Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Profile Shift Coefficient of Gear System Considering Teeth Deflection

변형을 고려한 기어 시스템의 전위 계수 선정

  • 박수진 (부산대학교 대학원 기계설계공학과) ;
  • 유완석 (부산대학교 기계공학부)
  • Published : 2003.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

A profile shifted gear system was analyzed to select the optimum profile shift coefficient, which minimizes gear teeth deflection. Contact force and deformation overlap were calculated by means of FEM and contact theory. The deformation overlap is suggested for an effective indicator to represent the whole deformation of gear system. The optimum value of profile shift coefficients was presented with respect to the deformation of gear system.

Keywords

References

  1. Yau, E., Busby, H. R., and Houser, D. R., 1994, 'A Rayleigh-Ritz Approach to Modeling Bending and Shear Deformation of Gear Teeth,' Computer & Structures, Vol. 50, No. 5, pp. 705-713 https://doi.org/10.1016/0045-7949(94)90429-4
  2. Kim, H. R. and Ahn, S. J., 1993, 'A Study on the Design and Experiment for the Profile of Lower-Noise Gear Toothm,' Transaction of the KSME, A, Vol. 17, No. 1, pp. 1-10
  3. Umezawa, K. and Ishikawa, J., 1973, 'Deflection Due to Contact Between Gear Teeth with Finite Width,' Bulletin of the JSME, Vol. 16, No. 97, pp. 1085-1093 https://doi.org/10.1299/jsme1958.16.1085
  4. Wallace, D. B. and Seireg, A.. 1973, 'Computer Simulation of Dynamic Stress, Deformation, and Fracture of Gear Teeth,' Transactions of the ASME, Journal of Engineering for Industry, Vol. 95, No. 4, pp. 1108-1114 https://doi.org/10.1115/1.3438258
  5. Sfakiotakis, V. G., Vaitsis, J. P. and Anifantis, N. K., 2001, 'Numerical Simulation of Conjugate Spur Gear Action, Computers & Structures, Vol. 79, No. 12, pp. 1153-1160 https://doi.org/10.1016/S0045-7949(01)00014-1
  6. Gagnon, P., Gosselin, C. and Cloutier, L., 1997, 'Analysis of Spur and Straight Bevel Gear Teeth Deflection by the Finite Strip Method,' Transactions of the ASME, Journal of Mechanical Design, Vol. 119, pp. 421-426 https://doi.org/10.1115/1.2826385
  7. Fukunaga, K., 1987, 'A Strength Analysis of Spur Gears including Ratio of Contact,' JSME, Transactions Series C, Vol. 53, No. 489, pp. 1071-1076 https://doi.org/10.1299/kikaic.53.1071
  8. Stegemiller, M. E., 1993, 'A Three-dimensional Analysis of the Base Flexibility of Gear Teeth,' Transactions of the ASME, Journal of Mechanical Design, Vol. 115, pp. 186-192 https://doi.org/10.1115/1.2919317
  9. South, D. W. and Mancuso, J. R., 1994, Mechanical Power Transmission Components, Marcel Dekker, Inc., pp. 511-531
  10. Huh, G. J., 1991, 'Constrained Variational Approach for Dynamic Analysis of Elastic Contact Problems,' Finite Element in Analysis and Design, Vol. 10, pp. 125-136 https://doi.org/10.1016/0168-874X(91)90037-Y
  11. Van de Panne and Whinstone, A., 1964, 'The Simplex and the Dual Method for Quadratic Programming,' Operational Research Quarterly, Vol. 15, No. 4, pp. 355-388 https://doi.org/10.2307/3007121
  12. Colbourne, J. R., 1987, The Geometry of Involute Gears, Springer-Verlag, New-York, pp. 212-218, 162-163
  13. Park, C. I. and Lee, J. M., 2002, 'Experimental Investigation of the Effect of Load Errors on Helical Gear and Bearing Vibration Transmission Characteristics,' KSME Int'l journal, Vol. 16, No. 11, pp. 1395-1403