• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.53-60
• /
• 2020

In this paper, We have studied the structure of a Telemetry Transmitter capable of transmitting variable data rates. This paper proposed a structure combining variable pre-modulation filter with cutoff characteristic with variable input sample rate converter. Variable pre-modulation filter has the same characteristics as pre-modulation filter and is converted to a constant sampling rate without structural changes according to the variable input data rate. We propose a software program that actively controls variable pre-modulation filter and variable input sample rate converter to respond to real-time changing data.

• Journal of Korean Society for Quality Management
• /
• v.33 no.4
• /
• pp.117-122
• /
• 2005

Variable sampling rate(VSR) scheme varies the sampling rate for the current sample depending on the previous value of the control statistic. In this paper, we propose EWMA control charts with variable parameter(VP) scheme, which allows both the sample rate(the sample size or the sampling interval) and the weight to vary. We investigate the effectiveness of the VP scheme relative to the fixed parameter(FP) scheme and the VSR scheme in EWMA control charts. It is shown that using the VP scheme gives some improvements to the ability in detecting small and moderate shifts in the process normal mean.

• Journal of Korean Society for Quality Management
• /
• v.32 no.4
• /
• pp.252-264
• /
• 2004

Variable sampling Interval (VSI) control charts vary the sampling interval according to value of the control statistic while the sample size is fixed. It is known that control charts with 2-state VSI scheme, which uses only two sampling intervals, give good statistical properties. Variable sample size (VSS) control charts vary the sample size according to value of the control statistic while the sampling interval is fixed. In the VSS scheme no optimal results are known for the number of sample sizes. It is also known that the variable sampling rate (VSR) $\bar{X}$ control chart with 2-state VSS and 2-state VSI scheme leads to large improvements In performance over the fixed sampling rate (FSR) $\bar{X}$ chart, but the optimal number of states for sample size Is not known. In this paper, the VSR Χ charts with multi-state VSS and 2-state VSI scheme are designed and compared to 2-state VSS and 2-state VSI scheme. The multi-state VSS scheme is considered to, achieve an additional improvement by switching from the 2-state VSS scheme. On the other hand, the multi-state VSI scheme is not considered because the 2-state scheme is known to be optimal. The 3-state VSS scheme improves substantially the sensitivity of the $\bar{X}$ chart especially for small and moderate mean shifts.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.3
• /
• pp.429-440
• /
• 2003

Variable sampling rate (VSR) control charts vary the sampling interval and/or the sample size according to value of the control statistic. It is known that $\bar{X}$ charts with VSR scheme lead to large improvements in performance over those with fixed sampling rate (FSR) scheme. In this paper, we studied $\bar{X}$ charts with several VSR schemes, and compared their statistical performance each other.

• The Korean Journal of Applied Statistics
• /
• v.30 no.6
• /
• pp.993-1004
• /
• 2017

A stratified sampling method is generally used with a sample selected using the same sample weight in each stratum in order to improve the accuracy of the sampling survey estimation. However, the weight should be adjusted to reflect the response rate if the response rate is affected by the value of the variable of interest. It may be also more effective to adjust the weights by subdividing the stratum rather than using the same weight if the variable of interest has a linear relationship with the continuous auxiliary variables. In this study, we propose a method to increase the accuracy of estimation using an informative sampling design technique when the response rate is an exponential function of the variable of interest and the variable of interest has a linear relationship with the auxiliary variable. Simulation results show the superiority of the proposed method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1750-1754
• /
• 2013

A variable bit rate speech coder is presented. The coder is based on the observation that a speech signal can be viewed as a combination of piecewise linear signals in a short time period. The encoder detects the sample points where the slope of the signal changes, which are called the inflection points in this paper. The coder transmits the location and value for the detected inflection sample, but only the location information for the noninflection samples. In the decoder, the noninflection samples are estimated with interpolation of the received information. Several factors affecting the performance of the coder have been tested through simulation. Simulation results show that the linear interpolation produces 1 ~ 5 dB improvement over the cubic spline interpolation. And the -law companding does not provide any benefit when it is applied before the inflection detection. With low threshold values in the inflection point detection, the coder shows better MOS and more than 16 dB improvement in SNR compared to the continuously variable slope delta modulation (CVSDM).

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.2
• /
• pp.443-449
• /
• 2017

Estimation of population proportion like the distribution rate of LED TV and the prevalence of a disease are often estimated based on survey sample data. Population proportion is generally considered as a special form of population mean. In complex sampling like stratified multistage sampling with unequal probability sampling, the denominator of mean may be random variable and it is estimated like ratio estimator. In this research, we examined the estimation of distribution rate based on stratified multistage sampling, and determined some numerical outcomes using stratified random sample data with about 25% of missing observations. In the data used for this research, the survey weight was determined by deterministic way. So, the weights are not random variable, and the population distribution rate and its variance estimator can be estimated like population mean estimation. When the weights are not random variable, if one estimates the variance of proportion estimator using ratio method, then the variances may be inflated. Therefore, in estimating variance for population proportion, we need to examine the structure of data and survey design before making any decision for estimation methods.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.562-565
• /
• 2013

A new variable rate speech coding technique is proposed. The method is based on the observation that the speech signal approximately looks linear for a very short period of time. The information transmitted is the location and data value of inflection points. If the distance between the inflection points is large, the mid point location and its data value are also delivered. Thus, the encoder transmits both the location and the data value for the inflection samples, but the location only for the non-inflection points. The location information is expressed using one bit for each sample, 0 for non-inflection and 1 for inflection point. At the receiver, using the interpolation, the decoder estimates the untransmitted sample values for non-inflection locations from the received sample values for the inflection samples. With 50 % of computational cost of the existing CVSD delta modulation, the proposed method is expected to achieve the data rate of 36 to 38 kbps and the SNR of 10 to 13 dB.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.363-369
• /
• 2021

In this paper, We propose variable cut-off frequency and variable sample rate small-area multi-channel digital filter for telemetry system. Proposed digital filter reduced hardware area by implementing filter banks that can variably use cut-off frequency and sample rate without additional filter banks for an arbitrary cut ratio. In addition, We propose the architecture in which sample rate can variably be selected according to the number of filters that pass through the multiplexer control. By using time division multiplexing (TDM) supported by the finite impulse response (FIR) intellectual property (IP) of Quartus, the proposed digital filter can greatly reduce digital signal processing (DSP) blocks from 80 to 1 compared without TDM. Proposed digital filter calculated order and coefficients using Kaiser window function in Matlab, and implemented using very high speed integrated circuits hardware descryption language (VHDL). After applying to the telemetry system, we confirmed that the proposed digital filter was operating through the experimental results in the test environment.

• The Korean Journal of Financial Management
• /
• v.20 no.1
• /
• pp.279-304
• /
• 2003

This study presents some empirical results on variable rate deposit insurance premium in Korea. The study estimates deposit insurance premium for all insured financial institutions in Korea using Ronn and Verma(1986) model which is based on Merton(1977)'s option pricing model. The sample period is 1995-2001 and the study includes trend analysis and cross-sectional analysis for premium estimation. The study also includes the correlation analysis between the estimates and profitability and capitalvariables such as BIS capital ratios, ROE and ROA. The results show that the estimates differ across financial institutions and sample periods. Thus it supports that each deposit premium should reflect its own risks. It also supports the necessity for the system of variable rate deposit insurance premium.