• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.15-21
• /
• 2015

The purpose of this paper is to analyze thermal characteristics of the heat sinks to maximize the thermal diffusivity for LED floodlight. The 2 kind of samples were prepared by vapor chamber manufacturing technology using the heat pipe principle. It was analyzed the maximum temperature reduction effect and the thermal diffusion from the heat source depending on the types of chambers with 3 kind of working fluids. As a result, it was confirmed that thermal conductivity 23% increased, GVC-R type than IVC-R type.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.767-768
• /
• 2006

In this study, copper vapor chambers with built-in cooling fins, which eliminated the soldered or brazed joints in the conventional vapor chamber, were fabricated using the metal injection molding process. The results show that with optimized molding parameters, fins with an aspect ratio up to 18 could be produced. After sintering, the densities of the fin and chamber reached 96%. With only 32 cooling fins and a small fan installed, the thermal resistance of the heat sink was $1.156^{\circ}C/W$, and the power dissipation was 40W when the junction temperature was $70^{\circ}C$. When copper powder was sintered onto the chamber to make a vapor chamber, the thermal resistance decreased to $1.046^{\circ}C/W$.

• 한국표면공학회지
• /
• 제56권6호
• /
• pp.341-352
• /
• 2023

This paper reviews the potentials of a rotary chemical vapor deposition (RCVD) process for nanomaterial synthesis and coating on powder-based materials. The rotary reactor offers a significant improvement over traditional CVD methods having horizontal and fixed reaction chambers. The RCVD system yields enhanced productivity and surface coating uniformity of nanoparticles applied in various purposes, such as efficient heat dissipation, surface hardness enhancement, and enhanced energy storage performances. The effectiveness of the RCVD system would open up new possibilities in various applications because uniform coating on powder-based materials with massive productivity is inevitable to develop multi-functional materials with high reliability.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권1호
• /
• pp.9-18
• /
• 2002

Thermal humidity characteristics were considered theoretically and experimentally. A Simply well-fitted correlation of a saturated vapor pressure-temperature curve of water was introduced based on Antoine equation to make theoretical prediction of relative humidity according to temperature variation. Characteristics of dew point were also examined theoretically and its relation with temperature and humidity was evaluated. The exact mass of water vapor in a specified humidity and temperature condition was estimated to provide useful insight into the idea about how much amount of water corresponds to a specified humidity and temperature condition in a confined system. A simple but well-fitting model of dehumidification process was introduced to anticipate the trend of relative humidity level during GN2(gaseous nitrogen) purge process in a humidity chamber. Well-suitedness of this model was also verified by comparison with experimental data. The overall appearance and specification of two thermal humidity chambers were introduced which were used to perform various thermal humidity tests in order to yield useful data necessary to support validity of theoretical models.

• 반도체디스플레이기술학회지
• /
• 제14권2호
• /
• pp.61-65
• /
• 2015

SiC composite materials are usually used to very high temperature condition such as thermal protection system materials at space vehicles, combustion chambers or engine nozzles because they have high specific strength and good thermal properties at high temperature. One of the most widely used fabrication methods of SiC composites is the chemical vapor infiltration (CVI) process. During the process, chemical gases including Si are introduced into porous preform which is made by carbon fibers for infiltration. Since the processes take a very long time, it is important to reduce the process time in designing the reactors and processes. In this study, both the gas flow and heat transfer in the reactors during the processes are analyzed using a computational fluid dynamics method in order to design reactors and processes for uniform, high quality SiC composites. Effects of flow rate and heater temperature as process parameters to the infiltration process were examined.

• 태양에너지
• /
• 제5권2호
• /
• pp.46-53
• /
• 1985

Hydrogenated amorphous silicon solar cells which are fabricated by photo-chemical vapor deposition (photo-CVD) system has been investigated. In the photo-CVD system which consists of three separate reaction chambers, low-pressure mercury lamp has been used as a light source. The main reactant ($Si_2H_6/He$) gases which are premixed with a small amount of mercury vapor in a mercury-vaporizer kept at $50^{\circ}C$ have been used. Using $C_2H_2$ and $SiH_2(CH_3)_2$ as the carbon source, p-type wide band gap a-SiC:H films have been obtained. The result has been found that the undoped layers of the pin/substrate solar cells are influenced by the residual impurities, such as phosphorus and boron during the deposition process. By minimizing the effect of the impurities in the i-layer and optimizing conditions at the p-layer and p/i interface, the energy conversion efficiency of 9.61 % under AM-1 ($100mW/Cm^2$) has been achieved for pin/substrate solar cells illuminated through their p-layers, using the three separate reaction chamber apparatus. It is expected that a-SiC:H solar cells with the energy conversion efficiency over 10% have been fabricated by Photo-CVD method.

• 한국가구학회지
• /
• 제20권6호
• /
• pp.599-604
• /
• 2009

For the search of unified law of moisture movement in wood, moisture distribution of Korean red pine at non-steady state was investigated. We assume that the equilibrium moisture content (EMC) in wood depends on only temperature and relative humidity, it can be control in temperature and humidity chamber. If temperature is constant and humidity or vapor pressure is changed with sin curve shape at adequate cycles, EMC in chamber can be changed as well with sin-curve shape. The setup condition of a non-steady state in humidity control chambers is a constant temperature at $20^{\circ}C$ and 15+10 sin ${\omega}t$ percent EMC. It can be found that the distribution of moisture in the specimen with varying relative humidity are illustrated various types. Moisture in wood is complicated and vibrates with the moisture sorption process. Considering a unified law of moisture movement in wood, it is considered that the most important fact is to search the method of precise diffusion & transfer coefficients.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.923-929
• /
• 2002

We discuss scheduling analysis for a discrete event system with time windows of which firing or holding time delays are subject to random variation within some finite range. To do this, we propose a modified p-lime Petri net, named p+-time Petri net. We develop a condition for which a synchronized transition does not have a dead token, that is, the firing epochs do not violate the time window constraints. We propose a method of computing the feasible range of the token sojourn time at each place based on a time difference graph. We also discuss an application for analyzing wafer residency times within the process chambers for a dual-armed cluster tool for chemical vapor deposition.

• Composites Research
• /
• 제27권4호
• /
• pp.123-129
• /
• 2014

세라믹 기지 복합재료는 세라믹 기지에 고 용융 온도, 낮은 밀도, 고 탄성과 강도를 가진 탄화물, 질화물, 보론화물, 산화물 등의 강화재료를 끼워 넣어 파괴 인성을 높인 것이다. 이들 소재는 우주 비행체의 열 차폐 시스템, 또 고온의 가스 터빈의 연소실, 터빈 블레이드, 고정자(Stator) 베인 등의 부품에 사용되며, 버너와 화염 유지기(Flame holder), 고온 가스 덕트에는 산화 CMC가 사용되고 있고, 극심한 열 충격이 일어나는 브레이크 디스크나 시스템의 부품, 그리고 슬라이드 베어링 부품에도 활용되고 있다. 이러한 CMC에 대한 연구 개발은 미국의 우주 비행체 활용 목적을 비롯하여, 미국, 일본, 유럽에서의 초고속항공기와 가스 터빈용, 그리고 핵 융합용 등의 목적으로 국방과 에너지 산업과 같은 전략적 분야의 활용을 목표로 개발되고 있다.

• 원예과학기술지
• /
• 제32권3호
• /
• pp.390-399
• /
• 2014

본 연구는 절엽의 보존엽 가공기술을 개발하기 위해서 화훼장식용으로 많이 사용하는 유칼립투스(Eucalyptus cinerea F. Mull. ex Benth.)의 보존엽 제작을 위한 보존염료 처리시 온도, 증기압차(VPD), 광주기 등 환경조건과 침지처리기간이 엽색에 미치는 영향을 구명하고자 수행되었다. 균일한 성숙도의 잎을 가진 유칼립투스 절엽(줄기 포함)을 20cm로 절취한 후 온도(10, 20, 30, $40^{\circ}C$), VPD(0.23, 0.70, 1.16, and 1.61kPa), 광주기(0, 6, 12, 24 h)가 다른 생장상에서 보존염료에 3, 6, 9, 12일간 줄기 하단부를 침지하여 흡수시켰고, 이후 $20^{\circ}C$의 실험실에서 3일간 건조시켰다. 그 결과, 보존염료 처리 시 온도가 낮을수록 신선엽과 비교하여 엽색의 차이가 줄어들어 ${\Delta}E$값이 감소하였다. 특히 고온구에서 갈변현상에 의해 적색도(a)의 증가와 황색도(b)의 감소가 나타났다. VPD는 낮을수록 대조구와의 엽색 차이가 적어 ${\Delta}E$값이 감소하였다. 광주기는 짧을수록 엽색의 변화가 적어 ${\Delta}E$값이 감소하였다. 또한 환경조건에 관계없이 흡수기간이 길어질수록 엽색의 변화가 커져 ${\Delta}E$값이 증가하였다. 보존염료 흡수 후 건조 3일째 줄기와 잎의 유연성은 온도, VPD 및 침지기간이 감소할수록 증가하였다. 따라서, 보존염료 흡수 시 $10-20^{\circ}C$의 암 상태에서 0.23-0.70kPa VPD가 최적 환경조건이라 판단되며, 보존염료 처리기간은 보존엽의 품질 및 경제성 면에서 3일이 적당하다고 판단되었다. 이들 환경조건의 공통점은 증산에 의한 수분 손실 속도를 줄인다는 것으로, 이 범위를 많이 벗어나면 급격한 수분 손실에 의해 황변이나 갈변으로 품질이 떨어지게 된다.