These results suggest that to improve proximal and trunk stability and muscle strength, push-ups are more useful when performed on a suspension sling than On a fixed support.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권4호
• /
• pp.417-424
• /
• 2010

The purpose of this study was to detect significant SNPs for carcass quality traits using DNA chips of high SNP density in Hanwoo populations. Carcass data of two hundred and eighty nine steers sired by 30 Korean proven sires were collected from two regions; the Hanwoo Improvement Center of National Agricultural Cooperative Federation in Seosan, Chungnam province and the commercial farms in Gyeongbuk province. The steers in Seosan were born between spring and fall of 2006 and those in Gyeonbuk between falls of 2004 and 2005. The former steers were slaughtered at approximately 24 months, while the latter steers were fed six months longer before slaughter. Among the 55,074 SNPs in the Illumina bovine 50K chip, a total of 32,756 available SNPs were selected for whole genome association study. After adjusting for the effects of sire, region and slaughter age, phenotypes were regressed on each SNP using a simple linear regression model. For the significance threshold, 0.1% point-wise p value from F distribution was used for each SNP test. Among the significant SNPs for a trait, the best set of SNP markers were selected using a stepwise regression procedure, and inclusion and exclusion of each SNP out of the model was determined at the p<0.001 level. A total of 118 SNPs were detected; 15, 20, 22, 28, 20, and 13 SNPs for final weight before slaughter, carcass weight, backfat thickness, weight index, longissimus dorsi muscle area, and marbling score, respectively. Among the significant SNPs, the best set of 44 SNPs was determined by stepwise regression procedures with 7, 9, 6, 9, 7, and 6 SNPs for the respective traits. Each set of SNPs per trait explained 20-40% of phenotypic variance. The number of detected SNPs per trait was not great in whole genome association tests, suggesting additional phenotype and genotype data are required to get more power to detect the trait-related SNPs with high accuracy for estimation of the SNP effect. These SNP markers could be applied to commercial Hanwoo populations via marker-assisted selection to verify the SNP effects and to improve genetic potentials in successive generations of the Hanwoo populations.

• 한국발생생물학회지:발생과생식
• /
• 제4권2호
• /
• pp.147-152
• /
• 2000

본 연구는 은어의 clone을 생산하여 생리적 형질에 대한 유전적 특성을 조사하고 또 clone의 유전율을 추정했다. 성숙한 완전 동형접합형 자성발생 2배체(난할형 2배체)에서 채란한 후 자성발생을 반복하여 4계통의 clone을 생산하였으며 부화 전부터 같은 수조에 혼합하여 사육하였다. 10개월간 사육한 후 사육수조의 수심을 낮추었을 때의 스트레스가 clone의 혈액성상과 유전율에 미치는 영향에 대해서 조사했다. 생산된 각 계통의 clone은 실험에 사용하기 전에 DNA fingerprint법을 이용하여 유전적 균질성을 확인한 후 스트레스어와 비스트레스어의 hematocrit 값, hemoglobin량, 적혈구수 및 평균적 혈구용적 (MCV)을 측정하였다. 비스트레스어에서 측정한 hematocrit값과 MCV에서 각 clone간에 유의차가 인정되었다. 실험어는 모두 같은 환경에서 사육하였기 때문에 이러한 유의차는 주로 각 clone의 유전적인 차이를 반영한 것으로 생각한다. 스트레스 반응률 (SRR)은 기대값보다 낮았으며 유전율 (h$^2$)은 비스트레스 group에서는 평균 0.238로 높았으나 스트레스 group에서는 매우 낮거나 거의 0에 가까웠다. 따라서 혼합 사육한 clone 계통은 생리적 형질의 유전적 특성을 조사하는데 좋은 수단이 된다. 또한 선발 육종의 선발형질로서도 유용하다.

• 원예과학기술지
• /
• 제35권4호
• /
• pp.446-455
• /
• 2017

본 연구는 참외의 소비자 기반 품질 지표를 제공하기 위하여 이화학적 특성 및 관능 특성을 조사하였다. 참외는 착과 후 20일, 25일, 그리고 30일에 수확하였으며, 각 수확 시기에 따라 부피별로 소, 중, 대를 구분하여 총 9그룹의 특성을 분석하였다. 착과 후 25일 및 30일에 수확된 그룹은 20일에 수확된 그룹에 비하여 CIE $a^*$와 $b^*$값, 그리고 가용성 고형분 함량(SSC)이 높았으며, CIE $L^*$값과 경도는 낮았다. 또한 착과 후 25일 및 30일에 수확된 그룹은 전반적인 기호도가 높았다. 특성간 상관성 분석결과 이화학적 특성(CIE 값, SSC, 산도, 그리고 경도)과 전반적인 기호도는 1% 유의수준에서 상관성이 있었다. 관능 특성 평가결과 수확 시기가 늦을수록 당도와 황색도는 높고 경도는 낮았으며, 이러한 특성은 전반적인 기호도의 증가와 연관이 있었다. 주성분 분석결과 제 1주성분과 제 2주성분은 각각 62.16%와 17.91%의 설명력을 보여주었으며 전체 설명력은 80.07%였다. 제 1주성분 점수의 변화 경향을 활용하여 전반적인 기호도와 직선회귀식을 산출한 결과 $r^2$은 0.87이었다. 본 실험결과 이화학적 특성인 CIE 값과 SSC, pH, SSC/적정 산도(TA) 및 경도와 관능적 품질 특성인 과피의 황색도, 향, 풍미, 단맛, 조직감, 이미, 그리고 태좌부의 상태를 참외의 품질지표로 활용하여 소비자 기호도 예측이 가능하였다.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.321-338
• /
• 1996

The purpose of this study was to evaluate the effect of moistening and air-drying of acid conditioned dentin and enamel on the marginal microleakage. In this study, Class V cavity were prepared on both buccal and lingual surface of sixty extracted human premolars with cementum margin. These specimens were randomly devided into three groups and three dentin adhesives(Scotchbond Multi-Purpose, All bond 2, Prisma Universal Bond 3) were applied to each group. The specimens in each group were subdevided into four groups (Wet/primed, Dry/primed, Wet/not primed, Dry/not primed) and the etched dentin and enamel surface were treated these four surface treatments prior to the placement of a bonding agent or adhesive. Wet/primed group was simply blot-dried with a damp facial tissue before primer placement ; Dry/primed group was air dried for 30 seconds before the placement of a primer ; Wet/not primed group and Dry/not primed group were not primed after blot dried and air dried for 30 seconds each group. The bonding agent and composite resin were applied for each group. All specimens were exposed to 500 cycle of thermal stress. Specimens were placed in a silver nitrate solution and then sectioned buccolingually through the center of the restoration. The dye penetrations of the specimens were observed with a stereo microscope. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The aspects of silver ion penetration into the resin/dentin interface were examined under scanning electron microscopy. The results were as follows. 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. Regardless of various surface treatment and dentin adhesives, there was no significant difference at the enamel margins (p>0.05). 3. At the dentin margins, the leakage values of Dry/not primed group showed significantly higher than that of the other groups (p<0.05). The leakage values of Wet/primed group showed significantly lower than that of the other groups, but, there was no significant difference between Wet group and Dry group. 4. There was no significantly difference between the dentin adhesives regarding the surface treatments in all groups(p>0.05). 5. On the backscatterd scanning electron microscopy observation, the penetration of the silver ion occured at the bonding resin/dentin interface. In the Wet/primed group, resindentin hybrid zone and resin penetration into the dentin was observed. The resin tags were compactively formed to a thickness of $3\sim4{\mu}m$ at the upper part of dentinal tubules. In the Dry/primed group, the thickness of the hybrid zone and the diameter, depth of the resin tags diminished. In the Non-primed groups, the hybrid zone was not identified and few resin tag was observed. There was the gap formation in the resin/dentin interface.

• Journal of Periodontal and Implant Science
• /
• 제41권1호
• /
• pp.17-22
• /
• 2011

Purpose: Nitric oxide (NO) has been known as an important regulator of osteoblasts and periodontal ligament cell activity. This study was performed to investigate the relationship between NO-mediated cell death of human periodontal ligament fibroblasts (PDLFs) and N-methyl-D-aspartic acid (NMDA) receptor antagonist (+)-5-methyl-10, 11-dihydro-5H-dibenzo[a,d]cyclohepten-5, 10-imine hydrogen maleate (MK801). Methods: Human PDLFs were treated with various concentrations (0 to 4 mM) of sodium nitroprusside (SNP) with or without $200\;{\mu}M$ MK801 in culture media for 16 hours and the cell medium was then removed and replaced by fresh medium containing MTS reagent for cell proliferation assay. Western blot analysis was performed to investigate the effects of SNP on the expression of Bax, cytochrome c, and caspase-3 proteins. The differences for each value among the sample groups were compared using analysis of variance with 95% confidence intervals. Results: In the case of SNP treatment, as a NO donor, cell viability was significantly decreased in a concentration-dependent manner. In addition, a synergistic effect was shown when both SNP and NMDA receptor antagonist was added to the medium. SNP treated PDLFs exhibited a round shape in culture conditions and were dramatically reduced in cell number. SNP treatment also increased levels of apoptotic marker protein, such as Bax and cytochrome c, and reduced caspase-3 in PDLFs. Mitogen-activated protein kinase signaling was activated by treatment of SNP and NMDA receptor antagonist. Conclusions: These results suggest that excessive production of NO may induce apoptosis and that NMDA receptor may modulate NO-induced apoptosis in PDLFs.