• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.322-325
• /
• 2005

The separation mechanism is installed to separate a note one by one from the stacked notes and the overlap type, one of separation mechanism, has been used a lot in financial equipments like ATM. This paper has compared and estimated analysis results using finite element method with experimental results over various parameters such as conditions of note, overlap value, roller shapes, which affect the friction force (resistance) exerting on notes between rollers. Consequently, the effect of various parameters on the performance of overlap type separation mechanism can be known and optimal shape and overlap value can be obtained.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.1-9
• /
• 2006

The single lap joint is the most studied joint in the literature in terms of both theory and practice. It is easy to manufacture and the lap shear strength is a useful value for strength assessment and quality control. Simple design rules exist such as the one present in standard ASTM 1002 or in a recent paper by Adams and Davies. The main factors that have an influence on the lap shear strength are the type of adhesive, i.e. ductile or brittle, the adherend yield strength and the overlap length. The overlap increases the shear strength almost linearly if the adhesive is sufficiently ductile and the adherend does not yield. For substrates that yield, a plateau is reached for a certain value of overlap corresponding to the yielding of the adherend. For intermediate or brittle adhesives, the analysis is more complex and needs further investigation. In order to quantify the influence of the adhesive, the adherend and the overlap on the lap shear strength, the experimental design technique of Taguchi was used. An experimental matrix of 27 tests was designed and each test was repeated three times. The influence of each variable could be assessed as well as the interactions between them using the statistical software Statview. The results show that the most important variable on the lap shear strength is the overlap length followed by the type of adherend.

• Radiation Oncology Journal
• /
• 제32권1호
• /
• pp.23-30
• /
• 2014

Purpose: The goal of this study is to determine whether the magnitude of overlap between planning target volume (PTV) and rectum ($Rectum_{overlap}$) or PTV and bladder ($Bladder_{overlap}$) in prostate cancer volumetric-modulated arc therapy (VMAT) is predictive of the dose-volume relationships achieved after optimization, and to identify predictive equations and cutoff values using these overlap volumes beyond which the Quantitative Analyses of Normal Tissue Effects in the Clinic (QUANTEC) dose-volume constraints are unlikely to be met. Materials and Methods: Fifty-seven patients with prostate cancer underwent VMAT planning using identical optimization conditions and normalization. The PTV (for the 50.4 Gy primary plan and 30.6 Gy boost plan) included 5 to 10 mm margins around the prostate and seminal vesicles. Pearson correlations, linear regression analyses, and receiver operating characteristic (ROC) curves were used to correlate the percentage overlap with dose-volume parameters. Results: The percentage $Rectum_{overlap}$ and $Bladder_{overlap}$ correlated with sparing of that organ but minimally impacted other dose-volume parameters, predicted the primary plan rectum $V_{45}$ and bladder $V_{50}$ with $R^2$ = 0.78 and $R^2$ = 0.83, respectively, and predicted the boost plan rectum $V_{30}$ and bladder $V_{30}$ with $R^2$ = 0.53 and $R^2$ = 0.81, respectively. The optimal cutoff value of boost $Rectum_{overlap}$ to predict rectum $V_{75}$ >15% was 3.5% (sensitivity 100%, specificity 94%, p < 0.01), and the optimal cutoff value of boost $Bladder_{overlap}$ to predict bladder $V_{80}$ >10% was 5.0% (sensitivity 83%, specificity 100%, p < 0.01). Conclusion: The degree of overlap between PTV and bladder or rectum can be used to accurately guide physicians on the use of interventions to limit the extent of the overlap region prior to optimization.

• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.758-763
• /
• 2003

A profile shifted gear system was analyzed to select the optimum profile shift coefficient, which minimizes gear teeth deflection. Contact force and deformation overlap were calculated by means of FEM and contact theory. The deformation overlap is suggested for an effective indicator to represent the whole deformation of gear system. The optimum value of profile shift coefficients was presented with respect to the deformation of gear system.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권3호
• /
• pp.161-167
• /
• 2020

This study aimed to found out the effect of patellofemoral overlap distance by changing femur thickness and center X-ray angles in Merchant method images. Based on the femur thickness, it suggested tube angle minimizes overlap. It was conducted by Merchant method, a knee tangential view, and the image was obtained by changing the thigh thickness from 14 to 20 cm and the center ray angle from 60°, 57°, 55°. The images were measured by five researchers using a method of measuring the overlap, which was designed by them. The results showed at 60°, 57°, 55° angle, the patellofemoral overlap distance resulted in 0.47±0.66 to 20.89±0.65 cm, 2.26±0.28 to 15.73±0.62 cm, 1.39 ± 0.83 to 12.49 ± 0.37 cm. However, for 57° and 55°, no overlap in thickness under 14.5 and 14 to 15.5 didn't appear. it showed high correlation between femur thickness and overlap. The difference in the mean value of overlap in each group showed a statistically significant difference (p<0.01), all were classified as independent groups in the post-hoc test. In all images, the patellofemoral overlap distance increased as the thickness increased, and at the average thickness of Korean men and women, overlap decreased when reducing center ray. When conducting Merchant tests on Koreans, it was suggested it would be useful to use 57° angle because it minimize the effects of overlap and intrusions of tibia.

• 만화애니메이션 연구
• /
• 통권49호
• /
• pp.87-112
• /
• 2017

중첩은 복수의 이미지들을 겹쳐 놓는 것으로 여러 가지 표현의 목적을 위해 사용된다. 중첩 가운데, 특히 움직임을 표현하기 위한 중첩은 운동의 과정을 분석, 종합하면서 예술의 여러 분야에서 활용되어 왔다. 이러한 움직임을 표현하는 중첩을 '동체중첩'이라고 명명하고, '하나의 화면에 단일 동체의 운동을 동시에 나열해 움직임을 표현하는 기법'으로 정의한다. 동체중첩은 회화와 사진과 같은 평면 예술에서 시작되었는데 이를 '정적인 동체중첩'으로 분류하고, 이를 이어서 영화와 애니메이션과 같은 영상예술로 발전한 동체중첩은 '동적인 동체중첩'으로 분류한다. 이러한 동체중첩의 중심에는 무엇보다도 동체중첩의 독자적인 예술성과 미학을 구현한 노먼 맥라렌의 작품 <빠 드 되>가 위치하며, 이 작품을 중심으로 동체중첩의 핵심 개념을 분석하고 그 선후에 대한 연구를 통해 동체중첩의 맥락과 예술적 성취를 확인한다. 그리고 오늘날 동체중첩은 디지털 테크놀로지의 발달에 힘입어 기술과 차원을 더욱 확장시키고 있다. 신기술을 활용한 새로운 동체중첩의 작업들은 <빠 드 되>를 매체적으로, 그리고 개념적으로 재해석해 동체중첩의 새로운 가능성을 보여 주는데 이러한 동체중첩의 경향과 전망에 관해 살펴본다. 이와 같이 <빠 드 되>를 중심으로 한 동체중첩에 관한 논의는 궁극적으로 동체중첩이 이룬 예술적 성취를 확인하고 그 의미와 새로운 가능성에 대해 고찰하는 계기를 제공한다.

• 한국인터넷방송통신학회논문지
• /
• 제12권3호
• /
• pp.29-35
• /
• 2012

본 논문에서는 MPEG(Moving Picture Experts Group) 영상 디코더에서 영상을 압축, 비교, 복원, 저장한후 디코딩 처리하는 방법을 종래의 픽셀 단위로 처리하는 방법과는 다르게 영상의 단위 화소 주변을 군집화소로 분류한 후 이를 클러스터링하여 오버랩정도를 결정 한다. 오버랩 정도의 임계치값을 결정하는데는 패턴식별을 취한후 샘플 패턴에 대한 기하구조의 파악과 결정함수의 도출로 활용된다. 특징공간이 4차원 이상이면 주어진 패턴 구조를 시각적으로 관찰할 수 없다. 이 때, 분포구조를 고찰해 볼수 있는 방법은 군집중심간의 거리, 군집별 패턴의 수 및 표준편차 등을 이용하는 방법이다. 임계치 값을 넘는 중복화면은 소거되고 넘지않는 군집화면은 패턴인식으로 복원된후 동영상으로 구현된다. 이방법이 기존의 픽셀 단위 처리하는 방법 과는 20%정도의 메모리 감축과 15%정도의 화면 복원에 성능이 향상된 것으로 판정된다.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.26-33
• /
• 2000

In-cylinde flow and mixture formation are key contributors to both idle stability and combustion stability at part load condition in SI engine. The real time measurements of air-fuel ration and in- cylinder residual gas fraction are particularly important to obtain a better understanding of the mechanisms for combustion and emissions especially during cold start and throttle transient condition. This paper reports the cycle resolved measurements of residual gas fraction and equivalence ration near speak plug with value timing change and their effects on combustion characteristics at part load. The results showed that the effect of intake value opening on the residual gas fraction was smaller than that of exhaust valve closing because of the decreases of exhaust gas reverse flow from exhaust port. The variation of equivalence ratio near spark plug increased with the increase of value overlap and it closely related with heat release rate and combustion stability

• 대한기계학회논문집A
• /
• 제33권6호
• /
• pp.560-567
• /
• 2009

This paper was designed to estimate the adhesion strength of galvannealed coatings on steel sheets. The adhesion strength were evaluated using single lap - shear tests where the lap joint was bonded by structural adhesive. Tests were performed for overlap length of 5mm, 10mm and 15 mm and three directions (0, 45, 90) of steel sheets used as the adherend of the overlap joint. After the tests, FE simulations of the single lap-shear test were also carried out to observe the stress distribution in the interface between the adhesive and the coated sheet. The results showed that the joint failure loads obtained from the tensile tests of bonded single lap-joints were the same, regardless of overlap lengths and directions of steel sheets. Also, the failure of galvannealed coatings greatly depended on shear stress distribution in the interface and the value was about 30MPa.

• 항공우주기술
• /
• 제6권2호
• /
• pp.197-204
• /
• 2007

터번로터 팁 형상의 변화에 따른 터보펌프 터빈의 성능변화에 대하여 실험적 연구를 수행하였다. 한국항공우주연구원에서 개발중인 30톤급 터보펌프용에 장착된 초음속 충동형 터빈을 기본 모델로 하여 터번로터 슈라우드 유무 및 팁간극 크기에 따른 터빈성능변화를 측정 비교하였으며, 이와 더불어 노즐-로터 오버랩에 따른 터빈성능 변화 연구도 함께 이루어졌다. 시험 수행 결과, 로터 슈라우드 유무에 따라 터빈성능의 절대량은 크게 변화하나 팁간극의 변화에 따른 터빈효율의 민감도는 초음속 충동형 터빈의 경우 고효율 아음속터빈에 비해 크게 작은 것으로 나타났다. 아울러, 최적 효율을 나타내는 노즐-로터 오버랩 값이 존재하는 것을 실험을 통해 확인하였다.