• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.137-146
• /
• 2009

We present a micromechanical digital-to-analog (DA) variable capacitor using a parallel digital actuator array, capable of accomplishing high-Q tuning. The present DA variable capacitor uses a parallel interconnection of digital actuators, thus achieving a low resistive structure. Based on the criteria for capacitance range ($0.348{\sim}1.932$ pF) and the actuation voltage (25 V), the present parallel DA variable capacitor is estimated to have a quality factor 2.0 times higher than the previous serial-parallel DA variable capacitor. In the experimental study, the parallel DA variable capacitor changes the total capacitance from 2.268 to 3.973 pF (0.5 GHz), 2.384 to 4.197 pF (1.0 GHz), and 2.773 to 4.826 pF (2.5 GHz), thus achieving tuning ratios of 75.2%, 76.1%, and 74.0%, respectively. The capacitance precisions are measured to be $6.16{\pm}4.24$ fF (0.5 GHz), $7.42{\pm}5.48$ fF (1.0 GHz), and $9.56{\pm}5.63$ fF (2.5 GHz). The parallel DA variable capacitor shows the total resistance of $2.97{\pm}0.29\;{\Omega}$ (0.5 GHz), $3.01{\pm}0.42\;{\Omega}$ (1.0 GHz), and $4.32{\pm}0.66\;{\Omega}$ (2.5 GHz), resulting in high quality factors which are measured to be $33.7{\pm}7.8$ (0.5 GHz), $18.5{\pm}4.9$ (1.0 GHz), and $4.3{\pm}1.4$ (2.5 GHz) for large capacitance values ($2.268{\sim}4.826$ pF). We experimentally verify the high-Q tuning capability of the present parallel DA variable capacitor, while achieving high-precision capacitance adjustments.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.193-195
• /
• 2020

최근 반도체 제조공정에서 핵심기술의 국산화에 대한 관심이 증가하고 있다. 따라서 제조공정의 하나인 에칭공정의 핵심기술인 RF플라즈마 기술에대한 관심또한 증가하고 있다. 본 논문에서는 그중에서도 RF플라즈마에 사용되는 임피던스 정합기에 사용되는 가변커패시터에 대한 새로운 구조를 제안한다. 최근까지 임피던스 정합기는 기계식으로 가변하는 가변커패시터(Vacuum Variable Capacitor, 이하 VVC)를 주로 사용했다. 하지만 기계식으로 커패시턴스를 가변하기 때문에 공정시간의 상당부분을 정합시간에 소모하게 된다. 따라서 최근에 정합시간을 줄이기 위해 전력전자 기술을 사용하여 전기적으로 커패시턴스를 가변하는 가변 커패시터 (Electrical Variable Capacitor, 이하 EVC)가 개발되고 있다. 그러나 EVC는 부피가 크고 커패시턴스의 해상도가 적다는 문제를 갖는다. 그러므로 본 논문에서는 VVC와 EVC의 장점을 결합하여 새로운 구조의 가변 커패시터인 하이브리드 가변 커패시터 (Hybrid Variable Capacitor, 이하 HVC)를 제안한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.613-614
• /
• 2008

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.839-843
• /
• 2019

This paper demonstrates a variable capacitor using fluids as dielectric material and investigates the possibility of its application to a magnetic resonance microscopy's coil. The capacitor structure was integrated with a microfluidic channel and the capacitance was measured while changing the filling percentage of fluids in the channel. The measured capacitance when filling DI water and mineral oil was changed from 1.7 pF to 12 pF and from 1.7 pF to 2 pF, respectively.

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.115-118
• /
• 2012

Recently, there are a lot of papers in order to replace the electrolytic capacitor into the film capacitor in output of PFC(Power Factor Correction). However, the film capacitor, which has capacitance of low values, causes a large ripple voltage in output of PFC. The LED drivers are connected series in the output of PFC and affected by the magnitude of voltage ripple. In this paper, we have compared the fixed frequency method with the variable frequency for the constant-current control and propose the control method to avoid the sub-harmonic oscillation in the variable input voltage. An 80W PFC, using film capacitors instead of electrolytic capacitors, and LED driver has been built and compared the fixed frequency control method with the variable frequency control method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1053-1060
• /
• 2016

This paper proposes an adaptive equalizer with the digitally controlled active variable capacitor. An equalizing amplifier consists of a main amplifier and a source degeneration RC filter which is implemented using the digitally controlled active variable capacitor for area efficiency and linear loss compensation. The active capacitor changes its capacitance by the amplifier gain control, which is based on miller effect. In the simulated results, the proposed equalizer compensates the high frequency loss and extends the data eye width from 0.31 UI to 0.64 UI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.282-288
• /
• 2014

Recently there have been much interest in the GPS antenna performance improvement. In this paper, we propose very small patch antenna for GPS band. The proposed antenna resonance frequency was adjusted using the ground plane and variable capacitor connected the frame. The fabricated antenna was used a FR4 substrate by considering the difficulty and economical efficiency. Antenna measurement results was obtained good characteristics of VSWR 1.2, the passive antenna gain -0.60 dBi, the active antenna gain of 29 dB in center frequency of 1575.42 MHz GPS band.

• KIEE International Transactions on Power Engineering
• /
• v.3A no.1
• /
• pp.17-26
• /
• 2003

In this paper, the comparative steady-state operating performance analysis algorithms of the stand-alone single-phase self-excited induction generator (SEIG) is presented on the basis of the two nodal admittance approaches using the per-unit frequency in addition to a new state variable de-fined by the per-unit slip frequency. The main significant features of the proposed operating circuit analysis with the per-unit slip frequency as a state variable are that the fast effective solution could be achieved with the simple mathematical computation effort. The operating performance results in the simulation of the single-phase SEIG evaluated by using the per-unit slip frequency state variable are compared with those obtained by using the per-unit frequency state variable. The comparative operating performance results provide the close agreements between two steady-state analysis performance algorithms based on the electro-mechanical equivalent circuit of the single-phase SEIG. In addition to these, the single-phase static VAR compensator; SVC composed of the thyristor controlled reactor; TCR in parallel with the fixed excitation capacitor; FC and the thyristor switched capacitor; TSC is ap-plied to regulate the generated terminal voltage of the single-phase SEIG loaded by a variable inductive passive load. The fixed gain PI controller is employed to adjust the equivalent variable excitation capacitor capacitance of the single-phase SVC.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.3
• /
• pp.161-168
• /
• 2019

This study introduces a new topology to decrease the voltage stress experienced by a 13.56 MHz electrical variable capacitor (EVC) circuit with an asymmetrical switch structure applied to the impedance matching circuit of a radio frequency (RF) plasma system. The method adopts a symmetrical switch structure instead of an asymmetrical one in each of the capacitor's leg in the EVC circuit. The proposed topology successfully reduces voltage stress in the EVC circuit due to the symmetrical charging and discharging mode. This topology can also be applied to the impedance matching circuit of a high-power and high-frequency RF etching system. The target features of the proposed circuit topology are investigated via simulation and experiment. Voltage stress on the switch of the EVC circuit is successfully reduced by more than 40%.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2317-2323
• /
• 2017

Recently, linear compressors of cooling systems such as refrigerators, which have a free piston driven by a linear motor, have attracted much attention because of their high efficiency. For structural reasons, linear compressors applied in refrigerators should use an AC capacitor to ensure stable control. However, AC capacitors are expensive and bulky. In this paper, we propose a new method to realize stable control without a real AC capacitor by implementing a virtual AC capacitor with software. To realize a virtual AC capacitor, a pure integral is calculated. Nonetheless, if an offset current exists, the calculation may diverge to infinity. To solve this problem, a high-pass filter is applied and the compensation for the phase angle and magnitude are realized with a new method. Finally, a virtual AC capacitor enables variable frequency operations. Hence, in case of a lack of voltage, we can compensate by running the linear compressor in high-frequency operations. To improve efficiency, we may optimize the operation frequency. The validity of a virtual AC capacitor has been verified through simulations and experimental results.