• 오토저널
• /
• 제15권3호
• /
• pp.36-46
• /
• 1993

In CVT vehicle, the engine speed is completely decoupled from the vehicle speed within the range from maximum transmission ratio to minimum transmission ratio. This allows the engine to operate in optimal state(e.g. best fuel economy or maximum power mode.) In this study, the CVT control algorithm for optimal operation of engine is suggested. In order to implement the real time digital control of electro-hydraulic CVT system, a software called CVTCON has been developed. CVTCON also includes the CVT operation module, (2) system test module, (3) system control module and (4) data management module. By using the CVTCON and the electro-hydraulic CVT system, two modes of experiments were carried out: constant throttle opening mode and acceleration mode. From the experimental result, it was found that the algorithm suggested in this study showed optimal operation of the CVT system.

• 반도체디스플레이기술학회지
• /
• 제12권4호
• /
• pp.27-32
• /
• 2013

In this paper, the boost converter was implemented by digital control in many applications of the step-up. The PWM(pulse width modulation) control module of boost converter was digitized at power converter using the FPGA device and VHDL. The boost converter was designed to output a fixed voltage through the PI control algorithm of the PWM control module even if input voltage and output load are variable. The boost converter was digitized can be simplified by reducing the size of the module and the external control components. Thus, the digital power IC has advantageous for weight reduction and miniaturization of electronic products because it can be controlled remotely by setting the desired output voltage and PWM control module. The boost converter using the digital power IC was confirmed through experiments and the good performances were showed from experiment results.

• 대한전기학회논문지
• /
• 제38권8호
• /
• pp.585-592
• /
• 1989

This paper presents an efficient algorithm for the reactive planning of transmission network under normal operating conditions. The optimal operation of a power system is a prerequisite to obtain the optimal investment planning. The operation problem is decomposed into a P-optimization module and a Q-optimization module, but both modules use the same objective function of generation cost. In the investment problem, a new variable decomposition technique is adopted which can operate the operation and the investment variables. The optimization problem is solved by using the gradient projection method (GPM).

• 천문학논총
• /
• 제11권1호
• /
• pp.243-250
• /
• 1996

Data acquisition system mounted on the Solar Flare Telescope at Bohyunsan Optical Astronomy Observatory is briefly described. The system is made up with CCD cameras, an image processor, a PCI-type PC and a SUN workstation. The image processor, MVC 150/40 comprises a variable scan acquisition module, an image manager and a binary correlator computational module. A typical polarization image of a sunspot is presented to demonstrate performance of the system.

• 한국지능시스템학회논문지
• /
• 제17권1호
• /
• pp.52-57
• /
• 2007

본 논문은 실시간 음성인식명령으로 구동되는 지능형 이동기제어시스템을 제안한다. 제안된 이동기제어시스템은 메인모듈, 음성인식모듈, 모터구동모듈, 센서모듈로 구성된다. 80C196KC로 구현된 메인모듈에서 퍼지논리가 적용된 지능형 제어시스템을 제안한다. 사용자의 몸무게 및 여러 가지 주변 환경요인들에 의한 비선형성을 개선하기 위해서 피드백제어가 가능한 모터구동모듈과 센서모듈이 구현된다. 또한 제안된 시스템에서 이동로봇의 제어를 위한 9개의 단어를 사용하여 동작을 테스트하였고, 제어입력으로 음성명령과 조이스틱 사용 시 이동로봇의 성능을 평가하였다.

• 한국강구조학회 논문집
• /
• 제12권5호통권48호
• /
• pp.475-485
• /
• 2000

본 연구에서는 시공성을 고려한 변단면을 갖는 합성형 강상자형교의 최소비용을 구하기 위한 자동화 최적설계 프로그램을 개발하였다. 강상자형교 설계에 필요한 설계 제약조건은 도로교 표준 시방서를 비롯한 각종 설계기준과 실무자의 경험을 바탕으로 정식화하였다. 최적화의 효율성을 위해 강상자형교의 특성을 고려한 제약조건 소거기법, 설계 변수 연결기법, 응력 재해석 기법을 적용하였다. 본 연구에서 개발된 프로그램은 구조해석 모듈, 최적설계모듈, 사용자의 입력 편의를 위한 전처리모듈 설계 업무자동화를 위한 후처리모듈로 구성되어 있으며, 구조해석은 신뢰성이 입증된 상업용 구조해석 프로그램인 RM-SPACEFRAME을 이용하여 격자모델에 대해 실시하도록 하였다. 또한 개발된 최적 설계 프로그램의 효율성과 실용성을 확인하기 위하여 몇 가지의 수치예제를 적용하였다. 본 연구에서 개발된 최적설계 시스템은 향후 타 형식의 교량에 최적설계 프로그램의 모형으로 활용될 수 있으리라 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제28권4호
• /
• pp.539-548
• /
• 2007

In the paper, a wireless charger with the function of auto-shutdown for fully implantale middle ear hearing devices (F-IMEHD) has been designed. The wireless charger can communicate with an implant module to be turned off automatically shutdown after an internal rechargeable battery has been fully-charged by electromagnetic coupling using two coils. For the communication with an implant module, the wireless charger uses the load shift keying (LSK) method. But, the variation of the mutual inductance due to the different distance between two coils can cause the communication error in receiving the fully-charged signal from an implant module. To solve the problem, the implemented wireless charger has a variable reference generator for LSK communication. The wireless charger generates proper level of the reference voltage for a comparator using an ADC (analog-to-digital converter) and a DAC (digital-to-analog converter). Through the result of experiment, it has been confirmed that the presented wireless charger can detect signals from implantable module. And wireless charger can stop generating electromagnetic flux after an implanted battery has been fully charged in spite of variable coil distance according to different skin thickness.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.97-103
• /
• 2013

This paper describes the characteristics of Electronic Throttle Controller (ETC) module in BLDC motor without the hall sensor for detecting a rotor position. The proposed ETC control system, which is mainly consisted of a BLDC motor, a throttle plate, a return spring and reduction gear, has a position sensor with an analogue voltage output on the throttle valve instead of BLDC motor for detecting the rotor position. So the additional commutation information is necessarily needed to control the ETC module. For this, the estimation method is applied. In order to improve and obtain the high resolution for the position control, it is generally needed to change the gear ratio of the module or the electrical switching method etc. In this paper, the 3-phase switching between successive commutations is adapted instead of the 2-phase switching that is conventionally used. In addition, the position control with a variable PI gain is applied to improve a dynamic response during a transient period and reduce vibration at a stop in case of matching position reference. The mentioned method can be used to estimate the commutation state and operate the high-precision position control for the ETC module and the high response characteristics. The validity of the proposed method is examined through the experimental results.

• 새물리
• /
• 제68권11호
• /
• pp.1215-1224
• /
• 2018

Most solar photovoltaic (PV) modules frequently get shadowed, completely or partially, resulting in a reduction of PV generation. This paper presents and compares the results from simulations and experimental measurements of the power output from a single PV module under various shading conditions. The study was carried out with a 90 W PV module and a 250 W PV module. The shaded area was increased from 0 to 100% for both variable and constant irradiances to analyze the effect of fluctuations in the solar irradiance certain shading conditions. The effect of shading for irradiance levels from 100 to $900W/m^2$ was investigated. Results showed that for every $100W/m^2$ decrease in the solar irradiance level, the power output decreased by 9, 0.7 and 1.5 W at 0, 25 and 50% shading, respectively. For solar irradiance levels higher than $500W/m^2$, the temperature increased by 1.6, 2.7 and $1.1^{\circ}C$ at 0, 25 and 50% shading, respectively, for every $100W/m^2$ increase in the irradiance.

• 한국정보통신학회논문지
• /
• 제23권5호
• /
• pp.487-494
• /
• 2019

소형인공위성 전력시스템체계 설계 및 개발방법은 태양풍 자계인 우주환경의 영향에 따라 기술적 제약이 큰 편이다. 이를 극복하기 위해 최근 전력모듈을 융합화와 유닛화 단계별 개발 방식으로 변화 하고 있다. 모듈화 단계에서는 탑재체 전력공급 모듈 요구조건과 함께 유니버설미들웨어를 사용하여 융합하였다. 융합모듈화대상은 탑재체에서 전력분배, 부하관리, 서브유닛의 전원공급체계와 지속성을 고려한 최종모듈 설계 및 개발 단계를 범위로 한다. 본 연구는 위성본체에서 공급되는 전력모듈을 유니버설미들웨어 기반으로 전력모듈의 정밀성과 수요처모듈데이터를 컨텐츠화 하였다. 이 동적시스템과 전력서비스 모듈화는 전력분배모듈과 전원공급모듈간 상호작용으로 Range Control 알고리즘으로 제어된다. 그리하여 전력모듈 설계단계에서 탑재체 전력수요 변수의 변동성에 따른 불확실성을 해소하고 설계의 효율성을 제시하였다.