• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.684-689
• /
• 2017

본 연구는 참굴(Crassostrea gigas)의 패각운동을 이용하여, 연안역에서 발생하는 저염수에 대한 조기경보가능성을 살펴보았다. 30 psu와 20 psu에서 패각운동은 각각 $7.32{\pm}3.21$회/hr와 $7.11{\pm}3.90$회/hr였으며, 파형과 횟수는 차이가 없었다(t-test, p>0.001). 하지만 10 psu와 5 psu에서는 모든 개체가 폐각상태를 지속하였다. 수온과 염분의 복합실험결과, Group 1(수온 $15^{\circ}C$ ${\times}$ 염분 15 psu)은 20~30 psu에서 보인 패각운동 후(약 2~3시간), 장시간 폐각을 하였다. Group 2(수온 $30^{\circ}C$ ${\times}$ 염분 15 psu)에서는 Group 1의 패각 개폐운동보다 더 빠르고 자주 나타나, 참굴의 생리적인 위기상황에 대한 신호를 나타내었다. 따라서 이러한 파형은 하계 저염수 출현 시 나타낼 수 있는 조기경보 신호로 충분히 활용될 수 있을 것으로 보인다.

• 한국물환경학회지
• /
• 제36권6호
• /
• pp.559-567
• /
• 2020

The abnomal responseses on growth and morphology of attached diatoms by various heavy metals were studied. Ulnaria ulna (Nitzsch) Compère was employed as experimental species and exposed to the five heavy metals such as Cu, Zn, Pb, Cd, and As with four concentrations (0, 0.01, 0.1, and 2 mg L-1), respectively. The samples of Ulnaria ulna were examined on the changes of cell growth and teratological forms on the 7th, 14th, 21th, and 28th day, respectively, after exposure to the heavy metals. The samples exposed to the highest concentration, 2.0 mg L-1, of all the heavy metals showed the most obvious decreases of growth. The samples exposed to Cd (μ=0.049day-1) and As (μ=0.048day-1) showed the highest decreasing rate of growth (p=0.021(Cd), p=0.002(As)) and the highest morphological changes of diatom valves were also samples exposed to Cd (10.41%) and As (10.13%) (p=0.009 (Cd), p=0.005(As)). In contrast, Pb induced the lowest decreasing rate (μ=0.090 day-1) and the least change in valve morphology (3.31%). The Cd and As showed relatively stronger effects on growth rates compared to Cu, Zn, and Pb. For the percentage of emergence of morphological species by the type, the highest percentage were observed in sampled exposed to type 1 (43.4%) and followed by type 2 (29.1%). The type 2 and 4 were most abundant in samples exposed to Zn and Pb while the type 3 was most abundant in Cd and As. The Cu induced only type 1, suggesting that the frequency of emergence of each type varied among hevay metals. This research suggests that the degrees of abnomal changes on growth rate and valve morphology of Ulnaria ulna can be used as a bioindicater species for heavy metal contamination in freshwater.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.443-449
• /
• 2022

In this study, in order to improve the disadvantages of the environmental error of the infusion set that performs infusion therapy in the existing clinical practice and to maximize the user's convenience by miniaturizing the existing infusion pump system, the structure of the muscle pump of the human vein was imitated. As a double check valve method, a method for preventing the backflow of fluid and discharging a constant fluid in one direction by external pressure was proposed. The proposed bio-mimic muscle pump uses a check valve that controls the flow of fluid in one direction and a silicone tube with elasticity, and a chamber is constructed. A peristaltic pump for applying intermittent pressure to the tube chamber was constructed using a multi-cam structure roller. In order to verify the performance of the proposed pump, optimization was performed while changing the number of multi-cam rollers and adjusting the speed of the roller driving motor, and the reproducibility of the instantaneous discharge amount and the continuous discharge amount of the pump was compared and tested. The performance of the muscle pump proposed in this study was verified through experiments that it can inject up to 1L of fluid within 12 hours, and that it is possible to inject the fluid with an accuracy of ±0.1ml. Real-time monitoring of the fluid injection volume through the bio-mimic muscle pump proposed in this study not only increases the convenience of the administrator, but also provides a precise fluid administration environment to more patients at a low cost, and additionally applies bubble detection and occlusion detection technology If so, it is believed that a safer medical environment can be provided to patients.

• 제어로봇시스템학회논문지
• /
• 제22권2호
• /
• pp.147-152
• /
• 2016

This paper proposes a new TPC (Transmission Priority Change) algorithm which is used to diagnose failures of a CAN (Controller Area Network) based network system for the oil tank monitoring. The TPC algorithm is aimed to increase the total amount of data transmission and to minimize the latency for an urgent message by changing transmission priority. The urgency of the data transmission has been determined by the conditions of sensors. There are multiple sensors inside of the oil tank, such as temperature, valve, pressure and level sensors. When the sensors operate normally, the sensory data can be collected through the CAN network by the monitoring system. However when there is a dangerous situation or failure situation happened at a sensor, the data need to be handled quickly by the monitoring system, which is implemented by using the TPC algorithm. The effectiveness of the TPC algorithm has been verified by the real experiments. In addition, this paper introduces a method that people can figure out the condition of oil tanks and also can perform the fault diagnosis in real-time by using transmitted packet data. By applying this TPC algorithm to various industries, the convenience and reliability of multiple sensors network system can be improved.

• Smart Structures and Systems
• /
• 제19권2호
• /
• pp.151-161
• /
• 2017

A new method is developed to estimate road profile in order to estimate IRI based on the ASTM standard. This method utilizes an accelerometer and a Dynamic Tire Pressure Sensor (DTPS) to estimate road roughness. The accelerometer measures the vertical axle acceleration. The DTPS, which is mounted on the tire's valve stem, measures dynamic pressure inside the tire while driving. Calibrated transfer functions are used to estimate road profile using the signals from the two sensors. A field test was conducted on roads with different quality conditions in the city of Brockton, MA. The IRI values estimated with this new method match the actual road conditions measured with Pavement Condition Index (PCI) based on the ASTM standard, images taken from an onboard camera and passengers' perceptions. IRI has negative correlation with PCI in general since they have overlapping features. Compared to the current method of IRI measurement, the advantage of this method is that a) the cost is reduced; b) more space is saved; c) more time is saved; and d) mounting the two sensors are universally compatible to most cars and vans. Therefore, this method has the potential to provide continuous and global monitoring the health of roadways.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.663-665
• /
• 2000

For the control system of thermal turbine in fuel and nuclear power plant, as high reliability and availability are required, redundant control system is generally applied. This paper presents the configuration and design of such a redundant control system that can be suitable for control and monitoring of the turbine. System components such as I/O system, communication networks, voting system are designed, and especially the new intelligent voter using serial communication are proposed. The characteristics of the implemented control system is independence of the control, protection and monitoring functions, and discrimination of the redundancies, and high availability. The control functions such as speed control, load control, valve control and protective functions such as overspeed and PLU are designed in detail.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.454-459
• /
• 2017

본 논문에서는 최근 매장량의 한계로 인한 화석연료의 가격 상승과 그에 따른 환경적인 문제를 해결하고자 태양광 모듈이 부착된 PTC 집열기 및 3웨이 밸브를 이용한 온열 시스템을 설계 하고자 한다. 온열 시스템은 태양광 모듈이 부착된 태양열 PTC 집열기 사용을 전제로 3웨이 밸브를 이용한 온풍 및 난방 제어 시스템으로써 온도 센서부, 모드 설정부(온풍 및 난방 모드부), 공급부, 온열 시스템 제어부를 포함하여 구성된다. 온도 센서부는 배관 및 실내 온도 표시, 온도 설정부 다중 모니터링 기능이 있으며 모드 설정부는 온풍 및 난방모드 전환, 온풍 및 난방모드 온도 설정 기능을 수행한다. 또한, 온열 시스템 제어부는 PTC 제어 및 온도 설정, PTC 주야 및 시간 선택, 온풍 및 난방 제어, 3웨이 밸브 선택, 등의 기능을 수행한다. 따라서, 태양광 모듈이 부착된 태양열 PTC 집열기 및 3웨이 밸브을 이용한 온열 시스템 설계에 대한 연구 결과 온도 센서부는 $680{\mu}s$, 모드 설정부는 $700{\mu}s$, 온열 시스템 제어부는 $610{\mu}s$의 안정적인 동작 속도로 구동되는 것을 확인 할 수 있었다.

• 융합신호처리학회논문지
• /
• 제19권1호
• /
• pp.14-19
• /
• 2018

최근 건강에 대한 관심과 욕구가 크게 증가하고 있으며, 이에 따라 스마트 헬스케어 산업이 크게 주목받고 있다. 이로 인해 일상생활 중 자신의 건강 상태를 지속적으로 확인하기 위한 원격의료시스템뿐만 아니라, 최근에는 국내외 기업에서 언제 어디서나 신체의 활동 정보를 계측 할 수 있는 웨어러블 디바이스들을 지속적으로 연구개발 및 시장에 선보이고 있다. 특히, 맥파와 심전도는 일상생활 중 자신의 건강상태를 지속적으로 모니터링하기 위한 생체신호로 가장 많이 활용되고 있다. 본 연구에서는 마이크 센서를 활용한 심장의 소리 즉, 심음의 계측을 통해 심장 활동 상태 모니터링이 가능한 시스템을 구현하고자 하며, 상용 전자 청진기과 비교평가를 통해 일상생활 중 지속적인 모니터링이 가능함을 확인 하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.750-750
• /
• 2002

The Airship PKNU is a roughly 12 m (32 ft) long blimp, filled with helium, whose two-gasoline power(3hp per engine) are independently radio controlled. The motors and propellers can be tilted and are attached to the gondola through an axle and supporting braces. Four stabilizing fins are mounted at the tail of the airship. To fill in the helium, a valve is placed at the bottom of the hull. The inaugural flight was on jul. 31.2002 at the Pusan, S.korea Most environment monitoring system\ problem use satellite image. But, Low resolution satellite image (multi-spectral) : 1km ∼ 250 m ground resolutions is lows. So, detail information acquisition is hard at the complex terrain. High resolution satellite image (black and white) 30m : The ground resolution is high. But it is high price, visit cycle and delivery time is long So. We want make high accuracy airship photogrammetry system. This airship can catch picture Multi. spectral Aerial photographing (visible, Near infrared and thermal infrared), and High resolution (over 6million pixel). It can take atmosphere datum (Temperature (wet bulb, dew point, general), Pressure (static, dynamic), Humidity, wind speed). this airship is very Quickness that aircraft install time is lower than 30 minutes, it is compact and that conveyance is easy. High-capacity save image (628 cut per 1time (over 6million and 4band(R,G,B,NIR)) and this airship can save datum this High accuracy navigatin (position and rotate angle) by DGPS tech. and Gyro system. this airship will do monitor about red-tide, sea surface temperate, and CH-A, SS and etc.

• 한국정보통신학회논문지
• /
• 제11권6호
• /
• pp.1207-1213
• /
• 2007

기존의 수도설비의 밸브실과 유량계의 관리는 기계적이고 숙련자의 경험적인 방식으로 이루어져 왔다. 그러나 USN 기반의 실시간 수도설비 모니터링 시스템을 활용한 시설물 관리는 안전성과 정확성을 제공함으로서 양질의 수자원을 관리하는데 기술적인 발전을 가져올 수 있다. 따라서 본 연구는 USN(Ubiquitous Sensor Network)과 CDMA(Code Division Multiple Access) 망을 이용한 수도 시설물의 안전 관리 시스템에 관하여 연구하였다. 수도 설비 중에서 밸브실과 유량계실을 대상으로 유량계, 압력센서, 진동센서, Co센서, 온 습도센서들의 RFID(Radio-frequency identification) 센서로 구성된 USN을 구성하고, USN으로부터 실시간으로 수도 시설물 정보 및 수(水)처리 측정 정보를 수집하여, CDMA망을 통해 원거리 관제 시스템에 전송한다. USN 기술을 이용하여 수도설비를 관리함으로서 현장에서의 편리성, 안전성, 정확성을 높여 더욱 효율적이고 안정적으로 깨끗한 수돗물을 공급하는데 기여할 수 있다.